CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 1114.

chrysophylax

legendary

Activity: 2912

Merit: 1091

--- ChainWorks Industries ---

there seems to be an issue with mining quark and extranonce2 size errors on yaamp ...

no matter what settings or type of mining ( direct to the pool or through donation link ) there ALWAYS seems to be errors ...

the donation link for quark will be changed to westhash to see if that has similar / the same issues - if any at all ...

you can see via this link - http://yaamp.com/?address=1CTiNJyoUmbdMRACtteRWXhGqtSETYd6Vd - how erratic quark is ... yet x11 doesnt seem to have this issue - and if there are any errors under x11 - they are quickly corrected by the yaamp stratum / ccminer ...

the process may be watched from this link - https://www.westhash.com/index.jsp?p=miners&a=12&addr=1CTiNJyoUmbdMRACtteRWXhGqtSETYd6Vd - which is not active yet but will be in the next couple of hours ... or join in and test also ...

same addresses as before - but quark will be on westhash this time around ...

x11 - donate.granitecoinx.com:7999 ...
quark - donate.granitecoinx.com:7919 ...

any input / advice would be very much welcomed ...

v48 seems to be quite stable with the -g parameter ... but the hashrate really isnt a great deal more on the pool side ...

will continue to let it run for another hour ...

after all - it is STILL donating even while we are testing Wink

...

#crysx

flipclip

member

Activity: 111

Merit: 10

From "VER=1.5.48-git(SP-MOD)" when I run:
ccminer --algo=quark -d 0,1 -i 22 -g 4 --url=stratum+tcp://yaamp.com:4033 --user=blahblah --pass=x

From the console I only get:
GPU #0: GeForce GTX 750 Ti, #####

While without the -g parameter I get:
GPU #0: GeForce GTX 750 Ti, #####
GPU #1: GeForce GTX 750 Ti, #####

DragonSlayer

full member

Activity: 181

Merit: 100

None of the release seen to have -g working in conjunction with -d. Here is my command line. I am mining with gtx980. I need to use the -d parameter due to having a gtx66ti for phyx while gaming.

ccminer.exe -q -a x11 -o http://192.168.1.4:7903 -u XfVMCaqKYmmbCCQHynbFyBmpbRVu93o9eD+.004 -p 1234 -g 2 -d 0

I like the work you are doing here.

Thanks

scryptr

legendary

Activity: 1797

Merit: 1028

RELEASE 1.5.48--

The new release pushed my GTX 960 SSC up from 10Mh/s to 10.4Mh/s mining Quark. I'll be rolling it out on my other rigs next. --scryptr

chrysophylax

legendary

Activity: 2912

Merit: 1091

--- ChainWorks Industries ---

Quote from: scryptr on April 29, 2015, 07:27:00 PM

Quote from: chrysophylax on April 29, 2015, 07:14:46 PM

Quote from: scryptr on April 29, 2015, 12:03:37 PM

Quote from: chrysophylax on April 29, 2015, 09:36:35 AM

hi all ...

the donation stratum address is now active and can be mined directly ...

looks like yaamp had a major hiccup and dummy spit - with extranonce2 size errors - as can be seen by the graphs of sp's btc address on yaamp ... this issue looks like it affected all the miners - and was caused by yaamps stratum ... but it all seems to be going ok now ... we will see how it goes for the next few hours and check it again when i wake ...

so now we have sp donation - x11 and quark ...

just point miners to the following address and ports if you wish to donate in this way to sp - any username / any password ...

x11 - donate.granitecoinx.com:7999 ...
quark - donate.granitecoinx.com:7919 ...

remember these are still test environments and the address will more than likely change to - donate.granitecoin.com:portnumber - when it is setup permanently ...

just for examples sake - our mining settings for gigabyte 750ti oc lp cards in linux scripts or commandline are as follows ...

./ccminer -o stratum+tcp://donate.granitecoinx.com:7999/ -O chrysophylax.test:x -a x11 -i 20.6
./ccminer -o stratum+tcp://donate.granitecoinx.com:7919/ -O chrysophylax.test:x -a quark -r 3 -R 10 -i 23.7

./ccminer would be replaced with ccminer.exe to be used for windows batch files if you have the same cards ( probably with different parameters also ) ...

we hope this is ok so far ... the other algos will be setup tomorrow and the list of algo / port messaged here ...

#crysx

HAMPSTER ON THE WHEEL FOR YA, MATE!

I just hooked up to your donation proxy. Great implementation! I'll leave the critter there a while. Any way we can view the action online?

EDIT: I just looked up the donation wallet on Yaamp. All is good! Grin

--scryptr

awesome ...

yaamp has a habit of bombing out ( directly or via proxy ) with extranonce2 errors ... especially with quark ...

how did it go for your donation session? ...

just woke and catching up - so apologies for the late responses ...

i really dont like these time zone issues ...

#crysx

DONATION PROXY--

It went well for a while, and then I started getting too many errors. I'll keep trying it once or twice a day.

--scryptr

i get the same thing with quark - not an issue with x11 ... whether connected directly or through the donation link ...

when all the jobs are done today - some of the other algos will go up - and we can see if they run smooth or not ...

so far - x11 is the only one with out issue on yaamp ...

it might be an issue on the side of yaamp - or even ccminer handling the extranonce ...

any ideas? ... sp? ...

#crysx

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: chrysophylax on April 29, 2015, 07:14:46 PM

Quote from: scryptr on April 29, 2015, 12:03:37 PM

Quote from: chrysophylax on April 29, 2015, 09:36:35 AM

hi all ...

the donation stratum address is now active and can be mined directly ...

looks like yaamp had a major hiccup and dummy spit - with extranonce2 size errors - as can be seen by the graphs of sp's btc address on yaamp ... this issue looks like it affected all the miners - and was caused by yaamps stratum ... but it all seems to be going ok now ... we will see how it goes for the next few hours and check it again when i wake ...

so now we have sp donation - x11 and quark ...

just point miners to the following address and ports if you wish to donate in this way to sp - any username / any password ...

x11 - donate.granitecoinx.com:7999 ...
quark - donate.granitecoinx.com:7919 ...

remember these are still test environments and the address will more than likely change to - donate.granitecoin.com:portnumber - when it is setup permanently ...

just for examples sake - our mining settings for gigabyte 750ti oc lp cards in linux scripts or commandline are as follows ...

./ccminer -o stratum+tcp://donate.granitecoinx.com:7999/ -O chrysophylax.test:x -a x11 -i 20.6
./ccminer -o stratum+tcp://donate.granitecoinx.com:7919/ -O chrysophylax.test:x -a quark -r 3 -R 10 -i 23.7

./ccminer would be replaced with ccminer.exe to be used for windows batch files if you have the same cards ( probably with different parameters also ) ...

we hope this is ok so far ... the other algos will be setup tomorrow and the list of algo / port messaged here ...

#crysx

HAMPSTER ON THE WHEEL FOR YA, MATE!

I just hooked up to your donation proxy. Great implementation! I'll leave the critter there a while. Any way we can view the action online?

EDIT: I just looked up the donation wallet on Yaamp. All is good! Grin

--scryptr

awesome ...

yaamp has a habit of bombing out ( directly or via proxy ) with extranonce2 errors ... especially with quark ...

how did it go for your donation session? ...

just woke and catching up - so apologies for the late responses ...

i really dont like these time zone issues ...

#crysx

DONATION PROXY--

It went well for a while, and then I started getting too many errors. I'll keep trying it once or twice a day.

--scryptr

chrysophylax

legendary

Activity: 2912

Merit: 1091

--- ChainWorks Industries ---

Quote from: sp_ on April 29, 2015, 01:31:01 PM

I submitted a fix for the cpu usage in multiple threads.

x11 750ti settings:

-i 19 -g 3 -a x11

seems to run faster than default.

around 150Khash faster per 750ti.

Look at the power graph, only 60-90% tdp. With overclocking/voltage the hashrate gets much higher.

test rig still running with previous settings ... hashrates look like they are all over the place ...

will reclone and recompile with the same parameters to see if its more stable with the latest release ...

late response = australian timezone ...

yup - we the 'lucky' ones here ...

#crysx

chrysophylax

legendary

Activity: 2912

Merit: 1091

--- ChainWorks Industries ---

Quote from: scryptr on April 29, 2015, 12:03:37 PM

Quote from: chrysophylax on April 29, 2015, 09:36:35 AM

hi all ...

the donation stratum address is now active and can be mined directly ...

looks like yaamp had a major hiccup and dummy spit - with extranonce2 size errors - as can be seen by the graphs of sp's btc address on yaamp ... this issue looks like it affected all the miners - and was caused by yaamps stratum ... but it all seems to be going ok now ... we will see how it goes for the next few hours and check it again when i wake ...

so now we have sp donation - x11 and quark ...

just point miners to the following address and ports if you wish to donate in this way to sp - any username / any password ...

x11 - donate.granitecoinx.com:7999 ...
quark - donate.granitecoinx.com:7919 ...

remember these are still test environments and the address will more than likely change to - donate.granitecoin.com:portnumber - when it is setup permanently ...

just for examples sake - our mining settings for gigabyte 750ti oc lp cards in linux scripts or commandline are as follows ...

./ccminer -o stratum+tcp://donate.granitecoinx.com:7999/ -O chrysophylax.test:x -a x11 -i 20.6
./ccminer -o stratum+tcp://donate.granitecoinx.com:7919/ -O chrysophylax.test:x -a quark -r 3 -R 10 -i 23.7

./ccminer would be replaced with ccminer.exe to be used for windows batch files if you have the same cards ( probably with different parameters also ) ...

we hope this is ok so far ... the other algos will be setup tomorrow and the list of algo / port messaged here ...

#crysx

HAMPSTER ON THE WHEEL FOR YA, MATE!

I just hooked up to your donation proxy. Great implementation! I'll leave the critter there a while. Any way we can view the action online?

EDIT: I just looked up the donation wallet on Yaamp. All is good! Grin

--scryptr

awesome ...

yaamp has a habit of bombing out ( directly or via proxy ) with extranonce2 errors ... especially with quark ...

how did it go for your donation session? ...

just woke and catching up - so apologies for the late responses ...

i really dont like these time zone issues ...

#crysx

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: mendoza1468 on April 29, 2015, 04:15:16 PM

Wow excellent work, i get great improvement performence with 2xgtx 970 maybe 5 to 8% 1.5.48
Tested on X11,x13 and quark (x13 get a few not validate on cpu = 1 each min approx)

I have 2 question :
1- what is the -g (what it does and how to use it, is it the number of your gpu ex:if i have 2 gtx970?) Did not find it on the previous page

2- Is it normal on yaamp the you get less of mh/s vs ccminer?
Exemple on quark 31 mh/s ccminer vs 22 mh/s yaamp

Thanks man !!

GPUTHREADS, THREADS, DEVICES--

There are 3 command line flags that control how many threads are processed. The '--gputhreads', or "-g" parameter is currently being developed. It is supposed to be similar to the sgminer switch "-g". The "--threads", or "-t" switch is similar, but primarily works with CPU miners. If you set "-t 16" on a cpuminer running on an Intel quad-core with 8 virtual cores, you will get 2 threads on each core. Remember, the miner is descended from pooler's CPU miner. The "--devices", or "-d" switch specifies the number or identity of the GPUs to use. The "-g" switch is an attempt to assign per-GPU threads to be processed. This info is in the internal help file within ccminer, "--help".

--scryptr

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

Quote from: mendoza1468 on April 29, 2015, 04:15:16 PM

2- Is it normal on yaamp the you get less of mh/s vs ccminer?
Exemple on quark 31 mh/s ccminer vs 22 mh/s yaamp
Thanks man !!

I get full rates on yaamp, but it takes a while. Not sure if they use a PLNS system to reward miners that are not switching pools regulary?

I have just testet build 48 on compute 5.0 (750ti)

you can compare with build 43 wich is compiled for 5.0 only. Get bether rates?

Also use the latest NVIDIA driver.

go6ooo1212

legendary

Activity: 1512

Merit: 1000

quarkchain.io

Quote from: sp_ on April 29, 2015, 04:02:58 PM

Quote from: go6ooo1212 on April 29, 2015, 03:57:02 PM

Which improvement we could expect on QUBIt with GTX970/750Ti

With -g 2 I get this. (2 750ti oclock)

(deleted)

Qubit is not fixed for multiple threads. with -g you get invalid hashes and lower rates on the pool

I was just testing that , but you've located it first

Especially when I have both of the cards on same rig - its total mess using the "g" parameter...

antonio8

legendary

Activity: 1400

Merit: 1000

Quote from: mendoza1468 on April 29, 2015, 04:15:16 PM

Wow excellent work, i get great improvement performence with 2xgtx 970 maybe 5 to 8%
Tested on X11,x13 and quark (x13 get a few not validate on cpu = 1 each min approx)

I have 2 question :
1- what is the -g (what it does and how to use it, is it the number of your gpu ex:if i have 2 gtx970?) Did not find it on the previous page

2- Is it normal on yaamp the you get less of mh/s vs ccminer?
Exemple on quark 31 mh/s ccminer vs 22 mh/s yaamp

Thanks man !!

Not sure about yaamp.

I only show about 3-9 Mh/s of my 11.2 Mh/s on my scrypt asics.

mendoza1468

newbie

Activity: 54

Merit: 0

Wow excellent work, i get great improvement performence with 2xgtx 970 maybe 5 to 8% 1.5.48
Tested on X11,x13 and quark (x13 get a few not validate on cpu = 1 each min approx)

I have 2 question :
1- what is the -g (what it does and how to use it, is it the number of your gpu ex:if i have 2 gtx970?) Did not find it on the previous page

2- Is it normal on yaamp the you get less of mh/s vs ccminer?
Exemple on quark 31 mh/s ccminer vs 22 mh/s yaamp

Thanks man !!

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

Quote from: go6ooo1212 on April 29, 2015, 03:57:02 PM

Which improvement we could expect on QUBIt with GTX970/750Ti

With -g 2 I get this. (2 750ti oclock)

(deleted)

Qubit is not fixed for multiple threads. with -g you get invalid hashes and lower rates on the pool

go6ooo1212

legendary

Activity: 1512

Merit: 1000

quarkchain.io

Which improvement we could expect on QUBIt with GTX970/750Ti

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

- Faster quark on compute 5.2 (gtx 980 + 800Khash)
- Faster skein
- Improved multiple threads perfomance (the -g parameter) on quark,x11,x13,x14,x15,x17 etc

1.5.48(sp-MOD) is available here: (30-april-2015)

https://github.com/sp-hash/ccminer/releases/tag/1.5.48

The sourcecode is available here:

https://github.com/sp-hash/ccminer

flipclip

member

Activity: 111

Merit: 10

Quote from: sp_ on April 29, 2015, 03:38:53 PM

Quote from: flipclip on April 29, 2015, 03:35:02 PM

Can the g parameter be used per device, example two cards set differently with -g 4,3 ? (per if you are running a mix of cards)

you have to do

-d 3,4 and then -g x

thanks

Slava_K

hero member

Activity: 677

Merit: 500

Sorry. Compiling just now.

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

Ifixed the cpu load 10 minutes ago.

Slava_K

hero member

Activity: 677

Merit: 500

last commit - high cpu load (2 cores from 8 ) on single thread (without -g) on x11 and quark...

Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 1114. (Read 2347601 times)