Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 1206. (Read 2347597 times)

Good job as always SP! Lyra2 hash is a bit better.

However, same issue as with x11: Pool does not report the full hashrate. I think this is a ccminer 1.5.x related problem. For the original ccminer-Lyra2RE, pools show the correct hashrate as it is displayed in the miner. Would you mind to include the Lyra2 improvements into djm34's ccminer-Lyra2RE release?

hah well - said , my friend. Too much algos to follow these days

if it was already there, you would have seen it 
(working on it though)

I cant find , do we have neoscrypt available for ccminer ?

New exe file to test. Compiled with compute 30,35,50,52

-faster lyra 12% (Most of the improvement done by Klaus_t)
-faster quark 10%
-fixed HW errors in x11
-fixed compute 3.0 cards.(untested.)

x11, x13, x15 a little bit faster. (Optimized Skein)

The 21th public beta(windows executable) is available here: (21-12-2014)

http://www.filedropper.com/ccminer21

The sourcecode is available here:

https://github.com/sp-hash/ccminer

scrypt or sha256 aren't supported by ccminer. also they aren't profitable to gpu miners because of asic reason why they won't be supported.

And you need to tell in the command line which algo you want to use (and direct to a pool mining that algo/coin specifically).
say I want to mine x11 (time to do some reading to learn about x11) you will type something like that.  
"ccminer -a x11 -o "pool address" -u "username" -p "password"

Furthermore the 670 won't probably works on x11 (so it is a bad example) as it uses instructions which doesn't exist in compute 3.0
(you need to visit cudamining.co.uk and search for a version compatible with compute 3.0).


I personally think, that compute 3.0 should still be included... (wouldn't be too much work actually...)

I have improved quark 10%. (submitted to github)

Try nicehash, coinotron, ...
x11, x13..
i.e. mine x11 @ nicehash and get payed in btc. and that is easiest to setup

well to be fair gtx 670 aint that old still didnt answer the scrypt - sha256 issue tho

Build 20 doesn't work with the old cards. compute 3.0. I have fixed it @github, but need to test some more before building 21.

it was the same results for pool.profitcoin.org and cointellect.com is there any other pool i can test it out at ?

from what i can see ( and what i understand - please correct me if im wrong guys ) you are connecting to a pool that mines bitcoin directly as a pool ...

this means that you are trying to mine using the btc algo - which is sha256 ...

as far as i know - ccminer does not have that algorithm in its arsenal of algo's ...

i just did a --help on the compiled linux version and the list of algorithms is as follows ...

  -a, --algo=ALGO       specify the hash algorithm to use
                        anime       Animecoin
                        blake       Blake 256 (SFR/NEOS)
                        blakecoin   Fast Blake 256 (8 rounds)
                        deep        Deepcoin
                        dmd-gr      Diamond-Groestl
                        fresh       Freshcoin (shavite 80)
                        fugue256    Fuguecoin
                        groestl     Groestlcoin
                        heavy       Heavycoin
                        jackpot     Jackpot
                        keccak      Keccak-256 (Maxcoin)
                        luffa       Doomcoin
                        lyra2       VertCoin
                        mjollnir    Mjollnircoin
                        myr-gr      Myriad-Groestl
                        nist5       NIST5 (TalkCoin)
                        penta       Pentablake hash (5x Blake 512)
                        quark       Quark
                        qubit       Qubit
                        s3          S3 (1Coin)
                        x11         X11 (DarkCoin)
                        x13         X13 (MaruCoin)
                        x14         X14
                        x15         X15
                        x17         X17 (peoplecurrency)
                        whirl       Whirlcoin (old whirlpool)

i could be wrong - but btcdig.com is a stratum server for sha256 ... and ccminer ( if you dont specify an algo ) defaults to scrypt ...

what you need is one of the other miners that they list on their website ...

can anyone verify this please? ...

#crysx

screen shot below:
http://imgur.com/QYfPX9Y

what settings do you have on the commandline?

#crysx

hey chrys can u tellme whats wrong ?

cc miner now goes like this

Stratum difficulty set to 20
66.55.92.73:8000 x11 block 509104
GPU #0: GeForce gtx670 2222 kh/s
GPU #0 ~~~~
66.55.92.73:8000 x11 block 509105
GPU #0 ~~~~

Does this mean it is working properly ? Coz miner is not showing  active on site.

Also stratum connection timed out
Stratum connection interrupted - every 2 mins.

which ccminer is it - url/link please?

im setting a windows system up and want to test the 750ti oc on that ...

tanx in advance ...

#crysx

anyone else get frequent crashes?  I run on three separate win8 rigs and all occasionally get a pop-up window saying the ccminer.exe stopped working.  Or, sometimes it stops working without a pop-up window.

It's not bad but of course very noticeable when the original/slower ccminer doesn't crash at all.  And the crashes aren't too frequent but at least once in 24 hours so I check it daily.  I know I could do some other monitor things or just set it to restart every 12 hours but... I'm lazy!  And... just wanted to bring it up for any discussion.

thx

sorry my bad din c but ne ways gt it all working nw

but no shares it just shows block n kh/s

STUPID???

after WE try and help you 'bro' ...

after YOU post that you are using SGMINER in the very first post and THEN ask 'what is X11?' ...

mate - i dont know where you are from - but here in australia - we help people the best way we can and the best way we UNDERSTAND from what YOU have written ...

stupid huh?

if WE are so stupid - what the hell are YOU doing here asking the bloody questions in the first place ...

#crysx

bro r u guys stupid... ?



The above posts I made refferred to cc miner with the algorithm.

I Just wnna know about that cpu nonsense keeps coming when i try mining profitcoin 1st graph( the cpu ! kh/s ) and now i switch pool to another pool for bitcoin for the 2nd graph frm cmd giving kh but thats it no shares showing...

At the moment i get something like this
Starting stratum on stratum+tcp ~~
1miner thread started, using 'x11' algorithm.
Stratum difficulty set to 20
66.55.92.73:8000 x11 block 508972
GPU #0 GeForce GTX 670, 2216kH/s

And thats it.. it just shows the block and gpu again n again no news about shares or anythin sum1 in the know pls tellme what i am doing wrong...or if i am doing sumthing right