Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 185. (Read 3839201 times)
The graphics card can be overclocked to PowerColor r9 390 on the Windows?
I can recommend coinotron for Zcash, even though hashrate is smaller. PPLNS is decent, and they have PPS at 3%. worker notifications, etc. I've never really had connection problems there (like dwarf, or sometimes coinmine). Plus its not flypool, so there's that 
@fr4nkthetank - I'm curious what's your problem/issue with flypool?
Oh it was just a joke
Flypool is fine, really. Some time back I compared coinmine/flypool/coinotron/dwarf and found better results at coinmine and coinotron, but then coinmine had connectivity problems. For a week or two they had really bad luck some time back, but that happens to every pool. 
we need new version
asaaapppppppppppp
asaaapppppppppppp
When we can expect v12? I`m tired og glitches with 11.1 on win10 
10:48:27:274 a00 GPU 0 temp = 70, old fan speed = 52, new fan speed = 37
10:48:27:290 a00 GPU 6 temp = 68, old fan speed = 48, new fan speed = 33
10:48:27:306 a00 GPU 12 temp = 69, old fan speed = 54, new fan speed = 39
10:48:27:321 a00 GPU 18 temp = 70, old fan speed = 72, new fan speed = 65
10:48:27:321 a00 GPU 24 temp = 66, old fan speed = 40, new fan speed = 25
10:48:30:118 1328 OC v7, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst
10:48:30:134 1328 OC v7, Reset control for GPU 6, close miner right now if you want to use default control from Catalyst
10:48:30:150 1328 OC v7, Reset control for GPU 12, close miner right now if you want to use default control from Catalyst
10:48:30:165 1328 OC v7, Reset control for GPU 18, close miner right now if you want to use default control from Catalyst
10:48:30:165 1328 OC v7, Reset control for GPU 24, close miner right now if you want to use default control from Catalyst
Any solution? (Rig 5xRX480 8gb, Windows 10, Catalyst 16.12.2)
10:48:27:290 a00 GPU 6 temp = 68, old fan speed = 48, new fan speed = 33
10:48:27:306 a00 GPU 12 temp = 69, old fan speed = 54, new fan speed = 39
10:48:27:321 a00 GPU 18 temp = 70, old fan speed = 72, new fan speed = 65
10:48:27:321 a00 GPU 24 temp = 66, old fan speed = 40, new fan speed = 25
10:48:30:118 1328 OC v7, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst
10:48:30:134 1328 OC v7, Reset control for GPU 6, close miner right now if you want to use default control from Catalyst
10:48:30:150 1328 OC v7, Reset control for GPU 12, close miner right now if you want to use default control from Catalyst
10:48:30:165 1328 OC v7, Reset control for GPU 18, close miner right now if you want to use default control from Catalyst
10:48:30:165 1328 OC v7, Reset control for GPU 24, close miner right now if you want to use default control from Catalyst
Any solution? (Rig 5xRX480 8gb, Windows 10, Catalyst 16.12.2)
My rig show only GPU0 and GPU1 temp and fan, i have 2x 7990, under win 10, already tried all from catalyst 15.12 to 17.1(used ddu), tried all sort of config command(-asm 0, -tt 75,75,75,75 -wd 0).
I'm worried because i used the command -ttli and -tstop to protect the rig, but that seems to affect only gpu0 and gpu1, already see gpu2 and gpu3 get to 100 celsius....
Already tried miner 10.0,11.0 and 11.1
Any tips?
I'm worried because i used the command -ttli and -tstop to protect the rig, but that seems to affect only gpu0 and gpu1, already see gpu2 and gpu3 get to 100 celsius....
Already tried miner 10.0,11.0 and 11.1
Any tips?
An update, i got a third 7990, and now, the program shows all fan speed and temps...go figure...
Hi friends, I'm looking to buy Rx 470, could anyone recommend the correct model?
I can recommend coinotron for Zcash, even though hashrate is smaller. PPLNS is decent, and they have PPS at 3%. worker notifications, etc. I've never really had connection problems there (like dwarf, or sometimes coinmine). Plus its not flypool, so there's that
@fr4nkthetank - I'm curious what's your problem/issue with flypool?
I use coinmine.pl - all good.
I use Flyploo 
Like it and have had no problems. Seems pretty accurate with hash rate and good payouts
Like it and have had no problems. Seems pretty accurate with hash rate and good payoutsSecond that. Never had an issue with flypool
My rig show only GPU0 and GPU1 temp and fan, i have 2x 7990, under win 10, already tried all from catalyst 15.12 to 17.1(used ddu), tried all sort of config command(-asm 0, -tt 75,75,75,75 -wd 0).
I'm worried because i used the command -ttli and -tstop to protect the rig, but that seems to affect only gpu0 and gpu1, already see gpu2 and gpu3 get to 100 celsius....
Already tried miner 10.0,11.0 and 11.1
Any tips?
I'm worried because i used the command -ttli and -tstop to protect the rig, but that seems to affect only gpu0 and gpu1, already see gpu2 and gpu3 get to 100 celsius....
Already tried miner 10.0,11.0 and 11.1
Any tips?
An update, i got a third 7990, and now, the program shows all fan speed and temps...go figure...
I can recommend coinotron for Zcash, even though hashrate is smaller. PPLNS is decent, and they have PPS at 3%. worker notifications, etc. I've never really had connection problems there (like dwarf, or sometimes coinmine). Plus its not flypool, so there's that
Dears
What is the best profitable pool now for Z-chash
What is the best profitable pool now for Z-chash
http://www.site.com.ve/mlibre/zchain.jpg
Here is your answer, because the system is based on rewards who wins the most opportunities, so I recommend https://zec.suprnova.cc, because it only has 1% of commission compared to 4% of f2pool Which although it obtains more packages has a very high commission.
P.D. You can check out at this dir: https://explorer.zcha.in/statistics/miners
Dears
What is the best profitable pool now for Z-chash
What is the best profitable pool now for Z-chash
For Z-chash? Nanoplorl porbably
http://www.site.com.ve/mlibre/Zchain%2030-01-2017.jpg
Here is your answer, because the system is based on rewards who wins the most opportunities, so I recommend https://zec.suprnova.cc, because it only has 1% of commission compared to 4% of f2pool Which although it obtains more packages has a very high commission.
Dears
What is the best profitable pool now for Z-chash
What is the best profitable pool now for Z-chash
For Z-chash? Nanoplorl porbably
Dears
What is the best profitable pool now for Z-chash
What is the best profitable pool now for Z-chash
when new version will be out?
I'm still working on new version. I rewrite everything again and it takes a bit more time than I expected. However, most of work is completed, I plan to have new version finished this week.
when new version will be out?
Thank you for understanding Claymore's !
what hash rate does the 7950 have? also how much power draw do they have?
i got rig with 2 7950 and 2 280....Hashrate 230-260 and 700w from the wall.. so maybe 150w each.
Jump to: