CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 33.

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: sp_ on August 08, 2018, 11:26:19 PM

Quote from: scryptr on August 08, 2018, 06:01:50 PM

The setting of "-i 23" was already in my batch file for X16R.

You should use the default intensities for more speed. The default intensity for the 1080ti is 24

THIS IS A CHANGE--

The last version assigned "-i 21" as default. I tried higher intensities, and anything greater than "-i 23 "resulted in failure. This time I started where I left off, and did not go further. Profitability is low, even if performance is high. I have better coins to mine.

As for use of "The Pill", it is harmless when not needed, and helps when needed. I game with it. --scryptr

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

after around 10 hours of mining

spmod-git opensource
5174 accepted
18.58 RVN

https://eu.ravenminer.com/?address=RCQqCp2Ne7DSKYCEAZwjXqjiuKGAC78Hzr

t-rex 0.5.7

https://eu.ravenminer.com/?address=RAZqaXtN1jhrnW2BV8vc4WkNv3YQBne5GN

4989 accepted
17.96220330 RVN

spmod-git +3.70% faster and 0%fee.

now I should swap the cards and run the test again for another 10 hours. but too lazy. Try yourself..

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: scryptr on August 08, 2018, 06:01:50 PM

The setting of "-i 23" was already in my batch file for X16R.

You should use the default intensities for more speed. The default intensity for the 1080ti is 24

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: Johnjay06 on August 08, 2018, 05:06:56 PM

Is there a secret to getting the open source one to work on x16s? I get result does not validate on cpu errors everywhere. Is this only for x16r?

X16S is broken, this is for x16r.

ironkid

newbie

Activity: 59

Merit: 0

It modifies you memory timings so it works for everything relevant to that like Monero or other memory intensive stuff.

bensam1231

legendary

Activity: 1764

Merit: 1024

Quote from: scryptr on August 08, 2018, 06:01:50 PM

Quote from: jugger1028 on August 08, 2018, 04:35:24 PM

Quote from: scryptr on August 08, 2018, 03:37:41 PM

SPMOD #6 RUNS SMOOTHLY ON MY 1080ti--

With a quick 15-minute trial, I got about 50 accepts, no errors, 100% accepts. I was running with "The Pill", a slight memory overclock, and intensity 23. I did not try to evaluate speed, but there were no red-lines or errors. There are some low-difficulty Raven clones out there to harvest...

--scryptr

You run the eth pill on X16R? I'd think overclocking with no pill would get you a better hash rate, no? Just because lots of the algos aren't memory intensive.

I DID NOT WANT TO CHANGE MY SETTINGS--

The test ran only about 15 minutes. The setting of "-i 23" was already in my batch file for X16R. The miner worked without errors for the brief test. --scryptr

Unless I'm mistaken the pill modification is just for Ethereum, why would you use it for other algos?

Also we're getting realllllly close to oblivion as far as profit goes.

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: jugger1028 on August 08, 2018, 04:35:24 PM

Quote from: scryptr on August 08, 2018, 03:37:41 PM

SPMOD #6 RUNS SMOOTHLY ON MY 1080ti--

With a quick 15-minute trial, I got about 50 accepts, no errors, 100% accepts. I was running with "The Pill", a slight memory overclock, and intensity 23. I did not try to evaluate speed, but there were no red-lines or errors. There are some low-difficulty Raven clones out there to harvest...

--scryptr

You run the eth pill on X16R? I'd think overclocking with no pill would get you a better hash rate, no? Just because lots of the algos aren't memory intensive.

I DID NOT WANT TO CHANGE MY SETTINGS--

The test ran only about 15 minutes. The setting of "-i 23" was already in my batch file for X16R. The miner worked without errors for the brief test. --scryptr

Johnjay06

newbie

Activity: 93

Merit: 0

Is there a secret to getting the open source one to work on x16s? I get result does not validate on cpu errors everywhere. Is this only for x16r?

jugger1028

jr. member

Activity: 213

Merit: 3

Quote from: scryptr on August 08, 2018, 03:37:41 PM

SPMOD #6 RUNS SMOOTHLY ON MY 1080ti--

With a quick 15-minute trial, I got about 50 accepts, no errors, 100% accepts. I was running with "The Pill", a slight memory overclock, and intensity 23. I did not try to evaluate speed, but there were no red-lines or errors. There are some low-difficulty Raven clones out there to harvest...

--scryptr

You run the eth pill on X16R? I'd think overclocking with no pill would get you a better hash rate, no? Just because lots of the algos aren't memory intensive.

scryptr

legendary

Activity: 1797

Merit: 1028

SPMOD #6 RUNS SMOOTHLY ON MY 1080ti--

With a quick 15-minute trial, I got about 50 accepts, no errors, 100% accepts. I was running with "The Pill", a slight memory overclock, and intensity 23. I did not try to evaluate speed, but there were no red-lines or errors. There are some low-difficulty Raven clones out there to harvest...

--scryptr

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

t-rex vs sp-mod after around 2000 accepted shares at diff 2.

t-rex rejected: 0.55%
sp-mod rejected: 2.5%

The spmod-git opensource is currently +8.4% faster than t-rex, but this can change with other sequence numbers.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Raven x16r/x16s Spmod-git #6

new build released. (sp-mod #6 git)

-faster X16R/X16S +10-15% ( Optimalizations to aes,echo and simd)

https://github.com/sp-hash/suprminer/releases

I get best speeds with 100% tdp and +100 coreclock and +700 on the memory clock.

edit:

spmod-git #6, 1800 accepted vs t-rex 0.5.7 1674 . Will take a new screenshot on 2000 accepted..

Johnjay06

newbie

Activity: 93

Merit: 0

Tried it, moved directly over from enemy on x16s. I get cannot validate on cpu every time

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

I will release some more speed in the x16r algo on my github tonight. + some bugfixes

here are some preresults:

ccminer sp-mod git vs T-Rex 0.5.7

2 identical cards (gtx 1070ti) started at the same time. on the same pool to 2 different adresses. with a fixed difficulty of 2 (-p d=2 in the password)

batfile 1:
ccminer -d 1 -p d=2 (pool data)

batfile2:
t-rex -d 2 -p d=2 (pool data)

1000 accepts

T-rex has fewer rejected shares, but the speed is almost the same.

My mod is free and opensource.. 0% fee

zijieli

member

Activity: 91

Merit: 10

Quote from: sp_ on July 16, 2018, 05:20:19 PM

spread #15 has already been released. spread 1-9 (maxwell) spread 10-15 pascal

I did not receive the latest version of Spreadminer 14 sp-mod
I donated this version

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

I submitted a 30% speedup in the echo algo @github. (X16R 4-5% faster)

garytheasshole

full member

Activity: 406

Merit: 105

Chosŏn Minjujuŭi Inmin Konghwaguk

Quote from: sp_ on August 05, 2018, 07:55:47 AM

X16R/X16S sp-mod #5 Opensource has been released.

This miner is free, opensource and 0 fee.

-faster X16R/X16S +10% ( Optimalizations to echo, shabal, simd,sha512,fugue,shavite,groestl,skein)
-added support for higher intensity values

Cuda 9.2 build. Latest driver recommended

https://github.com/sp-hash/suprminer/releases/tag/spmod-git5

Careful not to break your arm jerking yourself off, about time you gave something back to open source.

bensam1231

legendary

Activity: 1764

Merit: 1024

Quote from: antantti on August 04, 2018, 06:49:04 PM

Quote from: jugger1028 on August 04, 2018, 05:47:40 PM

Every coin is shit to mine now anyway..

BTW, there actually is https://shittomine.com/ nowadays.

We are not there yet, this mining shit needs to dive more.

Not sure what to make of that website, it's just a bunch of coins... You can find that on coinmarketcap or whattomine.

Quote from: jugger1028 on August 04, 2018, 05:47:40 PM

Could be more FPGA's coming on line.. Every coin is shit to mine now anyway..

Even the niche coins are completely violated that definitely don't have ASICs. Miners aren't always the smartest bunch, but when we're approaching 4 year ROI on an extremely risky investment I don't know what to say to that. Pretty sure hash is still increasing quit fast even though profits are suuuuper down. This is one of the lowest points we've been at in years. This may continue into next year as well until the apprehension to BTC climbing goes away and people stop trying to manipulate it so much.

I've been in maintenance mode for the last eight months, it's getting kinda boring. Although income is basically a trickle now.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

X16R/X16S sp-mod #5 Opensource has been released.

This miner is free, opensource and 0 fee.

-faster X16R/X16S +10% ( Optimalizations to echo, shabal, simd,sha512,fugue,shavite,groestl,skein)
-added support for higher intensity values

Cuda 9.2 build. Latest driver recommended

https://github.com/sp-hash/suprminer/releases/tag/spmod-git5

paijo90

newbie

Activity: 61

Merit: 0

How nicely does the pc nevertheless feature whilst that is running? i exploit the everyday ccminer with no troubles to those who use the computer systems and it receives approximately 2500 kh/s on a 750ti.

I recognize that pc characteristic of the miner would not count to loads of oldsters and commonly no longer to me both however there are some that I favor to still have usable computers. tia

Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 33. (Read 2347633 times)