For some of you who might still hold some PIVX (DNET) or have masternodes running, it reached $1 per coin.
A week ago it was $0.14 per coin and a month ago it was $0.03.
Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 381. (Read 2347659 times)
Hello all! I need some expert advice...
I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.
(using kill a watt to measure)
I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.
(using kill a watt to measure)
Do you have a card wich use alot of power. With more than 1 8pin power adapter?
The lbry mod is not compiled with compute 61, so the driver will compile a new kernel runtime. You can try to install an earlier driver like 376.xx. There are some reports that the latest driver is not so good for mining. Another thing you could try is to reduce the intensity. Run with -i 23 or -i 24 or less
All four 1070 have 1 8pin power connector. I try reduze intensiva to 23 and 24... it keeps pulling 850-860w.
I'll try earlier nvidia drivers, but I started to think that the "Kill a Watt" could be defective...
Hello all! I need some expert advice...
I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.
(using kill a watt to measure)
I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.
(using kill a watt to measure)
Do you have a card wich use alot of power. With more than 1 8pin power adapter?
The lbry mod is not compiled with compute 61, so the driver will compile a new kernel runtime. You can try to install an earlier driver like 376.xx. There are some reports that the latest driver is not so good for mining. Another thing you could try is to reduce the intensity. Run with -i 23 or -i 24 or less
All four 1070 have 1 8pin power connector. I try reduze intensiva to 23 and 24... it keeps pulling 850-860w.
I'll try earlier nvidia drivers, but I started to think that the "Kill a Watt" could be defective...
sp_ ,are you planning to create equihash mod?
I have already made one. Not for the public. I run it on some of my rigs.Regards
I get 275 on the gtx 1060 3gb with low power..
so no bitsend mod sp? i'm waiting for it the diff look still affordable
Tonight..
nethash is 50 mega now, amd gpu are mining and dumping...
if a rig can do 20 mg(3.x x 6) they are earning like 0.24 a day, that is insane
so no bitsend mod sp? i'm waiting for it the diff look still affordable
Tonight..
so no bitsend mod sp? i'm waiting for it the diff look still affordable
sp_ ,are you planning to create equihash mod?
I have already made one. Not for the public. I run it on some of my rigs.
Regards
sp_ ,are you planning to create equihash mod?
I have already made one. Not for the public. I run it on some of my rigs.
sp_ ,are you planning to create equihash mod?
Hello all! I need some expert advice...
I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.
(using kill a watt to measure)
I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.
(using kill a watt to measure)
Do you have a card wich use alot of power. With more than 1 8pin power adapter?
The lbry mod is not compiled with compute 61, so the driver will compile a new kernel runtime. You can try to install an earlier driver like 376.xx. There are some reports that the latest driver is not so good for mining. Another thing you could try is to reduce the intensity. Run with -i 23 or -i 24 or less
Hello all! I need some expert advice...
I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.
(using kill a watt to measure)
I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.
(using kill a watt to measure)
Spreadminer 10 Hangs the system..
Did you test the fixed_3 version?
Works good.
i see that some gpu is mining bitsend, the net increase by 2x in no time i doubt it's cpu
Dev is compiled AMD GPU miner, but for me does not work. Maybe for other miner works. Maybe DEV uses the correct version and us gave a version with an error. Here I describe the error: https://bitcointalk.org/index.php?topic=1370307.1260
Spreadminer 10 Hangs the system..
Did you test the fixed_3 version?
Works good.
Spreadminer 10 Hangs the system..
Did you test the fixed_3 version?
Spreadminer 10 Hangs the system..
i see that some gpu is mining bitsend, the net increase by 2x in no time i doubt it's cpu
@Sp - would you please send me the fixed Spreadminer 10. I am running the original one you sent which is a little buggy. Hopefully this stops the crashes. Thanks - pokeytex
Sendt. Is this build more stable?
Spreadcoin by itself is not attractive because of non delivery of promises. But there is a proposed "ecomony split" of 1 SPR to 1 HLM (Helium Coin) in the near future. HLM is very attractive as it will deliver what the community wanted all these while, Masternodes and Servicenodes and applications run on Servicenodes. SPR was 1.5k sat before the announcement. Mining SPR is betting that the economy split will happen.
Helium is developed by a former member of the DASH core development team... Could be interesting..
Movement in the Spreadcoin price after the news. (bittrex)
Jump to: