Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 188. (Read 3839201 times)
Can someone running 7950 cards post what they are getting for hash rates and how much power they are drawing? a friend of mine wants to sell me his 7950 and I want to know if it is worth running at all. -thanks
Running a RX 480 currently. (Along with a R9 290), so I'm using Crimson 16.12.2 drivers as recommended.
17.1.1 was JUST released yesterday. Has anyone tried this yet to test performance?
I may wait, they're still non-WHQL release, I always wait until they have signed WHQL releases. Not sure why they release them as it causes issues with Windows 10 1607+ if they aren't properly signed.
17.1.1 was JUST released yesterday. Has anyone tried this yet to test performance?
I may wait, they're still non-WHQL release, I always wait until they have signed WHQL releases. Not sure why they release them as it causes issues with Windows 10 1607+ if they aren't properly signed.
When will be new version available?
Right about the time Claymore posts it.
When will be new version available?
we need updates for all of the algorithms in coin production and new drivers amd 17.1.1 because the new wood Megaherz more for r 9 380 Tonga ETH - Total Speed: 68.660 Mh/s Total Shares: 1364, Rejected: 0, Time: 05:20
ETH: GPU0 23.165 Mh/s, GPU1 23.227 Mh/s, GPU2 22.268 Mh/s
DCR - Total Speed: 1029.900 Mh/s Total Shares: 221, Rejected: 0
DCR: GPU0 347.475 Mh/s, GPU1 348.406 Mh/s, GPU2 334.019 Mh/s and what configuration you have for cards there are not suitable and have to configure only wattmen gpu:1100 ,memory:1630 consumption +20 mining etherum
ETH: GPU0 23.165 Mh/s, GPU1 23.227 Mh/s, GPU2 22.268 Mh/s
DCR - Total Speed: 1029.900 Mh/s Total Shares: 221, Rejected: 0
DCR: GPU0 347.475 Mh/s, GPU1 348.406 Mh/s, GPU2 334.019 Mh/s and what configuration you have for cards there are not suitable and have to configure only wattmen gpu:1100 ,memory:1630 consumption +20 mining etherum
I think you posted on the wrong thread
This is Claymore's Zcash thread, not ETH dual miner.
we need updates for all of the algorithms in coin production and new drivers amd 17.1.1 because the new wood Megaherz more for r 9 380 Tonga ETH - Total Speed: 68.660 Mh/s Total Shares: 1364, Rejected: 0, Time: 05:20
ETH: GPU0 23.165 Mh/s, GPU1 23.227 Mh/s, GPU2 22.268 Mh/s
DCR - Total Speed: 1029.900 Mh/s Total Shares: 221, Rejected: 0
DCR: GPU0 347.475 Mh/s, GPU1 348.406 Mh/s, GPU2 334.019 Mh/s and what configuration you have for cards there are not suitable and have to configure only wattmen gpu:1100 ,memory:1630 consumption +20 mining etherum
ETH: GPU0 23.165 Mh/s, GPU1 23.227 Mh/s, GPU2 22.268 Mh/s
DCR - Total Speed: 1029.900 Mh/s Total Shares: 221, Rejected: 0
DCR: GPU0 347.475 Mh/s, GPU1 348.406 Mh/s, GPU2 334.019 Mh/s and what configuration you have for cards there are not suitable and have to configure only wattmen gpu:1100 ,memory:1630 consumption +20 mining etherum
Yes I'm working on new version with speedup for all cards. Need a few more days though.
It's been about 5 days. Hopefully Claymore's next release will crush Optiminer.
I hope so too, I like coinotron pool, and optiminer doesnt work there. So far Claymore has been playing catchup unfortunately
But we can still hope. For tahiti i think claymore is much better though. 
claymore is busy preparing pascal miner
nope pascal its same profit as ETH/XMR/ZEC not big profit when solo mining, now pool already and solo is dead 
Soo, Claymore can you tell us news about your new miner? Like release date, performance, improvements, and what you expect to achieve with your knowledge?
Just quoting Optiminer's GitHub:
Quote
Windows
Full speed can only be achieved under Catalyst 15.12 drivers! See below for how to install the older driver version.
RX4*0 cards are not supported by Catalyst 15.12, I strongly recommend to use linux for mining on them!
Full speed can only be achieved under Catalyst 15.12 drivers! See below for how to install the older driver version.
RX4*0 cards are not supported by Catalyst 15.12, I strongly recommend to use linux for mining on them!
I use Windows, therefore Optiminer is not a very good option, according to them!
just switch to optiminer, at least for now
Optiminer sucks for recent cards like the 4xx
Quote
"solution_rate" : {
"GPU0" : {
"3600s" : 297.62916666666666,
"5s" : 289,
"60s" : 295.56666666666666
},
"GPU1" : {
"3600s" : 295.75083333333333,
"5s" : 307,
"60s" : 296.5
},
"GPU2" : {
"3600s" : 290.90055555555557,
"5s" : 285.39999999999998,
"60s" : 290.58333333333331
},
"GPU3" : {
"3600s" : 291.30250000000001,
"5s" : 296.19999999999999,
"60s" : 289.08333333333331
},
"GPU4" : {
"3600s" : 290.95138888888891,
"5s" : 297.19999999999999,
"60s" : 290.13333333333333
},
"Total" : {
"3600s" : 1466.3077777777778,
"5s" : 1476.5999999999999,
"60s" : 1461.9166666666667
}
"GPU0" : {
"3600s" : 297.62916666666666,
"5s" : 289,
"60s" : 295.56666666666666
},
"GPU1" : {
"3600s" : 295.75083333333333,
"5s" : 307,
"60s" : 296.5
},
"GPU2" : {
"3600s" : 290.90055555555557,
"5s" : 285.39999999999998,
"60s" : 290.58333333333331
},
"GPU3" : {
"3600s" : 291.30250000000001,
"5s" : 296.19999999999999,
"60s" : 289.08333333333331
},
"GPU4" : {
"3600s" : 290.95138888888891,
"5s" : 297.19999999999999,
"60s" : 290.13333333333333
},
"Total" : {
"3600s" : 1466.3077777777778,
"5s" : 1476.5999999999999,
"60s" : 1461.9166666666667
}
Just quoting Optiminer's GitHub:
Quote
Windows
Full speed can only be achieved under Catalyst 15.12 drivers! See below for how to install the older driver version.
RX4*0 cards are not supported by Catalyst 15.12, I strongly recommend to use linux for mining on them!
Full speed can only be achieved under Catalyst 15.12 drivers! See below for how to install the older driver version.
RX4*0 cards are not supported by Catalyst 15.12, I strongly recommend to use linux for mining on them!
I use Windows, therefore Optiminer is not a very good option, according to them!
Yes I'm working on new version with speedup for all cards. Need a few more days though.
It's been about 5 days. Hopefully Claymore's next release will crush Optiminer.
claymore is busy preparing pascal miner
You must be joking? I do not believe that he does.
any update/ new miner release?
would be nice i am anticipating a nice speed up for tonga
And i'm waiting for a speed up on RX4xx cards or even maybe ASM
I wasted a day on that coin. Got zero blocks after dropping 3200w on it for 24h. I see some that have in the TH also get zero blocks in +24h.
this seems to be right http://whattomine.com/coins/172-pasc-pascal
Whattomine is not right, I'm making $3.70/GH on Nanopool.
2 480's is drawing 280W power for about 1.1-1.2GH.
Yeah I used Nanopool at first and then it was not matching whattomine at all. Something was off. Now I am using flypool and its spot on. Drop Nanopool.
claymore is busy preparing pascal miner
Also custom straps, but highly undervolted 
Doing ~1500S/s with 5 rx 480 drawing only 550W ATW.
Doing ~1500S/s with 5 rx 480 drawing only 550W ATW.
just switch to optiminer, at least for now
Optiminer sucks for recent cards like the 4xx
Quote
"solution_rate" : {
"GPU0" : {
"3600s" : 297.62916666666666,
"5s" : 289,
"60s" : 295.56666666666666
},
"GPU1" : {
"3600s" : 295.75083333333333,
"5s" : 307,
"60s" : 296.5
},
"GPU2" : {
"3600s" : 290.90055555555557,
"5s" : 285.39999999999998,
"60s" : 290.58333333333331
},
"GPU3" : {
"3600s" : 291.30250000000001,
"5s" : 296.19999999999999,
"60s" : 289.08333333333331
},
"GPU4" : {
"3600s" : 290.95138888888891,
"5s" : 297.19999999999999,
"60s" : 290.13333333333333
},
"Total" : {
"3600s" : 1466.3077777777778,
"5s" : 1476.5999999999999,
"60s" : 1461.9166666666667
}
"GPU0" : {
"3600s" : 297.62916666666666,
"5s" : 289,
"60s" : 295.56666666666666
},
"GPU1" : {
"3600s" : 295.75083333333333,
"5s" : 307,
"60s" : 296.5
},
"GPU2" : {
"3600s" : 290.90055555555557,
"5s" : 285.39999999999998,
"60s" : 290.58333333333331
},
"GPU3" : {
"3600s" : 291.30250000000001,
"5s" : 296.19999999999999,
"60s" : 289.08333333333331
},
"GPU4" : {
"3600s" : 290.95138888888891,
"5s" : 297.19999999999999,
"60s" : 290.13333333333333
},
"Total" : {
"3600s" : 1466.3077777777778,
"5s" : 1476.5999999999999,
"60s" : 1461.9166666666667
}
Yeah, indeed, good one
Quote
[2017-01-28 16:41:52.105] [info] [Total] 323.2 I/s 630.0 S/s (5s)
[2017-01-28 16:41:55.495] [info] [GPU0] 162.4 I/s 314.2 S/s (5s)
[2017-01-28 16:41:56.438] [info] [GPU1] 161.6 I/s 316.2 S/s (5s)
[2017-01-28 16:41:55.495] [info] [GPU0] 162.4 I/s 314.2 S/s (5s)
[2017-01-28 16:41:56.438] [info] [GPU1] 161.6 I/s 316.2 S/s (5s)
2x 480 8G (custom strap though.. does 840 on xmr as well..)
Greetings!
just switch to optiminer, at least for now
Optiminer sucks for recent cards like the 4xx
Quote
"solution_rate" : {
"GPU0" : {
"3600s" : 297.62916666666666,
"5s" : 289,
"60s" : 295.56666666666666
},
"GPU1" : {
"3600s" : 295.75083333333333,
"5s" : 307,
"60s" : 296.5
},
"GPU2" : {
"3600s" : 290.90055555555557,
"5s" : 285.39999999999998,
"60s" : 290.58333333333331
},
"GPU3" : {
"3600s" : 291.30250000000001,
"5s" : 296.19999999999999,
"60s" : 289.08333333333331
},
"GPU4" : {
"3600s" : 290.95138888888891,
"5s" : 297.19999999999999,
"60s" : 290.13333333333333
},
"Total" : {
"3600s" : 1466.3077777777778,
"5s" : 1476.5999999999999,
"60s" : 1461.9166666666667
}
"GPU0" : {
"3600s" : 297.62916666666666,
"5s" : 289,
"60s" : 295.56666666666666
},
"GPU1" : {
"3600s" : 295.75083333333333,
"5s" : 307,
"60s" : 296.5
},
"GPU2" : {
"3600s" : 290.90055555555557,
"5s" : 285.39999999999998,
"60s" : 290.58333333333331
},
"GPU3" : {
"3600s" : 291.30250000000001,
"5s" : 296.19999999999999,
"60s" : 289.08333333333331
},
"GPU4" : {
"3600s" : 290.95138888888891,
"5s" : 297.19999999999999,
"60s" : 290.13333333333333
},
"Total" : {
"3600s" : 1466.3077777777778,
"5s" : 1476.5999999999999,
"60s" : 1461.9166666666667
}
Just quoting Optiminer's GitHub:
Quote
Windows
Full speed can only be achieved under Catalyst 15.12 drivers! See below for how to install the older driver version.
RX4*0 cards are not supported by Catalyst 15.12, I strongly recommend to use linux for mining on them!
Full speed can only be achieved under Catalyst 15.12 drivers! See below for how to install the older driver version.
RX4*0 cards are not supported by Catalyst 15.12, I strongly recommend to use linux for mining on them!
I use Windows, therefore Optiminer is not a very good option, according to them!
just switch to optiminer, at least for now
Optiminer sucks for recent cards like the 4xx
Quote
"solution_rate" : {
"GPU0" : {
"3600s" : 297.62916666666666,
"5s" : 289,
"60s" : 295.56666666666666
},
"GPU1" : {
"3600s" : 295.75083333333333,
"5s" : 307,
"60s" : 296.5
},
"GPU2" : {
"3600s" : 290.90055555555557,
"5s" : 285.39999999999998,
"60s" : 290.58333333333331
},
"GPU3" : {
"3600s" : 291.30250000000001,
"5s" : 296.19999999999999,
"60s" : 289.08333333333331
},
"GPU4" : {
"3600s" : 290.95138888888891,
"5s" : 297.19999999999999,
"60s" : 290.13333333333333
},
"Total" : {
"3600s" : 1466.3077777777778,
"5s" : 1476.5999999999999,
"60s" : 1461.9166666666667
}
"GPU0" : {
"3600s" : 297.62916666666666,
"5s" : 289,
"60s" : 295.56666666666666
},
"GPU1" : {
"3600s" : 295.75083333333333,
"5s" : 307,
"60s" : 296.5
},
"GPU2" : {
"3600s" : 290.90055555555557,
"5s" : 285.39999999999998,
"60s" : 290.58333333333331
},
"GPU3" : {
"3600s" : 291.30250000000001,
"5s" : 296.19999999999999,
"60s" : 289.08333333333331
},
"GPU4" : {
"3600s" : 290.95138888888891,
"5s" : 297.19999999999999,
"60s" : 290.13333333333333
},
"Total" : {
"3600s" : 1466.3077777777778,
"5s" : 1476.5999999999999,
"60s" : 1461.9166666666667
}
just switch to optiminer, at least for now
Optiminer sucks for recent cards like the 4xx
Jump to: