Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 141.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: AzzAz on February 26, 2017, 11:30:06 AM

@ Claymore: Can you please change that hard visible purple line to orange or yellow or whatever?
Many of us use old bad lcd's that purple is unreadable. This for your dual miner I need, but posted here, sry

In v12.2 use "-colors 4" to use four colors only (gpu temp stats is 5th). I will add same to dual miner in next update.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

v12.2:

- fixed issue with "-ttli" option.
- improved "-mport" option, now you can specify network adapter IP for incoming connections for remote management.
- added "-old 1" option, try to use it if v12.0 works stable for you, but v12.1 is unstable.

AzzAz

legendary

Activity: 1030

Merit: 1006

Quote from: Claymore on February 26, 2017, 05:48:40 AM

Quote from: UnclWish on February 25, 2017, 07:42:42 PM

Finally I find it! A know the problem why GPU's hangs on 12.1! Maybe not all GPU's but on my 280X and 270X it so...

I just read the logs.. and...

GPU's hangs if used option -ttli and temperature of GPU achieves this value.
After miner must to low intensity for cooldown GPU.
And 12.1 on this hangs GPU at all.
In logs appears string "Gpu # -ttli apply delta 1" and after that GPU hangs till restart.

To verify this I choose low -ttli for 270X and it hangs at chosen temperature!

Why my 280X hangs all time and 270X is not? Because 280X is hotter and more quickly achieves ttli temperature... And when I change intensity GPU allready was hot and therefore reach ttli temperature quickly...
I'm scared to run miner without -ttli... Will set tstop at the moment...

Claymore, can you check this and correct?

Thanks for reporting, I can confirm this bug. I will release an update within a few hours.

@ Claymore: Can you please change that hard visible purple line to orange or yellow or whatever?
Many of us use old bad lcd's that purple is unreadable. This for your dual miner I need, but posted here, sry

Corerj

newbie

Activity: 23

Merit: 0

Quote from: UnclWish on February 25, 2017, 09:27:10 PM

Quote from: Corerj on February 25, 2017, 09:19:35 PM

Quote from: UnclWish on February 25, 2017, 07:42:42 PM

Finally I find it! A know the problem why GPU's hangs on 12.1! Maybe not all GPU's but on my 280X and 270X it so...

I just read the logs.. and...

GPU's hangs if used option -ttli and temperature of GPU achieves this value.
After miner must to low intensity for cooldown GPU.
And 12.1 on this hangs GPU at all.
In logs appears string "Gpu # -ttli apply delta 1" and after that GPU hangs till restart.

To verify this I choose low -ttli for 270X and it hangs at chosen temperature!

Why my 280X hangs all time and 270X is not? Because 280X is hotter and more quickly achieves ttli temperature... And when I change intensity GPU allready was hot and therefore reach ttli temperature quickly...
I'm scared to run miner without -ttli... Will set tstop at the moment...

Claymore, can you check this and correct?

i'll try here...indeed i use -ttli too

I am allready installed back latest 17.2.1 and miner 12.1 runs without any issues or GPU hangs all this time. I was right, I just removed ttli option and add tstop until Claymore fix this.

excellent

yatta

member

Activity: 93

Merit: 10

Anybody using 16.12.2 drivers with modded bios ?

pilalove

newbie

Activity: 16

Merit: 0

Hi,
would you help me how to mining with 8xGPU (8 x HD 7950)

eckmar

legendary

Activity: 1878

Merit: 1038

Telegram: https://t.me/eckmar

I'm getting some low speeds with all my cards with intensity 6
R9 380 is getting about 180 H/s
and RX 470 is getting about 280 H/s
Anyone know what would the problem be ? I'm using latest version of this miner

grizscom

sr. member

Activity: 245

Merit: 256

Quote from: Pasutinmeur on February 26, 2017, 03:59:32 AM

Is there a memory leakage in the 12.1?

The memory usage of the miner increases over time until the OS closes the program.

Thank you, I think so too, although there is no time to do debugging.
is no correction, bolted crutch as miners restart.

ujang1

hero member

Activity: 558

Merit: 500

Quote from: Raja_MBZ on February 26, 2017, 04:21:19 AM

Quote from: Pasutinmeur on February 26, 2017, 03:59:32 AM

Is there a memory leakage in the 12.1?

The memory usage of the miner increases over time until the OS closes the program.

I don't know how but I fixed that problem after changing my OS from Windows 7 to Windows 10.

Which OS are you using right now?

I have no problem with that, I have two farms with different operating systems (Windows 7 and Windows 10)

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: UnclWish on February 25, 2017, 07:42:42 PM

Finally I find it! A know the problem why GPU's hangs on 12.1! Maybe not all GPU's but on my 280X and 270X it so...

I just read the logs.. and...

GPU's hangs if used option -ttli and temperature of GPU achieves this value.
After miner must to low intensity for cooldown GPU.
And 12.1 on this hangs GPU at all.
In logs appears string "Gpu # -ttli apply delta 1" and after that GPU hangs till restart.

To verify this I choose low -ttli for 270X and it hangs at chosen temperature!

Why my 280X hangs all time and 270X is not? Because 280X is hotter and more quickly achieves ttli temperature... And when I change intensity GPU allready was hot and therefore reach ttli temperature quickly...
I'm scared to run miner without -ttli... Will set tstop at the moment...

Claymore, can you check this and correct?

Thanks for reporting, I can confirm this bug. I will release an update within a few hours.

Bamselk

member

Activity: 69

Merit: 10

Quote from: Raja_MBZ on February 26, 2017, 04:21:19 AM

Quote from: Pasutinmeur on February 26, 2017, 03:59:32 AM

Is there a memory leakage in the 12.1?

The memory usage of the miner increases over time until the OS closes the program.

I don't know how but I fixed that problem after changing my OS from Windows 7 to Windows 10.

Which OS are you using right now?

I have similar problem with Windows 8.1.

Raja_MBZ

legendary

Activity: 1834

Merit: 1520

Quote from: Pasutinmeur on February 26, 2017, 03:59:32 AM

Is there a memory leakage in the 12.1?

The memory usage of the miner increases over time until the OS closes the program.

I don't know how but I fixed that problem after changing my OS from Windows 7 to Windows 10.

Which OS are you using right now?

Pasutinmeur

full member

Activity: 302

Merit: 100

Is there a memory leakage in the 12.1?

The memory usage of the miner increases over time until the OS closes the program.

orbital_station1

newbie

Activity: 24

Merit: 0

After I moved one (Sapphire) of my 2 cards from "normal" pcie x16 slot to riser I get 15 H/s less on average on that card.

Also I switched my monitor from Sapphire to MSI.

Second card (MSI) which was always on riser stayed the same.

I have those blue usb 3 risers, could this be an riser issue? Or something else?

(v12.1, 15.12, oc settings same as before)

grizscom

sr. member

Activity: 245

Merit: 256

@ Claymore:
Maybe I had a bug at v12.1 .

I noticed sometimes rigs go into disk operations and freezes. Used primarily ubuntu 14.04 .

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: Corerj on February 25, 2017, 09:19:35 PM

Quote from: UnclWish on February 25, 2017, 07:42:42 PM

Finally I find it! A know the problem why GPU's hangs on 12.1! Maybe not all GPU's but on my 280X and 270X it so...

I just read the logs.. and...

GPU's hangs if used option -ttli and temperature of GPU achieves this value.
After miner must to low intensity for cooldown GPU.
And 12.1 on this hangs GPU at all.
In logs appears string "Gpu # -ttli apply delta 1" and after that GPU hangs till restart.

To verify this I choose low -ttli for 270X and it hangs at chosen temperature!

Why my 280X hangs all time and 270X is not? Because 280X is hotter and more quickly achieves ttli temperature... And when I change intensity GPU allready was hot and therefore reach ttli temperature quickly...
I'm scared to run miner without -ttli... Will set tstop at the moment...

Claymore, can you check this and correct?

i'll try here...indeed i use -ttli too

I am allready installed back latest 17.2.1 and miner 12.1 runs without any issues or GPU hangs all this time. I was right, I just removed ttli option and add tstop until Claymore fix this.

Corerj

newbie

Activity: 23

Merit: 0

Quote from: UnclWish on February 25, 2017, 07:42:42 PM

Finally I find it! A know the problem why GPU's hangs on 12.1! Maybe not all GPU's but on my 280X and 270X it so...

I just read the logs.. and...

GPU's hangs if used option -ttli and temperature of GPU achieves this value.
After miner must to low intensity for cooldown GPU.
And 12.1 on this hangs GPU at all.
In logs appears string "Gpu # -ttli apply delta 1" and after that GPU hangs till restart.

To verify this I choose low -ttli for 270X and it hangs at chosen temperature!

Why my 280X hangs all time and 270X is not? Because 280X is hotter and more quickly achieves ttli temperature... And when I change intensity GPU allready was hot and therefore reach ttli temperature quickly...
I'm scared to run miner without -ttli... Will set tstop at the moment...

Claymore, can you check this and correct?

i'll try here...indeed i use -ttli too

UnclWish

sr. member

Activity: 1484

Merit: 253

Finally I find it! A know the problem why GPU's hangs on 12.1! Maybe not all GPU's but on my 280X and 270X it so...

I just read the logs.. and...

GPU's hangs if used option -ttli and temperature of GPU achieves this value.
After miner must to low intensity for cooldown GPU.
And 12.1 on this hangs GPU at all.
In logs appears string "Gpu # -ttli apply delta 1" and after that GPU hangs till restart.

To verify this I choose low -ttli for 270X and it hangs at chosen temperature!

Why my 280X hangs all time and 270X is not? Because 280X is hotter and more quickly achieves ttli temperature... And when I change intensity GPU allready was hot and therefore reach ttli temperature quickly...
I'm scared to run miner without -ttli... Will set tstop at the moment...

Claymore, can you check this and correct?

cohnhead

hero member

Activity: 840

Merit: 1000

anyone have good settings for and msi twin frozer rx 470 8gb
windows 7

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: Corerj on February 25, 2017, 06:09:44 PM

Quote from: UnclWish on February 25, 2017, 05:43:02 PM

Quote from: mr.bRxXx on February 25, 2017, 05:08:48 PM

Quote from: UnclWish on February 24, 2017, 02:06:44 PM

Using R9 280X with modded bios and some overclocked GPU. v12 works fine. Tested over 2-3 days working without issuies.

With v12.1 only 1st intensity is most stable. With any other intensity miner after about 10 min starts to show 0 hashrates and 0% GPU load.
With 1st intensity miner works normal 20-30 min and then speed is 0 too. Miner restarts and so on.

Returning back to v12. It's stable for me.

Windows 10 Pro.
Tryed 15.12 drivers, disable overclocking. Nothing helps.
Any other miners works fine. PSU 60-70% load.

After some couple of days testing, i find 16.3.2 drivers performs better in terms of stability than 15.12,
on all my 7970/280x/380/390 rigs...
And it happens on v12.0 and v12.1 miner ... (got some strange instability with 280x rigs, and tried 16.3.2,
everything works perfect so far).

b.r.
Alex

Thanks! I'll try 16.3.2.

P.S. Are you tried other WHQL versions like 16.12.2, 16.9.2, 16.7.3?

im using 16.10.2, and its fine, tried 16.12.2 and no success....

Just installed 16.3.2 testing 12.1 in progress...
On 16.10.2 7970/280x/380/390 rigs works without hangs?

EDIT: After 13 minutes of mining on 16.3.2 + v12.1 with maximum intensity GPU0 hangs (280X). Try to lowing intesity by one step.
Interesting that 270X works stable on any driver and max.intensity with 12.1...

EDIT2: Intensity 4 couses hangs 280X so as 5... Trying 3...

EDIT3: Intensity 3 also hangs 280X... Trying 2... I have feeling that low intensity hangs more quickly... 5 - 13 min. 4 and 3 - less than 5 min. Or it's random...

EDIT4: Even Intensity 1 and 2 causes 280X to hang... I think it's no a driver problem...

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 141. (Read 3839201 times)