Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1055. (Read 6590565 times)

doing it now but i have done this once already. i did read somewhere that if you uncheck the hdmi audio box it will fix it to so thats what im trying i will update when finished

Remove drivers with DDU and reinstall

HELP!!!!!!! New Nitro RX470 8gb card not working on my rig... getting openCL call error. just 1 min after starting mining card doing this on stock settings. I feel like its a bad card because i switched around alot of things today and installed another new card that worked fine... is there anyway to reinstall the openCL settings in the GPU or is there a fix for this problem.
oh yeah i am running 8gb ram
1200 watt psu
powered risers
btc pro mobo

Yes, I can confirm that it works with -etha 2.  Changed from -etha 0.
The blame is on me for not reading the manual thorougly.
I like the colors and the fact I can see gpu temps now.
Thanks claymore.

14:57:37:507   bd8   GPU #0: Ellesmere, 8192 MB available, 32 compute units
14:57:37:508   bd8   GPU #1: Pitcairn, 2048 MB available, 20 compute units
14:57:37:508   bd8   GPU #1 recognized as Radeon 270/270X
14:57:37:509   bd8   GPU #2: Ellesmere, 8192 MB available, 36 compute units
14:57:37:509   bd8   GPU #2 recognized as Radeon RX 480

Ellesmere 32 compute units (RX470) didn't say that it is recognized as RX470. It didn't affect mining, but you can fix it. This is on both ETH and ZEC miners. And if you can add yellow temperature colors like in ZEC miner.

Miner must work fine with "-etha 2" option, also miner must select this mode automatically for 4xx cards.

claymore 7.3 is causing driver crash in ubuntu 16.04 with amdgpu-pro 16.30.
It runs fine on ubuntu 14.04 with fglrx drivers.

Messages were added to /var/log/syslog contiuously, like:

Nov 17 17:53:32 rig2 kernel: [38207.575782] amdgpu 0000:01:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x081049FF
Nov 17 17:53:32 rig2 kernel: [38207.575783] amdgpu 0000:01:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0E004001
Nov 17 17:53:32 rig2 kernel: [38207.575784] VM fault (0x01, vmid 7) at page 135285247, read from 'TC1' (0x54433100) (4)
Nov 17 17:53:32 rig2 kernel: [38207.575804] amdgpu 0000:06:00.0: GPU fault detected: 147 0x0fe88801
Nov 17 17:53:32 rig2 kernel: [38207.575805] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x081049FD
Nov 17 17:53:32 rig2 kernel: [38207.575806] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0E088001
Nov 17 17:53:32 rig2 kernel: [38207.575807] VM fault (0x01, vmid 7) at page 135285245, read from 'TC9' (0x54433900) (136)
Nov 17 17:53:32 rig2 kernel: [38207.575847] amdgpu 0000:01:00.0: GPU fault detected: 147 0x0ff88401
Nov 17 17:53:32 rig2 kernel: [38207.575848] amdgpu 0000:01:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x081049FF

It will fill the disk quite quickly so I had to revert back to version 6.3
I havent tried amdgpu-pro version 16.40 and dont know if I should invest the time.

Ok I'll add it in a day.

Hi there after returning from zcash to eth I get "OpenCL error -4 (0) - cannot create DAG on GPU" any idea? I already restarted, turn off on power - same thing....

@Claymore can you put -retrydelay option in this great miner as you did in the awesome ZEC miner? So we could use it in multi algo pools
10x in advance.

Don't touch the voltage in bios settings!
Also set 900mv to the memory, not only the core.

Claymore do you want push nvidia gtx 1070 on ETH and ETC ? I think this board go to 35 mh/s .

Hello

Dwoper?

I lower the voltage in the AMD software.

I put 900

But we see in gpu-Zque the voltage is a 981.

I have to modify in the bios I think?



I do not understand why I have 65285 in the voltage column ... I have to put 920 in this box?

Maybe any private miner.. although  more hashrate improvements could be difficult to reach

yes they are 2GB I just reinstall one of my rigs with fresh ubuntu 14.04 and now it works... even without setting variables because I forgot them !!! I have no idea what happend here why now works and why not before reinstall...

So it's either you system variables that are not set (seems you took care of that already) or your swap file that's too small (setting may have reset)

Edit: don't you have 2 Gb GPUS ? The dag increased while you where mining zcash

Yes - not working
also power off - again not working

I had to reboot to mine ETH after ZCASH and vice versa, did you simply try that ?

Hello, I mined zcash and now return to eth, but when I started the miner - OpenCL error -4 (0) - cannot create DAG on GPU
that's on all of my rigs, any idea why and how to fix it (all variables are set already)

Helo Again

I test all of my RX480 on all PCI-E and every time is the same 2 of them just colapse the pc.I let them 4GPUs mining for 48(without problem)
today i try FURMARK GPU stress test and test just dont start(black screen + restart).The interesting part is that when i connect the "BAD" cards one by one,they mining ~7-10minutes and i have flash black screen and after that on the monitor can read Enter Sleeping mode and that it.May be the cards are fault?


And the last test was 4good GPUs + one bad GPU=5min mining and GPU hand out,but before that i get msg "stratum socket send failed 10054"
I go back to 4GPUs and may be this two need to be back in shop.

Greetings!