Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 299. (Read 2347601 times)
Regarding the "skunk", what is current time to mine 1 block using 5 or 6 x 1070?
is the speed confirmed on pool side?
I need to buy a 1080ti and put it in my testrig to get 60 MHASH ++
Yes, you really should. Your optimizing for nvidia, but don't have a 1080 Ti
*Update* 70% - 47 MH/s (-i 25.5)
Skunk Mod - 7 x 1080 Ti FE (1400watts)
70% 46 MH/s
100% 50 MH/s
I have to run my cards at 70% due to my 1500 watt PSU limit.
Plus it doesn't really make sense to run any algo at 100%, the last 30% it adds 800 watts.
I think there might still be improvements for the Skunk mod.
GPU power usage fluctuates between 49-70% rather than a constant 70%.
70% 46 MH/s
100% 50 MH/s
I have to run my cards at 70% due to my 1500 watt PSU limit.
Plus it doesn't really make sense to run any algo at 100%, the last 30% it adds 800 watts.
I think there might still be improvements for the Skunk mod.
GPU power usage fluctuates between 49-70% rather than a constant 70%.
I need to buy a 1080ti and put it in my testrig to get 60 MHASH ++
Skunk Mod - 7 x 1080 Ti FE (1400watts)
http://imgur.com/a/d1eum
70% 46 MH/s
100% 50 MH/s
I have to run my cards at 70% due to my 1500 watt PSU limit.
Plus it doesn't really make sense to run any algo at 100%, the last 30% it adds 800 watts.
I think there might still be improvements for the Skunk mod.
GPU power usage fluctuates between 49-70% rather than a constant 70%.
http://imgur.com/a/d1eum
70% 46 MH/s
100% 50 MH/s
I have to run my cards at 70% due to my 1500 watt PSU limit.
Plus it doesn't really make sense to run any algo at 100%, the last 30% it adds 800 watts.
I think there might still be improvements for the Skunk mod.
GPU power usage fluctuates between 49-70% rather than a constant 70%.
51.5 mh with 25.6 intensity working fine. BUt i think owners of zotac amp extreme and kfa how can get 53 with higher clock voltages
Who can beat 51.5 MHASH?? Anyone?
Screenshots please. But -x 8 on the gtx 1060 3gb and -x 30 on the gtx 1070 might give a small boost.
Multiples of the SMM count is usually best.
thank you, I will check. Multiples of the SMM count is usually best.
I will send out skunk sp-mod #1 soon.
I think it can do 45MHASH on the gtx 1080ti. Would you like to find out?
Mine when the profit is high with my optimized kernel. (0.05btc)
I think it can do 45MHASH on the gtx 1080ti. Would you like to find out?
Mine when the profit is high with my optimized kernel. (0.05btc)
Hi SP , would like to try it , donated and sent you a PM , thank you !
Nice results!
That's a new world record for the skunk hash. Mind to take a screenshot?
So sad but 53 mh rigs crashed after 10 minutes That's a new world record for the skunk hash. Mind to take a screenshot?
51.5 mh with 25.6 intensity working fine. BUt i think owners of zotac amp extreme and kfa how can get 53 with higher clock voltages
How about the consumption on that speeds?
Nice results!
That's a new world record for the skunk hash. Mind to take a screenshot?
So sad but 53 mh rigs crashed after 10 minutes That's a new world record for the skunk hash. Mind to take a screenshot?
51.5 mh with 25.6 intensity working fine. BUt i think owners of zotac amp extreme and kfa how can get 53 with higher clock voltages
How about the consumption on that speeds?
Nice results!
That's a new world record for the skunk hash. Mind to take a screenshot?
So sad but 53 mh rigs crashed after 10 minutes That's a new world record for the skunk hash. Mind to take a screenshot?
51.5 mh with 25.6 intensity working fine. BUt i think owners of zotac amp extreme and kfa how can get 53 with higher clock voltages
SP, any recommendations for spreadminer options, or just run with defaults? I tried "-x", but hashrate was always worse than default run.
The default -x values are normally set to SMM count of the chip. So for the gtx 1060 3gb the default is 9, and on the gtx 1070 the default is 15.
But -x 8 on the gtx 1060 3gb and -x 30 on the gtx 1070 might give a small boost.
Multiples of the SMM count is usually best.
how do you change intesity for different gpu's on a mixed rig?
you use a comma between the numbers.
f.ex.
-i 23,25,25.25,22
will give the 4 gpu's the following intensities:
gpu 0: 23
gpu 1: 25
gpu 2: 25.25
gpu 3: 22
Thank you sir, i will do some fine tuning after work tonight. spmod working great on 1070's!
how do you change intesity for different gpu's on a mixed rig?
you use a comma between the numbers.
f.ex.
-i 23,25,25.25,22
will give the 4 gpu's the following intensities:
gpu 0: 23
gpu 1: 25
gpu 2: 25.25
gpu 3: 22
any idea why 1060 6gb 9gbs would only be getting 6.4 mh/s on sp skunk mod? that is just over half of what i am getting with 1050ti
looks like an intensity issue, dont have time to mess with it right now.
how do you change intesity for different gpu's on a mixed rig?
any idea why 1060 6gb 9gbs would only be getting 6.4 mh/s on sp skunk mod? that is just over half of what i am getting with 1050ti
Use driver 382.xx and -i 25 in the batfile.
any idea why 1060 6gb 9gbs would only be getting 6.4 mh/s on sp skunk mod? that is just over half of what i am getting with 1050ti
You can make a screenshot of AB with graphs?
Nice results!
That's a new world record for the skunk hash. Mind to take a screenshot?
That's a new world record for the skunk hash. Mind to take a screenshot?
50 mh stable with 100 tdp 1080ti SJS +90 core, -i 25
upd: reached 53mh with -i 25.5 gigabyte aorus extreme +60 core
upd: reached 53mh with -i 25.5 gigabyte aorus extreme +60 core
Jump to: