confirmation takes 288 rounds, which is about 14,4 hours
so it's a pure luck if coin get some pump or dump in that 14 hours
just now it's a bit more profitable than eth
Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 380. (Read 2347659 times)
rx470 rig gives about 8-9 mh/s, rx480 9-10, solo is working btw
How it is possible?! I have rig with 6 x RX480 and I have 5.7 Mh/s .
Where did you get the sgminer nicehash xevan build?
I wrote it - sold it to the devs for 0.1 BTC.
Damn, good performance. Would my RX480 with your miner gave so much (1.5 Mh / s)? Now I have 0.97 Mh / s per RX480 with 1200 MHz for GPU?
Perf isn't great; it could be better, but the algo is fuckin' huge.
btw, block reward for mining is only5, not 25, as amph said, he don't know what is saying as usual...
rx470 rig gives about 8-9 mh/s, rx480 9-10, solo is working btw
How it is possible?! I have rig with 6 x RX480 and I have 5.7 Mh/s .Where did you get the sgminer nicehash xevan build?
I wrote it - sold it to the devs for 0.1 BTC.
Damn, good performance. Would my RX480 with your miner gave so much (1.5 Mh / s)? Now I have 0.97 Mh / s per RX480 with 1200 MHz for GPU?
Perf isn't great; it could be better, but the algo is fuckin' huge.
btw, block reward for mining is only5, not 25, as amph said, he don't know what is saying as usual...
Perf isn't great; it could be better, but the algo is fuckin' huge.
Sure. Upper picture is 3xRX480 and 2xRX470. All of them underclocked and undervolted.
rx470 rig gives about 8-9 mh/s, rx480 9-10, solo is working btw
How it is possible?! I have rig with 6 x RX480 and I have 5.7 Mh/s .Where did you get the sgminer nicehash xevan build?
I wrote it - sold it to the devs for 0.1 BTC.
Damn, good performance. Would my RX480 with your miner gave so much (1.5 Mh / s)? Now I have 0.97 Mh / s per RX480 with 1200 MHz for GPU?
Perf isn't great; it could be better, but the algo is fuckin' huge.
rx470 rig gives about 8-9 mh/s, rx480 9-10, solo is working btw
How it is possible?! I have rig with 6 x RX480 and I have 5.7 Mh/s .Where did you get the sgminer nicehash xevan build?
I wrote it - sold it to the devs for 0.1 BTC.
Damn, good performance. Would my RX480 with your miner gave so much (1.5 Mh / s)? Now I have 0.97 Mh / s per RX480 with 1200 MHz for GPU?
rx470 rig gives about 8-9 mh/s, rx480 9-10, solo is working btw
How it is possible?! I have rig with 6 x RX480 and I have 5.7 Mh/s .Where did you get the sgminer nicehash xevan build?
rx470 rig gives about 8-9 mh/s, rx480 9-10, solo is working btw
How it is possible?! I have rig with 6 x RX480 and I have 5.7 Mh/s .Where did you get the sgminer nicehash xevan build?
rx470 rig gives about 8-9 mh/s, rx480 9-10, solo is working btw
How it is possible?! I have rig with 6 x RX480 and I have 5.7 Mh/s .
Got there easy. It's not much more profitable to benefit more time tinkering with. So maybe higher speeds are possible with different clocks/drivers.
Hello all! I need some expert advice...
I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.
(using kill a watt to measure)
I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.
(using kill a watt to measure)
Do you have a card wich use alot of power. With more than 1 8pin power adapter?
The lbry mod is not compiled with compute 61, so the driver will compile a new kernel runtime. You can try to install an earlier driver like 376.xx. There are some reports that the latest driver is not so good for mining. Another thing you could try is to reduce the intensity. Run with -i 23 or -i 24 or less
All four 1070 have 1 8pin power connector. I try reduze intensiva to 23 and 24... it keeps pulling 850-860w.
I'll try earlier nvidia drivers, but I started to think that the "Kill a Watt" could be defective...
Well... some people in this thread claims less than 900W with 6 1070 mining LBC
You're thinking of Equihash.
@luciano, if you're talking about bts, play with intensity and gpu eth-like settings
@sd_, 378.49 & ccminer-alexis
@sd_, 378.49 & ccminer-alexis
rx470 rig gives about 8-9 mh/s, rx480 9-10, solo is working btw
How it is possible?! I have rig with 6 x RX480 and I have 5.7 Mh/s .
latest driver and LBRY sp-mod #5?
i got 300-310 mh/s lbc with 155wt (nvidiainspector or nv-smi data), so 920 watt total of 6x1070 rig
further downvoltage is possible, <900 watt is not a dream
further downvoltage is possible, <900 watt is not a dream
Hello all! I need some expert advice...
I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.
(using kill a watt to measure)
I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.
(using kill a watt to measure)
Do you have a card wich use alot of power. With more than 1 8pin power adapter?
The lbry mod is not compiled with compute 61, so the driver will compile a new kernel runtime. You can try to install an earlier driver like 376.xx. There are some reports that the latest driver is not so good for mining. Another thing you could try is to reduce the intensity. Run with -i 23 or -i 24 or less
All four 1070 have 1 8pin power connector. I try reduze intensiva to 23 and 24... it keeps pulling 850-860w.
I'll try earlier nvidia drivers, but I started to think that the "Kill a Watt" could be defective...
Well... some people in this thread claims less than 900W with 6 1070 mining LBC
rx470 rig gives about 8-9 mh/s, rx480 9-10, solo is working btw
nethash is 50 mega now, amd gpu are mining and dumping...
if a rig can do 20 mg(3.x x 6) they are earning like 0.24 a day, that is insane
No, Rx4X0 rig can only do less than 10 MH/s. And solo is not working. At least for me.
unfortunately not, i don't invest in asic coin even less in pure pos, still dreaming about the pump on lbry...
Same, but it wasn't an ASIC coin and it's not pure PoS. It started with 6 months of Quark PoW phase when there were no known Quark ASICs and switched to PoS 6 months later last year August. Isn't the Baikal ASICs were shipped sometime around September?
The last PoW block had a difficulty of 48.5 so it's safe to say that no ASICs were mining it during its PoW period.
Anyway, I'm just glad I didn't sell.
The LBRY pump has to come eventually...
Hello all! I need some expert advice...
I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.
(using kill a watt to measure)
I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.
(using kill a watt to measure)
Do you have a card wich use alot of power. With more than 1 8pin power adapter?
The lbry mod is not compiled with compute 61, so the driver will compile a new kernel runtime. You can try to install an earlier driver like 376.xx. There are some reports that the latest driver is not so good for mining. Another thing you could try is to reduce the intensity. Run with -i 23 or -i 24 or less
All four 1070 have 1 8pin power connector. I try reduze intensiva to 23 and 24... it keeps pulling 850-860w.
I'll try earlier nvidia drivers, but I started to think that the "Kill a Watt" could be defective...
What nvidia-smi is saying ? check the power usage with it.
unfortunately not, i don't invest in asic coin even less in pure pos, still dreaming about the pump on lbry...
Jump to: