Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 242. (Read 2145041 times)
what about (diff to 52448 ) and THR0 or THR1
08/13/14-01:31:24 - New job received
Speed: 322 h/s, TotalHashes: 119K, DevHashes: 5K Mining time: 00:06
08/13/14-01:32:13 - SHARE FOUND (target 72202) - (THR 16)
08/13/14-01:33:21 - New job received
Speed: 320 h/s, TotalHashes: 155K, DevHashes: 6K Mining time: 00:08
08/13/14-01:33:30 - New job received
Speed: 320 h/s, TotalHashes: 158K, DevHashes: 6K Mining time: 00:08
08/13/14-01:34:43 - New job received
Speed: 320 h/s, TotalHashes: 181K, DevHashes: 8K Mining time: 00:09
08/13/14-01:34:58 - New job received
Speed: 320 h/s, TotalHashes: 186K, DevHashes: 8K Mining time: 00:09
08/13/14-01:35:42 - SHARE FOUND (target 53483) - (THR 7)
========
Mr Claymore, can u tell me
what‘s mind about (THR7) or (THR17), and some time share show me (THR0)
?
-----------
and if i used wolf miner, it will be
[2014-08-13 01:41:07] Pool set diff to 25000.1
[2014-08-13 01:41:07] Stratum detected new block
[2014-08-13 01:41:35] Stratum detected new block
[2014-08-13 01:41:48] Stratum detected new block
[2014-08-13 01:42:25] accepted: 1/1 (100.00%), 203.69 H/s at diff 25000.1 (yay!!
!)
[2014-08-13 01:42:47] accepted: 2/2 (100.00%), 203.42 H/s at diff 25000.1 (yay!!
!)
[2014-08-13 01:43:14] Pool set diff to 50000.2
-----------------
I use cpu miner 3.3 faster more than wolf 1/3 ??!!
Speed: 322 h/s, TotalHashes: 119K, DevHashes: 5K Mining time: 00:06
08/13/14-01:32:13 - SHARE FOUND (target 72202) - (THR 16)
08/13/14-01:33:21 - New job received
Speed: 320 h/s, TotalHashes: 155K, DevHashes: 6K Mining time: 00:08
08/13/14-01:33:30 - New job received
Speed: 320 h/s, TotalHashes: 158K, DevHashes: 6K Mining time: 00:08
08/13/14-01:34:43 - New job received
Speed: 320 h/s, TotalHashes: 181K, DevHashes: 8K Mining time: 00:09
08/13/14-01:34:58 - New job received
Speed: 320 h/s, TotalHashes: 186K, DevHashes: 8K Mining time: 00:09
08/13/14-01:35:42 - SHARE FOUND (target 53483) - (THR 7)
========
Mr Claymore, can u tell me
what‘s mind about (THR7) or (THR17), and some time share show me (THR0)
?
-----------
and if i used wolf miner, it will be
[2014-08-13 01:41:07] Pool set diff to 25000.1
[2014-08-13 01:41:07] Stratum detected new block
[2014-08-13 01:41:35] Stratum detected new block
[2014-08-13 01:41:48] Stratum detected new block
[2014-08-13 01:42:25] accepted: 1/1 (100.00%), 203.69 H/s at diff 25000.1 (yay!!
!)
[2014-08-13 01:42:47] accepted: 2/2 (100.00%), 203.42 H/s at diff 25000.1 (yay!!
!)
[2014-08-13 01:43:14] Pool set diff to 50000.2
-----------------
I use cpu miner 3.3 faster more than wolf 1/3 ??!!
Very good. long time no see you
Claymore are you here?
claymore should be on a trip to bahamas
it's meaningless to develop new version, because all miners hash power will grow, therefore
no one can get more profit.
no one can get more profit.
I agree with you. Claymore should only develop the miner further if he can extract more mining performance with existing power consumption, so that we can compete with CPU. At present, CPU is more efficient than GPU.
How much has 6990 hash and power ? On Elpida and Hynix ?
Becouse 2 card is arrived soon, and i don't know what memory installed.
Becouse 2 card is arrived soon, and i don't know what memory installed.
it's meaningless to develop new version, because all miners hash power will grow, therefore
no one can get more profit.
no one can get more profit.
I'm on a trip, I will be back in a day. v6.1 is not final version 
I'm on a trip, I will be back in a day. v6.1 is not final version
add XCN to your list
I'm on a trip, I will be back in a day. v6.1 is not final version
Safe to say Claymore is done with updates?
He's been awefully quiet lately. Not like him.
Perhaps he's working on private miners for private clients.
Safe to say Claymore is done with updates?
How much has 6990 hash and power ? On Elpida and Hynix ?
Becouse 2 card is arrived soon, and i don't know what memory installed.
Becouse 2 card is arrived soon, and i don't know what memory installed.
I've been hearing good things about this.
Cheers!
stop scaming the Claymore, even he must go to vacation, it's August and he's probaly resting. and if you are smart enough make your own miner with 0% fee, until then stop crying about 5%.
Looks like Claymore get tired of your bargain and "the king has left the building..."
-li 1 -a 1 Remember to add that to your command line I run my 290s at full 100% default settings for MSI been running long time week or more 14.6 drivers Win 7 8 gigs ram
Try this: install driver 13.12, install MSI Afterburner 3.0.1 and set up with the settings 1000/1250 and in the bat file try only this
setx GPU_MAX_ALLOC_PERCENT 80
NsGpuCNMiner.exe -o stratum+tcp://bcn.extremepool.org:7777 -u -p
on this settings i am running 18 r9 290 tri-x for past two monts and i have none problem.
This miner app is pissing me right off, I cannot get any version past 3.4 to run stable without the OS hanging. I have tried a load of different settings, drivers, underclock's etc and all the same, app crashes and takes out the OS. My batch file looks like this:
:BEGIN
start "CryptoNote" /low /wait NsGpuCNMiner.exe -o stratum+tcp://pool.minexmr.com:7777 -p x -u [XMR Address] -a 2 -wd 1 -ee 1
timeout /t 30
GOTO BEGIN
exit
I have tried both 13.12 and 14.6 drivers, Windows 7 and 8.1, I currently have my tri-x cards underclocked to 947/1250 but it also happens with them at stock clocks, I have 6 cards in each rig and nothing I do seems to fix the hangs in OpenCL call, app crash and then OS hang.
Beyond frustrated.
Anyone running similar set-ups, what OS, drivers, miner version etc?
Please create a Linux version of this app, with the 5% fee you have made from everyone surely should fund a Linux version, or maybe even just open source it and let the community make this application better.
:BEGIN
start "CryptoNote" /low /wait NsGpuCNMiner.exe -o stratum+tcp://pool.minexmr.com:7777 -p x -u [XMR Address] -a 2 -wd 1 -ee 1
timeout /t 30
GOTO BEGIN
exit
I have tried both 13.12 and 14.6 drivers, Windows 7 and 8.1, I currently have my tri-x cards underclocked to 947/1250 but it also happens with them at stock clocks, I have 6 cards in each rig and nothing I do seems to fix the hangs in OpenCL call, app crash and then OS hang.
Beyond frustrated.
Anyone running similar set-ups, what OS, drivers, miner version etc?
Please create a Linux version of this app, with the 5% fee you have made from everyone surely should fund a Linux version, or maybe even just open source it and let the community make this application better.
Try this: install driver 13.12, install MSI Afterburner 3.0.1 and set up with the settings 1000/1250 and in the bat file try only this
setx GPU_MAX_ALLOC_PERCENT 80
NsGpuCNMiner.exe -o stratum+tcp://bcn.extremepool.org:7777 -u -p
on this settings i am running 18 r9 290 tri-x for past two monts and i have none problem.
This miner app is pissing me right off, I cannot get any version past 3.4 to run stable without the OS hanging. I have tried a load of different settings, drivers, underclock's etc and all the same, app crashes and takes out the OS. My batch file looks like this:
:BEGIN
start "CryptoNote" /low /wait NsGpuCNMiner.exe -o stratum+tcp://pool.minexmr.com:7777 -p x -u [XMR Address] -a 2 -wd 1 -ee 1
timeout /t 30
GOTO BEGIN
exit
I have tried both 13.12 and 14.6 drivers, Windows 7 and 8.1, I currently have my tri-x cards underclocked to 947/1250 but it also happens with them at stock clocks, I have 6 cards in each rig and nothing I do seems to fix the hangs in OpenCL call, app crash and then OS hang.
Beyond frustrated.
Anyone running similar set-ups, what OS, drivers, miner version etc?
Please create a Linux version of this app, with the 5% fee you have made from everyone surely should fund a Linux version, or maybe even just open source it and let the community make this application better.
:BEGIN
start "CryptoNote" /low /wait NsGpuCNMiner.exe -o stratum+tcp://pool.minexmr.com:7777 -p x -u [XMR Address] -a 2 -wd 1 -ee 1
timeout /t 30
GOTO BEGIN
exit
I have tried both 13.12 and 14.6 drivers, Windows 7 and 8.1, I currently have my tri-x cards underclocked to 947/1250 but it also happens with them at stock clocks, I have 6 cards in each rig and nothing I do seems to fix the hangs in OpenCL call, app crash and then OS hang.
Beyond frustrated.
Anyone running similar set-ups, what OS, drivers, miner version etc?
Please create a Linux version of this app, with the 5% fee you have made from everyone surely should fund a Linux version, or maybe even just open source it and let the community make this application better.
Try this: install driver 13.12, install MSI Afterburner 3.0.1 and set up with the settings 1000/1250 and in the bat file try only this
setx GPU_MAX_ALLOC_PERCENT 80
NsGpuCNMiner.exe -o stratum+tcp://bcn.extremepool.org:7777 -u -p
on this settings i am running 18 r9 290 tri-x for past two monts and i have none problem.
Same here but with 6 x GPUs.
This miner app is pissing me right off, I cannot get any version past 3.4 to run stable without the OS hanging. I have tried a load of different settings, drivers, underclock's etc and all the same, app crashes and takes out the OS. My batch file looks like this:
:BEGIN
start "CryptoNote" /low /wait NsGpuCNMiner.exe -o stratum+tcp://pool.minexmr.com:7777 -p x -u [XMR Address] -a 2 -wd 1 -ee 1
timeout /t 30
GOTO BEGIN
exit
I have tried both 13.12 and 14.6 drivers, Windows 7 and 8.1, I currently have my tri-x cards underclocked to 947/1250 but it also happens with them at stock clocks, I have 6 cards in each rig and nothing I do seems to fix the hangs in OpenCL call, app crash and then OS hang.
Beyond frustrated.
Anyone running similar set-ups, what OS, drivers, miner version etc?
Please create a Linux version of this app, with the 5% fee you have made from everyone surely should fund a Linux version, or maybe even just open source it and let the community make this application better.
:BEGIN
start "CryptoNote" /low /wait NsGpuCNMiner.exe -o stratum+tcp://pool.minexmr.com:7777 -p x -u [XMR Address] -a 2 -wd 1 -ee 1
timeout /t 30
GOTO BEGIN
exit
I have tried both 13.12 and 14.6 drivers, Windows 7 and 8.1, I currently have my tri-x cards underclocked to 947/1250 but it also happens with them at stock clocks, I have 6 cards in each rig and nothing I do seems to fix the hangs in OpenCL call, app crash and then OS hang.
Beyond frustrated.
Anyone running similar set-ups, what OS, drivers, miner version etc?
Please create a Linux version of this app, with the 5% fee you have made from everyone surely should fund a Linux version, or maybe even just open source it and let the community make this application better.
Try this: install driver 13.12, install MSI Afterburner 3.0.1 and set up with the settings 1000/1250 and in the bat file try only this
setx GPU_MAX_ALLOC_PERCENT 80
NsGpuCNMiner.exe -o stratum+tcp://bcn.extremepool.org:7777 -u -p
on this settings i am running 18 r9 290 tri-x for past two monts and i have none problem.
Jump to: