thanks do you have any idea of the name of these files
Sorry, but no. I'm guessing it must be a number of .dll files but I don't know their exact names.
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1058. (Read 6590565 times)
November 09, 2016, 09:41:32 AM
thanks do you have any idea of the name of these files
Sorry, but no. I'm guessing it must be a number of .dll files but I don't know their exact names.
November 09, 2016, 09:05:42 AM
yep thanks I have all ready got that and the page file ,,,,, I'm using 14.6 drivers on r9 290's because I get higher mh/s with claymores zec miner and it runs fine on zec it just will not work on the eth miner
The ETH miner requires at least 15.12 drivers.
Search this thread and you'll find that you can put just some drivers files directly inside the ETH miner directory to make it work
thanks do you have any idea of the name of these files
November 09, 2016, 09:03:17 AM
yep thanks I have all ready got that and the page file ,,,,, I'm using 14.6 drivers on r9 290's because I get higher mh/s with claymores zec miner and it runs fine on zec it just will not work on the eth miner
The ETH miner requires at least 15.12 drivers.
Search this thread and you'll find that you can put just some drivers files directly inside the ETH miner directory to make it work
November 09, 2016, 08:23:07 AM
does any one know what cause this
OpenCL error - cannot allocate big buffer for DAG
OpenCL error -38 - cannot write buffer for DAG
ETH: 11/08/16-20:00:22 - New job from europe1.ethereum.miningpoolhub.com:20535
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
cheers
OpenCL error - cannot allocate big buffer for DAG
OpenCL error -38 - cannot write buffer for DAG
ETH: 11/08/16-20:00:22 - New job from europe1.ethereum.miningpoolhub.com:20535
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
cheers
Make sure you have a 16GB pagefile and run a bat file similar to this:
Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe...
yep thanks I have all ready got that and the page file ,,,,, I'm using 14.6 drivers on r9 290's because I get higher mh/s with claymores zec miner and it runs fine on zec it just will not work on the eth miner
November 08, 2016, 09:03:45 PM
does any one know what cause this
OpenCL error - cannot allocate big buffer for DAG
OpenCL error -38 - cannot write buffer for DAG
ETH: 11/08/16-20:00:22 - New job from europe1.ethereum.miningpoolhub.com:20535
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
cheers
OpenCL error - cannot allocate big buffer for DAG
OpenCL error -38 - cannot write buffer for DAG
ETH: 11/08/16-20:00:22 - New job from europe1.ethereum.miningpoolhub.com:20535
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
cheers
Make sure you have a 16GB pagefile and run a bat file similar to this:
Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe...
November 08, 2016, 05:11:10 PM
does any one know what cause this
OpenCL error - cannot allocate big buffer for DAG
OpenCL error -38 - cannot write buffer for DAG
ETH: 11/08/16-20:00:22 - New job from europe1.ethereum.miningpoolhub.com:20535
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
cheers
OpenCL error - cannot allocate big buffer for DAG
OpenCL error -38 - cannot write buffer for DAG
ETH: 11/08/16-20:00:22 - New job from europe1.ethereum.miningpoolhub.com:20535
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
cheers
It's most likely due to the fact that the DAG size is too much for 2GB GPUs.
November 08, 2016, 04:52:08 PM
does any one know what cause this
OpenCL error - cannot allocate big buffer for DAG
OpenCL error -38 - cannot write buffer for DAG
ETH: 11/08/16-20:00:22 - New job from europe1.ethereum.miningpoolhub.com:20535
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
cheers
OpenCL error - cannot allocate big buffer for DAG
OpenCL error -38 - cannot write buffer for DAG
ETH: 11/08/16-20:00:22 - New job from europe1.ethereum.miningpoolhub.com:20535
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
cheers
It's most likely due to the fact that the DAG size is too much for 2GB GPUs.
November 08, 2016, 04:13:27 PM
does any one know what cause this
OpenCL error - cannot allocate big buffer for DAG
OpenCL error -38 - cannot write buffer for DAG
ETH: 11/08/16-20:00:22 - New job from europe1.ethereum.miningpoolhub.com:20535
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
cheers
OpenCL error - cannot allocate big buffer for DAG
OpenCL error -38 - cannot write buffer for DAG
ETH: 11/08/16-20:00:22 - New job from europe1.ethereum.miningpoolhub.com:20535
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
cheers
November 08, 2016, 04:02:29 PM
Sorry, I'm too busy currently, also have to sleep sometimes
Man, you released 4 versions of your ZEC miner... Focus on this one for a while, will you?
Please?
I hope it will be ZEC + ETH (ETC)
what do you think Claymore?
peace
November 08, 2016, 03:05:56 PM
Just decided (well, was going to) to start mining Eth again after not doing so for a while.
Are 2GB cards now useless due to DAG size?
Are 2GB cards now useless due to DAG size?
November 07, 2016, 07:12:48 PM
Sorry, I'm too busy currently, also have to sleep sometimes
Man, you released 4 versions of your ZEC miner... Focus on this one for a while, will you?
Please?
November 07, 2016, 05:50:27 PM
@Claymore, we need a new second coin to mine... DCR, LBR and SC are worthless
Any ideas?
Any ideas?
Steem
http://coinmarketcap.com/currencies/steem/
Get it done claymore
Sorry, I'm too busy currently, also have to sleep sometimes
November 07, 2016, 05:34:01 PM
@Claymore, we need a new second coin to mine... DCR, LBR and SC are worthless
Any ideas?
Any ideas?
Steem
http://coinmarketcap.com/currencies/steem/
Get it done claymore
November 07, 2016, 05:31:59 PM
@Claymore, we need a new second coin to mine... DCR, LBR and SC are worthless
Any ideas?
Any ideas?
Steem
http://coinmarketcap.com/currencies/steem/
November 07, 2016, 05:22:23 PM
I need help with my 6x 1070 rig.. I keep getting the following error and then the miner crashes and restarts..
I didnt overclock it is on default settings..
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
GPU 0, GpuMiner cu_k02 failed 30, unknown error
GPU 0, GpuMiner kx failed 1
GPU 3, GpuMiner kx failed 1
GPU 5, GpuMiner kx failed 1
GPU 4, GpuMiner cu_k02 failed 30, unknown error
GPU 4, GpuMiner kx failed 1
GPU 1, GpuMiner cu_k02 failed 30, unknown error
GPU 1, GpuMiner kx failed 1
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
Any help would be appreciated.. Thanks
I didnt overclock it is on default settings..
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
GPU 0, GpuMiner cu_k02 failed 30, unknown error
GPU 0, GpuMiner kx failed 1
GPU 3, GpuMiner kx failed 1
GPU 5, GpuMiner kx failed 1
GPU 4, GpuMiner cu_k02 failed 30, unknown error
GPU 4, GpuMiner kx failed 1
GPU 1, GpuMiner cu_k02 failed 30, unknown error
GPU 1, GpuMiner kx failed 1
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
Any help would be appreciated.. Thanks
November 07, 2016, 09:25:17 AM
Is this the more powerfull miner?
November 07, 2016, 09:20:31 AM
Any news for mining ETH + Zcash on nvidia windows ? .
Both are using the same part of the gpu, so that's unlikely to happen November 07, 2016, 08:48:38 AM
Any news for mining ETH + Zcash on nvidia windows ? .
November 07, 2016, 08:07:11 AM
I could not get the remote management to work.. tried.. http://192.168.1.3:3333 and https://192.168.1.3333 and it does not work. Port scanner shows the port open and active but the browser can not open the page just sits there spinning.
Browser meaning a web browser or the remote management app? Unless something changed recently you need to see the application provided in the windows archive for remote management
November 07, 2016, 07:48:34 AM
I could not get the remote management to work.. tried.. http://192.168.1.3:3333 and https://192.168.1.3333 and it does not work. Port scanner shows the port open and active but the browser can not open the page just sits there spinning.
Try this http://localhost:3333/
Jump to: