Claymore's CryptoNote AMD GPU Miner v11.3 - page 246.

nrg_wolf

legendary

Activity: 882

Merit: 1000

Quote from: wanttalk on July 31, 2014, 09:59:46 PM

Hi, claymore, i have a lot of 6850 and 6870 cards.
the hashrate is too low.
6X6850 : overclock to 850, got 960 h/s
6X6870 : not overclock, got 1020 h/s
is this the good h/s?
help. thank you.

they sound like 1gb cards. if its one gb cards then you wont get much better then that.

wanttalk

newbie

Activity: 1

Merit: 0

Hi, claymore, i have a lot of 6850 and 6870 cards.
the hashrate is too low.
6X6850 : overclock to 850, got 960 h/s
6X6870 : not overclock, got 1020 h/s
is this the good h/s?
help. thank you.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: Crypto_EX on July 30, 2014, 11:18:45 AM

why do i keep seeing devfee : found share like all the time it's like the miner is mining for him rather than me i see dev fee found share more than i see found share without the "dev fee :"

somebody wants to explain

7 pages ago:
https://bitcointalksearch.org/topic/m.7907911

Crypto_EX

member

Activity: 70

Merit: 10

why do i keep seeing devfee : found share like all the time it's like the miner is mining for him rather than me i see dev fee found share more than i see found share without the "dev fee :"

somebody wants to explain

BitRock

full member

Activity: 137

Merit: 100

Quote from: Tiger78 on July 30, 2014, 11:11:29 AM

Please give a link to
Claymore CryptoNote GPU Miner v4

https://mega.co.nz/#F!e4JVEAIJ!l1iF4z10fMyJzY5-LnyC2A

Tiger78

member

Activity: 83

Merit: 10

Please give a link to
Claymore CryptoNote GPU Miner v4

wpalczynski

legendary

Activity: 1456

Merit: 1000

Got it. Thanks.

Quote from: Eastwind on July 30, 2014, 10:25:34 AM

Quote from: wpalczynski on July 30, 2014, 09:16:36 AM

Is there a parameter in the miner with which I could increase the fan speed? Cards are running at 93-94 celsius.

No. You have to use software such as MSI afterburner.

Eastwind

hero member

Activity: 896

Merit: 1000

Quote from: wpalczynski on July 30, 2014, 09:16:36 AM

Is there a parameter in the miner with which I could increase the fan speed? Cards are running at 93-94 celsius.

No. You have to use software such as MSI afterburner.

wpalczynski

legendary

Activity: 1456

Merit: 1000

Is there a parameter in the miner with which I could increase the fan speed? Cards are running at 93-94 celsius.

Quote from: wpalczynski on July 30, 2014, 08:05:44 AM

Thank you.

Quote from: Eastwind on July 30, 2014, 07:48:56 AM

Quote from: wpalczynski on July 30, 2014, 07:10:55 AM

How can I determine what memory I have? I still have the boxes would it say on them?

You can use GPUz.

wpalczynski

legendary

Activity: 1456

Merit: 1000

Thank you.

Quote from: Eastwind on July 30, 2014, 07:48:56 AM

Quote from: wpalczynski on July 30, 2014, 07:10:55 AM

How can I determine what memory I have? I still have the boxes would it say on them?

You can use GPUz.

Eastwind

hero member

Activity: 896

Merit: 1000

Quote from: wpalczynski on July 30, 2014, 07:10:55 AM

How can I determine what memory I have? I still have the boxes would it say on them?

You can use GPUz.

wpalczynski

legendary

Activity: 1456

Merit: 1000

How can I determine what memory I have? I still have the boxes would it say on them?

Quote from: DES_MX on July 30, 2014, 03:48:22 AM

Quote from: wpalczynski on July 30, 2014, 12:51:59 AM

Windows 8.1, 32GB Ram, 2x r9 290 and Im getting about 1200h combined rate in the Claymore console. Is that normal for r9 290s? Are there any switches or parameters I could pass when starting the program to increase hash rate?

If Elpida memory then yes it's okay hash
If Hynix then overclock to 1075/1500 and bump voltage very slightly (.025v)
You should get 750h+ per card.. So count on 1.5khash total
Also use 4.0 miner! Newer versions report higher hash in console but significantly lower "real" hash on pool.
On dwarfpool I see 15-20% difference!

HashInvest

full member

Activity: 143

Merit: 100

Pools: XMR.HashInvest.net

Join Monero Pool http://hashinvest.net / EU / Low 1.5% fees

Update: Added payouts log for transparency

XMR mining Getting Started for Linux, Windows and Mac users.
I take care of this pool all the time. Stable pool with instant online support.

Enable desktop notifications and always stay in tune!

Instant support

HashInvest won't speculate on volatile luck and hardware.
Just stable, well-maintained pool, kind support will help your even at night.

DES_MX

member

Activity: 216

Merit: 13

Quote from: wpalczynski on July 30, 2014, 12:51:59 AM

Windows 8.1, 32GB Ram, 2x r9 290 and Im getting about 1200h combined rate in the Claymore console. Is that normal for r9 290s? Are there any switches or parameters I could pass when starting the program to increase hash rate?

If Elpida memory then yes it's okay hash
If Hynix then overclock to 1075/1500 and bump voltage very slightly (.025v)
You should get 750h+ per card.. So count on 1.5khash total
Also use 4.0 miner! Newer versions report higher hash in console but significantly lower "real" hash on pool.
On dwarfpool I see 15-20% difference!

wpalczynski

legendary

Activity: 1456

Merit: 1000

Windows 8.1, 32GB Ram, 2x r9 290 and Im getting about 1200h combined rate in the Claymore console. Is that normal for r9 290s? Are there any switches or parameters I could pass when starting the program to increase hash rate?

Crypto_EX

member

Activity: 70

Merit: 10

Quote from: demios on July 29, 2014, 06:37:33 PM

Quote from: Crypto_EX on July 29, 2014, 06:17:46 PM

Quote from: CiscoStud on July 29, 2014, 04:03:35 PM

Quote from: demios on July 27, 2014, 06:12:26 PM

people, 6.1 miner sucks.
it shows a couple % more hash in miner itself, but pool says 20-30% less, and you get 20-30% less xmr in your wallet.

also, clay added two more dev fee adresses for you guys that are using older minerproxys.

4.0 miner + minerproxy works the best.

5% is just too much.

Yup, I totally agree! I was getting robbed using 6.1. Going back to 4.0 brought up my hash at both pools I use. **6.1 is a piece of shit**

does 4.0 work for older 6900 , 5800 series GPUs ?!

and yes 5% is too high , period

don't now that.
you can use newer versions of miner that works, and also use the newest version of minerproxy.

what does miner proxy do ?

demios

newbie

Activity: 7

Merit: 0

Quote from: Crypto_EX on July 29, 2014, 06:17:46 PM

Quote from: CiscoStud on July 29, 2014, 04:03:35 PM

Quote from: demios on July 27, 2014, 06:12:26 PM

people, 6.1 miner sucks.
it shows a couple % more hash in miner itself, but pool says 20-30% less, and you get 20-30% less xmr in your wallet.

also, clay added two more dev fee adresses for you guys that are using older minerproxys.

4.0 miner + minerproxy works the best.

5% is just too much.

Yup, I totally agree! I was getting robbed using 6.1. Going back to 4.0 brought up my hash at both pools I use. **6.1 is a piece of shit**

does 4.0 work for older 6900 , 5800 series GPUs ?!

and yes 5% is too high , period

don't now that.
you can use newer versions of miner that works, and also use the newest version of minerproxy.

Crypto_EX

member

Activity: 70

Merit: 10

Quote from: CiscoStud on July 29, 2014, 04:03:35 PM

Quote from: demios on July 27, 2014, 06:12:26 PM

people, 6.1 miner sucks.
it shows a couple % more hash in miner itself, but pool says 20-30% less, and you get 20-30% less xmr in your wallet.

also, clay added two more dev fee adresses for you guys that are using older minerproxys.

4.0 miner + minerproxy works the best.

5% is just too much.

Yup, I totally agree! I was getting robbed using 6.1. Going back to 4.0 brought up my hash at both pools I use. **6.1 is a piece of shit**

does 4.0 work for older 6900 , 5800 series GPUs ?!

and yes 5% is too high , period

CiscoStud

newbie

Activity: 20

Merit: 0

Quote from: demios on July 27, 2014, 06:12:26 PM

people, 6.1 miner sucks.
it shows a couple % more hash in miner itself, but pool says 20-30% less, and you get 20-30% less xmr in your wallet.

also, clay added two more dev fee adresses for you guys that are using older minerproxys.

4.0 miner + minerproxy works the best.

5% is just too much.

Yup, I totally agree! I was getting robbed using 6.1. Going back to 4.0 brought up my hash at both pools I use. **6.1 is a piece of shit**

Burninj

legendary

Activity: 1148

Merit: 1000

what would be the bounty for a gpu cryptonite miner?

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 246. (Read 2145041 times)