CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 997.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: djm34 on August 14, 2015, 12:37:08 PM

Quote from: UserAlter on August 14, 2015, 10:50:04 AM

It looks like mining ETH is currently the most profitable.
100 750Ti could get 1.15 BTC/day.

why are you all counting in 100 or 1000 of 750ti ?

You can pick up a faulty NVIDIA chip on the black market in asia cheap. Disable the cores that don't work, connect the asics to a grid... Voilà

The competition is working...

The professors are sleeping

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: pallas on August 14, 2015, 05:05:15 PM

Ccminer doesn't depend on qt.
Qt is a graphical widget library (and more) while ccminer is for the terminal.
But, many coin wallets have a GUI using qt.

Thank You!

I am not currently running any wallets on my Linux boxes. --scryptr

pallas

legendary

Activity: 2716

Merit: 1094

Black Belt Developer

Ccminer doesn't depend on qt.
Qt is a graphical widget library (and more) while ccminer is for the terminal.
But, many coin wallets have a GUI using qt.

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: antonio8 on August 14, 2015, 02:46:08 PM

@scryptr

You can open a second geth via cmd prompt and type: geth - - attach

This will let you use commands without affecting the: geth - - rpc

Just in case you have not used that. Also not sure how much help you are getting in the other thread.

NOT MUCH--

I mined solo for a while with both the wallet, and the GTX 960. I stopped the wallet CPU miner, and my GPU miner went from 10Mh/s to 10.5Mh/s. So, no real need to max out the CPU with 8 threads.

Supposedly, the level of "Verbosity" for Geth can be adjusted, there may be another way.

With ETH coin, the miner finds "Blocks" of 5 coins, or "Uncles" of 4.375 or 3.75 coins (Uncle 0 and Uncle 1).

At 10.5Mh/s, I should be able to receive about 10 coins a week. If I install the Ethereum packages on Ubuntu, I could mine on the Lan with my Linux boxes. If I rebuilt my AMD 280x rig, that would be about 6x 24Mh/s, or a total of 150Mh/s (6x280x + 1x960), or a lot of ETH coins.

If you install the ethereum packages, your "qt" gets upgraded to v5.5. Do you (or anyone else) know if that would affect the compilation of CCminer on Linux?

We'll see. --scryptr

frazier34567

member

Activity: 95

Merit: 10

Quote from: bensam1231 on August 14, 2015, 03:47:30 PM

Quote from: sp_ on August 14, 2015, 05:32:12 AM

Quote from: bensam1231 on August 14, 2015, 05:17:26 AM

Quote from: sp_ on August 14, 2015, 12:39:30 AM

The Yaamp clones also have a botfree renting service.
http://hashpower.co/renting
http://ffpool.net/renting
So if you discover a profitable coin, might give you some profit
Today, the old lyra algorithm is good to mine.
ffpool.net
lyra2 4433 2 13 17.4 mh/s 4% 3.1074* 2.0790 2.7733 BTCGHASH/DAy
You could rent hashpower at Nicehash for
Lyra2RE 3342 0.1396 BTCGHASH/Day

No fixed orders for Lyra... I would do it, but I'll be playing footsie with bots all night only to come away with blue balls.
Fuck Nicehash. It'd be great if there was a way you could flag your rigs on Nicehash to ONLY be available for fixed orders.

I managed to place a fixed order with some tricks Grin

I buy hashpower for 1.4BTC/GHASH ,and sell on the mulitpool for 2.6GMASH. I guess miners are lazy, or they forgot their rig ?

free lunch

[IMGhttp://i60.tinypic.com/2hedgfl.png[/img]http://[IMGhttp://i59.tinypic.com/yjvp0.png[/img]

Guessing there is some sort of bug in the UI that allows you to place fixed orders when none are available?

I would STRONGLY suggest you NOT mine on ffpool.net I still have not been paid for 3 days. Block in Quark and Scrypt are not maturing. No response from them on their pool thread.

https://bitcointalk.org/index.php?topic=1110632.140

bensam1231

legendary

Activity: 1764

Merit: 1024

Quote from: sp_ on August 14, 2015, 05:32:12 AM

Quote from: bensam1231 on August 14, 2015, 05:17:26 AM

Quote from: sp_ on August 14, 2015, 12:39:30 AM

The Yaamp clones also have a botfree renting service.
http://hashpower.co/renting
http://ffpool.net/renting
So if you discover a profitable coin, might give you some profit
Today, the old lyra algorithm is good to mine.
ffpool.net
lyra2 4433 2 13 17.4 mh/s 4% 3.1074* 2.0790 2.7733 BTCGHASH/DAy
You could rent hashpower at Nicehash for
Lyra2RE 3342 0.1396 BTCGHASH/Day

No fixed orders for Lyra... I would do it, but I'll be playing footsie with bots all night only to come away with blue balls.
Fuck Nicehash. It'd be great if there was a way you could flag your rigs on Nicehash to ONLY be available for fixed orders.

I managed to place a fixed order with some tricks Grin

I buy hashpower for 1.4BTC/GHASH ,and sell on the mulitpool for 2.6GMASH. I guess miners are lazy, or they forgot their rig ?

free lunch

Guessing there is some sort of bug in the UI that allows you to place fixed orders when none are available?

antonio8

legendary

Activity: 1400

Merit: 1000

@scryptr

You can open a second geth via cmd prompt and type: geth - - attach

This will let you use commands without affecting the: geth - - rpc

Just in case you have not used that. Also not sure how much help you are getting in the other thread.

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: joblo on August 14, 2015, 01:41:00 PM

Lyra2v2 on a 970 is underperforming a 780ti. In every other algo the 970 performs better.

On Nicehash, with --diff 2, hashrate confirmed on the pool, the 970 reaches 8750 while the 780ti
does 9300. Compared to other algos on the 970 I expect to get around 12000 for lyra2v2.

thanks for your words of wisdom but L.O.L. (and the 980 is doing 12MH/s and my 780ti 10MH/s)

the 780ti is outperforming the 970 not the inverse, more core/larger mem bandwidth
(and for info in prev version the 780ti was faster than the 980...)
actually the 780ti is still faster on lyra2 kernel but lose on pure calculation algo... and for info there aren't using the same
integers types and that's the reason the 780ti is fast, might be something to look at for further optimizing the 780ti on other algo)

edit: that doesn't mean there isn't room for optimization but not on that basis

jjjordan

sr. member

Activity: 271

Merit: 251

Quote from: UserAlter on August 14, 2015, 02:18:06 PM

Quote from: scryptr on August 14, 2015, 01:21:07 PM

Quote from: jjjordan on August 14, 2015, 12:08:54 PM

Quote from: UserAlter on August 14, 2015, 11:34:59 AM

Quote from: scryptr on August 14, 2015, 11:17:19 AM

Quote from: UserAlter on August 14, 2015, 11:05:39 AM

Quote from: dominuspro on August 14, 2015, 10:52:21 AM

I had also problems on verters, then switched to solo and then discovered give-me-coins.com(tnx to user phenomenha's tip) and it is just great Wink

You get what You deserve and you can calculate the profit aswell with the calculator on the page. You would earn 0.063 BTC/day with 96Mh and the current diff 302.63 Wink

You would get 0.25 BTC/day with that equivalent 96MH VTC hashrate for ETH.
I am not sure the exact profit as I am just starting to mine that hot baby.

GETH--

I just started Geth, the wallet, with the Windows batch file. How can a miner tell when the blockchain is completely in place? The wallet is console-only. I have been waiting about 18 hours, watching the text stream by. Do you have a clue?

--scryptr

check the latest block @ https://etherchain.org/blocks
It took two hours for me.
Then, type personal.newAccount("yourpassword") to create your account.

Has anybody figured out how to stop all this text from flowing in the console?
Like I start to type some commands and new blocks/whatever lines start showing up...
I also tried to delete an account (that I created with password "password") and the console says: "deleteAccount is not a function"
I was going per the instructions here: https://github.com/ethereum/go-ethereum/wiki/JavaScript-Console#personaldeleteaccount

NOW MINING ETH--

If I can get the steps straight in my head, I'll write a short tutorial. My GTX 960 on my Win7 x64 work computer is getting about 10Mh/s, and I am mining solo.

Apparently, if you start Geth with the "console" command only, like the batch file provided in the Cryptomining Blog package, it will stream by fairly verbose information. Every block found is scrolled across the screen. So, when I checked the blocks information page, my console was only 1 or 2 blocks ahead of the listed blocks on the web. I figured my blockchain was complete.

It took some fiddling, but I started solo-ming. We'll see if 10Mh/s is enough to generate a block. --scryptr

I am @ ethpool.
Nethash is 240 GH/s.

Ethpool is closed for new members now: "Due too the high hashrate the pool currently does not accept new miners!"
Mining solo with a 970 - 17-18Mh

UserAlter

sr. member

Activity: 365

Merit: 250

?

Quote from: scryptr on August 14, 2015, 01:21:07 PM

Quote from: jjjordan on August 14, 2015, 12:08:54 PM

Quote from: UserAlter on August 14, 2015, 11:34:59 AM

Quote from: scryptr on August 14, 2015, 11:17:19 AM

Quote from: UserAlter on August 14, 2015, 11:05:39 AM

Quote from: dominuspro on August 14, 2015, 10:52:21 AM

I had also problems on verters, then switched to solo and then discovered give-me-coins.com(tnx to user phenomenha's tip) and it is just great Wink

You get what You deserve and you can calculate the profit aswell with the calculator on the page. You would earn 0.063 BTC/day with 96Mh and the current diff 302.63 Wink

You would get 0.25 BTC/day with that equivalent 96MH VTC hashrate for ETH.
I am not sure the exact profit as I am just starting to mine that hot baby.

GETH--

I just started Geth, the wallet, with the Windows batch file. How can a miner tell when the blockchain is completely in place? The wallet is console-only. I have been waiting about 18 hours, watching the text stream by. Do you have a clue?

--scryptr

check the latest block @ https://etherchain.org/blocks
It took two hours for me.
Then, type personal.newAccount("yourpassword") to create your account.

Has anybody figured out how to stop all this text from flowing in the console?
Like I start to type some commands and new blocks/whatever lines start showing up...
I also tried to delete an account (that I created with password "password") and the console says: "deleteAccount is not a function"
I was going per the instructions here: https://github.com/ethereum/go-ethereum/wiki/JavaScript-Console#personaldeleteaccount

NOW MINING ETH--

If I can get the steps straight in my head, I'll write a short tutorial. My GTX 960 on my Win7 x64 work computer is getting about 10Mh/s, and I am mining solo.

Apparently, if you start Geth with the "console" command only, like the batch file provided in the Cryptomining Blog package, it will stream by fairly verbose information. Every block found is scrolled across the screen. So, when I checked the blocks information page, my console was only 1 or 2 blocks ahead of the listed blocks on the web. I figured my blockchain was complete.

It took some fiddling, but I started solo-ming. We'll see if 10Mh/s is enough to generate a block. --scryptr

I am @ ethpool.
Nethash is 240 GH/s.

joblo

legendary

Activity: 1470

Merit: 1114

Lyra2v2 on a 970 is underperforming a 780ti. In every other algo the 970 performs better.

On Nicehash, with --diff 2, hashrate confirmed on the pool, the 970 reaches 8750 while the 780ti
does 9300. Compared to other algos on the 970 I expect to get around 12000 for lyra2v2.

It looks like there may be opportunities for optimization.

Edit: Both cards were stock and default intensity in ccminer. I didn't try to adjust intensity
because the deficit seemed too big to make up with higher intensity.

Edit2: The 970 runs much cooler than usual on lyra2v2 even though the GPU utilization is 99%.
Memory usage is only 37%. The 780ti runs at its usual temperature with identical GPU and mem
usage.

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: jjjordan on August 14, 2015, 12:08:54 PM

Quote from: UserAlter on August 14, 2015, 11:34:59 AM

Quote from: scryptr on August 14, 2015, 11:17:19 AM

Quote from: UserAlter on August 14, 2015, 11:05:39 AM

Quote from: dominuspro on August 14, 2015, 10:52:21 AM

I had also problems on verters, then switched to solo and then discovered give-me-coins.com(tnx to user phenomenha's tip) and it is just great Wink

You get what You deserve and you can calculate the profit aswell with the calculator on the page. You would earn 0.063 BTC/day with 96Mh and the current diff 302.63 Wink

You would get 0.25 BTC/day with that equivalent 96MH VTC hashrate for ETH.
I am not sure the exact profit as I am just starting to mine that hot baby.

GETH--

I just started Geth, the wallet, with the Windows batch file. How can a miner tell when the blockchain is completely in place? The wallet is console-only. I have been waiting about 18 hours, watching the text stream by. Do you have a clue?

--scryptr

check the latest block @ https://etherchain.org/blocks
It took two hours for me.
Then, type personal.newAccount("yourpassword") to create your account.

Has anybody figured out how to stop all this text from flowing in the console?
Like I start to type some commands and new blocks/whatever lines start showing up...
I also tried to delete an account (that I created with password "password") and the console says: "deleteAccount is not a function"
I was going per the instructions here: https://github.com/ethereum/go-ethereum/wiki/JavaScript-Console#personaldeleteaccount

NOW MINING ETH--

If I can get the steps straight in my head, I'll write a short tutorial. My GTX 960 on my Win7 x64 work computer is getting about 10Mh/s, and I am mining solo.

Apparently, if you start Geth with the "console" command only, like the batch file provided in the Cryptomining Blog package, it will stream by fairly verbose information. Every block found is scrolled across the screen. So, when I checked the blocks information page, my console was only 1 or 2 blocks ahead of the listed blocks on the web. I figured my blockchain was complete.

It took some fiddling, but I started solo-ming. We'll see if 10Mh/s is enough to generate a block. --scryptr

UserAlter

sr. member

Activity: 365

Merit: 250

?

Quote from: djm34 on August 14, 2015, 12:37:08 PM

Quote from: UserAlter on August 14, 2015, 10:50:04 AM

It looks like mining ETH is currently the most profitable.
100 750Ti could get 1.15 BTC/day.

why are you all counting in 100 or 1000 of 750ti ?

I just use the hashrates of top 10 ETH miners. http://ethpool.org/
edit: I am testing with my poor 6 cards rig. Angry

dominuspro

full member

Activity: 201

Merit: 100

Quote from: djm34 on August 14, 2015, 12:37:08 PM

why are you all counting in 100 or 1000 of 750ti ?

Because it only needs 120000EUR to buy 1000 of them + a little powerplant and You are making big money Cheesy

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: UserAlter on August 14, 2015, 10:50:04 AM

It looks like mining ETH is currently the most profitable.
100 750Ti could get 1.15 BTC/day.

why are you all counting in 100 or 1000 of 750ti ?

antonio8

legendary

Activity: 1400

Merit: 1000

Quote from: jjjordan on August 14, 2015, 12:23:09 PM

Quote from: antonio8 on August 14, 2015, 12:12:11 PM

Quote from: scryptr on August 14, 2015, 11:17:19 AM

Quote from: UserAlter on August 14, 2015, 11:05:39 AM

Quote from: dominuspro on August 14, 2015, 10:52:21 AM

I had also problems on verters, then switched to solo and then discovered give-me-coins.com(tnx to user phenomenha's tip) and it is just great Wink

You get what You deserve and you can calculate the profit aswell with the calculator on the page. You would earn 0.063 BTC/day with 96Mh and the current diff 302.63 Wink

You would get 0.25 BTC/day with that equivalent 96MH VTC hashrate for ETH.
I am not sure the exact profit as I am just starting to mine that hot baby.

GETH--

I just started Geth, the wallet, with the Windows batch file. How can a miner tell when the blockchain is completely in place? The wallet is console-only. I have been waiting about 18 hours, watching the text stream by. Do you have a clue?

--scryptr

If you did the genesis_block.json then it should take less than 20 minutes. 10 actually.

How do we do that? What is that? Any chance you've seen step-by-step instructions somewhere?

Thanks

I do but I am at work and on my phone. Will be home in about 7 hours.

Just a heads up if you have 750ti's then this coin is not worth it with the current available miners. Believe me, I have tried. 960's and above then you are fine.

Also don't expect much help from the Ether forum or irc. They are keeping this as low key as possible.

EDIT: 1 750ti does good mixed with 960 and above but not straight 750ti's

jjjordan

sr. member

Activity: 271

Merit: 251

Quote from: antonio8 on August 14, 2015, 12:12:11 PM

Quote from: scryptr on August 14, 2015, 11:17:19 AM

Quote from: UserAlter on August 14, 2015, 11:05:39 AM

Quote from: dominuspro on August 14, 2015, 10:52:21 AM

I had also problems on verters, then switched to solo and then discovered give-me-coins.com(tnx to user phenomenha's tip) and it is just great Wink

You get what You deserve and you can calculate the profit aswell with the calculator on the page. You would earn 0.063 BTC/day with 96Mh and the current diff 302.63 Wink

You would get 0.25 BTC/day with that equivalent 96MH VTC hashrate for ETH.
I am not sure the exact profit as I am just starting to mine that hot baby.

GETH--

I just started Geth, the wallet, with the Windows batch file. How can a miner tell when the blockchain is completely in place? The wallet is console-only. I have been waiting about 18 hours, watching the text stream by. Do you have a clue?

--scryptr

If you did the genesis_block.json then it should take less than 20 minutes. 10 actually.

How do we do that? What is that? Any chance you've seen step-by-step instructions somewhere?

Thanks

antonio8

legendary

Activity: 1400

Merit: 1000

Quote from: scryptr on August 14, 2015, 11:17:19 AM

Quote from: UserAlter on August 14, 2015, 11:05:39 AM

Quote from: dominuspro on August 14, 2015, 10:52:21 AM

I had also problems on verters, then switched to solo and then discovered give-me-coins.com(tnx to user phenomenha's tip) and it is just great Wink

You get what You deserve and you can calculate the profit aswell with the calculator on the page. You would earn 0.063 BTC/day with 96Mh and the current diff 302.63 Wink

You would get 0.25 BTC/day with that equivalent 96MH VTC hashrate for ETH.
I am not sure the exact profit as I am just starting to mine that hot baby.

GETH--

I just started Geth, the wallet, with the Windows batch file. How can a miner tell when the blockchain is completely in place? The wallet is console-only. I have been waiting about 18 hours, watching the text stream by. Do you have a clue?

--scryptr

If you did the genesis_block.json then it should take less than 20 minutes. 10 actually.

jjjordan

sr. member

Activity: 271

Merit: 251

Quote from: UserAlter on August 14, 2015, 11:34:59 AM

Quote from: scryptr on August 14, 2015, 11:17:19 AM

Quote from: UserAlter on August 14, 2015, 11:05:39 AM

Quote from: dominuspro on August 14, 2015, 10:52:21 AM

I had also problems on verters, then switched to solo and then discovered give-me-coins.com(tnx to user phenomenha's tip) and it is just great Wink

You get what You deserve and you can calculate the profit aswell with the calculator on the page. You would earn 0.063 BTC/day with 96Mh and the current diff 302.63 Wink

You would get 0.25 BTC/day with that equivalent 96MH VTC hashrate for ETH.
I am not sure the exact profit as I am just starting to mine that hot baby.

GETH--

I just started Geth, the wallet, with the Windows batch file. How can a miner tell when the blockchain is completely in place? The wallet is console-only. I have been waiting about 18 hours, watching the text stream by. Do you have a clue?

--scryptr

check the latest block @ https://etherchain.org/blocks
It took two hours for me.
Then, type personal.newAccount("yourpassword") to create your account.

Has anybody figured out how to stop all this text from flowing in the console?
Like I start to type some commands and new blocks/whatever lines start showing up...
I also tried to delete an account (that I created with password "password") and the console says: "deleteAccount is not a function"
I was going per the instructions here: https://github.com/ethereum/go-ethereum/wiki/JavaScript-Console#personaldeleteaccount

UserAlter

sr. member

Activity: 365

Merit: 250

?

Quote from: scryptr on August 14, 2015, 11:17:19 AM

Quote from: UserAlter on August 14, 2015, 11:05:39 AM

Quote from: dominuspro on August 14, 2015, 10:52:21 AM

I had also problems on verters, then switched to solo and then discovered give-me-coins.com(tnx to user phenomenha's tip) and it is just great Wink

You get what You deserve and you can calculate the profit aswell with the calculator on the page. You would earn 0.063 BTC/day with 96Mh and the current diff 302.63 Wink

You would get 0.25 BTC/day with that equivalent 96MH VTC hashrate for ETH.
I am not sure the exact profit as I am just starting to mine that hot baby.

GETH--

I just started Geth, the wallet, with the Windows batch file. How can a miner tell when the blockchain is completely in place? The wallet is console-only. I have been waiting about 18 hours, watching the text stream by. Do you have a clue?

--scryptr

check the latest block @ https://etherchain.org/blocks
It took two hours for me.
Then, type personal.newAccount("yourpassword") to create your account.

Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 997. (Read 2347601 times)