Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 443. (Read 2347659 times)
Need to add cpu verification...
On the nvidia cuda miner i get just Proof of work is higher than target payload can't find out why or what it means
Nothing I tried fixed it..:-(
Nothing I tried fixed it..:-(
I can confirm, every nonce 970 finds gives this 'proof of work is higher than target payload' error. Reported hashrate is 520MH/ gtx 970 but I have a feeling they are hashing air.
Looks like zec is about to take nosedive so another nvidia-coin would be very welcome.
edit: about pasc wallet, I had 4 connections after 20 hours, all servers. After port forward + reboot it now shows 59 clients and 3 servers.
edit2: if server count drops below 3 node status changes from running to discovering servers.
On the nvidia cuda miner i get just Proof of work is higher than target payload can't find out why or what it means
Nothing I tried fixed it..:-(
Nothing I tried fixed it..:-(
Sorry for delay yes the Version of KlausT works good. I found already one block within 2h of mining with the newer version.
also: are you sure its from nvidia cards? the mining proxy seems to generate invalid submissions on the current wallet (viewable via log)I think the proxy works if the minername is 8 characters long and the encryption is set to the default setting.
I get problems syncing my wallet. Says that my Ip is banned. Anyone?
Which ip you have? I can check in my wallet if I find a blocked one.
PM me if you like
But the biggest issue is - Discovering Servers..it makes me a bit think that there is problem and thatswhy we won't find much blocks.
Because when i found a block i was fully "Running" but now it switches very very often from running to discovering.
Sorry for delay yes the Version of KlausT works good. I found already one block within 2h of mining with the newer version.
also: are you sure its from nvidia cards? the mining proxy seems to generate invalid submissions on the current wallet (viewable via log)I think the proxy works if the minername is 8 characters long and the encryption is set to the default setting.
I get problems syncing my wallet. Says that my Ip is banned. Anyone?
I had wallet with 8 characters, wallet is default and not encrypted but still wallet log on each share from proxy is:
Sorry for delay yes the Version of KlausT works good. I found already one block within 2h of mining with the newer version.
also: are you sure its from nvidia cards? the mining proxy seems to generate invalid submissions on the current wallet (viewable via log)I think the proxy works if the minername is 8 characters long and the encryption is set to the default setting.
I get problems syncing my wallet. Says that my Ip is banned. Anyone?
One fuckyng pool for pascal ?
suprnova is on the way, today or tomorrow i think
Sorry for delay yes the Version of KlausT works good. I found already one block within 2h of mining with the newer version.
what hashrate you have?
Thanks amph , this post says dont work ocminer pool with nvidia miner ?
https://bitcointalksearch.org/topic/m.17632125
.
Sorry for delay yes the Version of KlausT works good. I found already one block within 2h of mining with the newer version.
also: are you sure its from nvidia cards? the mining proxy seems to generate invalid submissions on the current wallet (viewable via log)
One fuckyng pool for pascal ?
suprnova is on the way, today or tomorrow i think
Sorry for delay yes the Version of KlausT works good. I found already one block within 2h of mining with the newer version.
what hashrate you have?
One fuckyng pool for pascal ?
Edit: Using now different compiled verson of the CUDA Pascal miner and getting on GTx1080 around 1000MH/s on my Zotacs and 865MH/s on Asus Strix and 765MH on Zotac GTX1070 Mini.
Could you point me into the direction of that miner please?
im not sure if its the same version, but i tested klausT's version (from github) and my 1070s hash with ~700mh/s
I assume you're talking about cryptonight. We're talking about Pascalcoin.
Sp_, this single file is the miner (it compiles and runs alone):
https://github.com/Vorksholk/PascalCoin-CUDA/blob/master/kernel.cu
so this should be optimized.
can you fix the device acquisation? d0,1,2,3 is not working i need to run multiple instances
im not sure what the dictating resource is for PascalCoin Hashrates, can someone clarify?
Notes: multiple 7970/280X do 210-230MH/s each, and i got one 7870 from Sapphire which does 280MH/s, where does the extra hash come from?
on other algos like Equihash and Cryptnight the hashrates match (as in 7870<7970/280X), but here it seems different
Notes: multiple 7970/280X do 210-230MH/s each, and i got one 7870 from Sapphire which does 280MH/s, where does the extra hash come from?
on other algos like Equihash and Cryptnight the hashrates match (as in 7870<7970/280X), but here it seems different
Sorry for delay yes the Version of KlausT works good. I found already one block within 2h of mining with the newer version.
Edit: Using now different compiled verson of the CUDA Pascal miner and getting on GTx1080 around 1000MH/s on my Zotacs and 865MH/s on Asus Strix and 765MH on Zotac GTX1070 Mini.
Could you point me into the direction of that miner please?
im not sure if its the same version, but i tested klausT's version (from github) and my 1070s hash with ~700mh/s
I assume you're talking about cryptonight. We're talking about Pascalcoin.
Sp_, this single file is the miner (it compiles and runs alone):
https://github.com/Vorksholk/PascalCoin-CUDA/blob/master/kernel.cu
so this should be optimized.
Oh, how did I missed that...
Thanks!
i was talking about PascalCoin, not Cryptonight
Yeah, I realizeed now, my bad.
Edit: Using now different compiled verson of the CUDA Pascal miner and getting on GTx1080 around 1000MH/s on my Zotacs and 865MH/s on Asus Strix and 765MH on Zotac GTX1070 Mini.
Could you point me into the direction of that miner please?
im not sure if its the same version, but i tested klausT's version (from github) and my 1070s hash with ~700mh/s
I assume you're talking about cryptonight. We're talking about Pascalcoin.
Sp_, this single file is the miner (it compiles and runs alone):
https://github.com/Vorksholk/PascalCoin-CUDA/blob/master/kernel.cu
so this should be optimized.
Oh, how did I missed that...
Thanks!
i was talking about PascalCoin, not Cryptonight
Edit: Using now different compiled verson of the CUDA Pascal miner and getting on GTx1080 around 1000MH/s on my Zotacs and 865MH/s on Asus Strix and 765MH on Zotac GTX1070 Mini.
Could you point me into the direction of that miner please?
im not sure if its the same version, but i tested klausT's version (from github) and my 1070s hash with ~700mh/s
I assume you're talking about cryptonight. We're talking about Pascalcoin.
Sp_, this single file is the miner (it compiles and runs alone):
https://github.com/Vorksholk/PascalCoin-CUDA/blob/master/kernel.cu
so this should be optimized.
Oh, how did I missed that...
Thanks!
Edit: Using now different compiled verson of the CUDA Pascal miner and getting on GTx1080 around 1000MH/s on my Zotacs and 865MH/s on Asus Strix and 765MH on Zotac GTX1070 Mini.
Could you point me into the direction of that miner please?
im not sure if its the same version, but i tested klausT's version (from github) and my 1070s hash with ~700mh/s
I assume you're talking about cryptonight. We're talking about Pascalcoin.
Sp_, this single file is the miner (it compiles and runs alone):
https://github.com/Vorksholk/PascalCoin-CUDA/blob/master/kernel.cu
so this should be optimized.
Edit: Using now different compiled verson of the CUDA Pascal miner and getting on GTx1080 around 1000MH/s on my Zotacs and 865MH/s on Asus Strix and 765MH on Zotac GTX1070 Mini.
Could you point me into the direction of that miner please?
im not sure if its the same version, but i tested klausT's version (from github) and my 1070s hash with ~700mh/s
I assume you're talking about cryptonight. We're talking about Pascalcoin.
Sp_, this single file is the miner (it compiles and runs alone):
https://github.com/Vorksholk/PascalCoin-CUDA/blob/master/kernel.cu
so this should be optimized.
Edit: Using now different compiled verson of the CUDA Pascal miner and getting on GTx1080 around 1000MH/s on my Zotacs and 865MH/s on Asus Strix and 765MH on Zotac GTX1070 Mini.
Could you point me into the direction of that miner please?
im not sure if its the same version, but i tested klausT's version (from github) and my 1070s hash with ~700mh/s
also it would be super great if someone could rewrite the jar file to also accepted the params from argument list, it wont parse it in a batchfile and waits for stdin
Edit: Using now different compiled verson of the CUDA Pascal miner and getting on GTx1080 around 1000MH/s on my Zotacs and 865MH/s on Asus Strix and 765MH on Zotac GTX1070 Mini.
Could you point me into the direction of that miner please?
Jump to: