Hello friends,
I have 5X Sapphire nitro rx480 4gb on win 8 , the latest driver 16.12.2 , no overclock no bios mod.
When start ,all cards run at 220 h/s but after 5 min slowdown to 170-180 h/s.
I try few combinations 1395/2195 , 1306/1900 but no result.The people report 240-250 h/s for those cards.
Can you help me please with proper settings and driver version.
Thank you very much !
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 309. (Read 3839163 times)
Hi Everyone, first post in here 
I Have a question about my rigs, i've got 2 rigs of 290's and one rig that have 5GPU (3x290's and 2x290x) and this rig only works at 100% with Claymore version 7.0 with the new versions i've got warnings from my graphics driver, i allready tryed to put interface at "0" but have the same results anyone had this problem???
I Have a question about my rigs, i've got 2 rigs of 290's and one rig that have 5GPU (3x290's and 2x290x) and this rig only works at 100% with Claymore version 7.0 with the new versions i've got warnings from my graphics driver, i allready tryed to put interface at "0" but have the same results anyone had this problem???
Put on stock or underclock.
Check watts (not enough strong psu)
Check risers
Reduce the frequency or reduce the intensity.
I'm only have Stilt bios on them, not overclocked in software, the intensity already tryed to put at "0" about frequency how can i reduce this?
Im getting 277 h/s with my RX 470 8gb.
One of my 290s is doing 290 h/s but the other does 220 h/s. Will need to investigate that.
Thanks claymore.
One of my 290s is doing 290 h/s but the other does 220 h/s. Will need to investigate that.
Thanks claymore.
WOW! 290 Sols/s on a 290? Is this a ref model? What clocks are you using? I can't get more than 260 out of mine.
You should try flash your cards with Stilt BIOS.
I get 310 sol/s with ref R9 290 Stilt BIOS, 1100 core, 1450 memory.
I have 4 R9 290 Ref Models... This would be great! Could you point me in the direction of the STILT BIOS you used?
Same, I'll give it a whirl on my 290 REF. Whats the wattage per card with bios mod?
not bad
rx 480 = 250
rx 470 = 225
total power usage = 360 /w system
rx 480 = 250
rx 470 = 225
total power usage = 360 /w system
Im getting 277 h/s with my RX 470 8gb.
One of my 290s is doing 290 h/s but the other does 220 h/s. Will need to investigate that.
Thanks claymore.
One of my 290s is doing 290 h/s but the other does 220 h/s. Will need to investigate that.
Thanks claymore.
WOW! 290 Sols/s on a 290? Is this a ref model? What clocks are you using? I can't get more than 260 out of mine.
You should try flash your cards with Stilt BIOS.
I get 310 sol/s with ref R9 290 Stilt BIOS, 1100 core, 1450 memory.
I have 4 R9 290 Ref Models... This would be great! Could you point me in the direction of the STILT BIOS you used?
Hi Everyone, first post in here
I Have a question about my rigs, i've got 2 rigs of 290's and one rig that have 5GPU (3x290's and 2x290x) and this rig only works at 100% with Claymore version 7.0 with the new versions i've got warnings from my graphics driver, i allready tryed to put interface at "0" but have the same results anyone had this problem???
I Have a question about my rigs, i've got 2 rigs of 290's and one rig that have 5GPU (3x290's and 2x290x) and this rig only works at 100% with Claymore version 7.0 with the new versions i've got warnings from my graphics driver, i allready tryed to put interface at "0" but have the same results anyone had this problem???
Put on stock or underclock.
Check watts (not enough strong psu)
Check risers
Reduce the frequency or reduce the intensity.
Hi Everyone, first post in here
I Have a question about my rigs, i've got 2 rigs of 290's and one rig that have 5GPU (3x290's and 2x290x) and this rig only works at 100% with Claymore version 7.0 with the new versions i've got warnings from my graphics driver, i allready tryed to put interface at "0" but have the same results anyone had this problem???
I Have a question about my rigs, i've got 2 rigs of 290's and one rig that have 5GPU (3x290's and 2x290x) and this rig only works at 100% with Claymore version 7.0 with the new versions i've got warnings from my graphics driver, i allready tryed to put interface at "0" but have the same results anyone had this problem???
Put on stock or underclock.
Check watts (not enough strong psu)
Check risers
There is the proof - https://i.imgsafe.org/949d2c9995.jpg
Got confused with temps and wrote them the other way around but it is what it is.
GPU1 is my RX 470.
Got confused with temps and wrote them the other way around but it is what it is.
GPU1 is my RX 470.
That's why people were calling you on it as the numbers didn't make sense.
Now they do so everyone can move on. 220 h/s is quite normal.
He said the speed is 277H/s.
Yes, he got confused.. Let's move on..
Yes, my apologies. 470 has always been listed as GPU1 but 9.2 changed that.
I jumped right into it without checking any further.
My apologies for seeming hostile. Honest mistake
It's just fairly common for people to over-represent hash rates for some reason and it's never good for the community and can lead to newer members making bad decisions on hardware purchases etc.
Hi Everyone, first post in here
I Have a question about my rigs, i've got 2 rigs of 290's and one rig that have 5GPU (3x290's and 2x290x) and this rig only works at 100% with Claymore version 7.0 with the new versions i've got warnings from my graphics driver, i allready tryed to put interface at "0" but have the same results anyone had this problem???
I Have a question about my rigs, i've got 2 rigs of 290's and one rig that have 5GPU (3x290's and 2x290x) and this rig only works at 100% with Claymore version 7.0 with the new versions i've got warnings from my graphics driver, i allready tryed to put interface at "0" but have the same results anyone had this problem???
Radeon rx 470 g1 gaming 4G, ~1270/1810, timings, claymore 9.2, i8: 229 H/s average per card, +6%
same cards , but not more then 209 H/s. 1230/2000 timings from 1500 ,-i 8 , any ideas ?
Maybe slow CPU ? some celeron G series
I have Athlon FX, but I think it's not a big deal. My CPU load is very low.
Have you same model? Gaming G1?
My not works on 2000 memory, even on 1900 MHz (I have 5 cards), but works on lower timings.
And this algo like core frequency more than memory.
And are you using 9.2 version?
My 3 x 390x do only 320h/s instead of 330h/s on stock 1080 1500
What is your intensity? the memory timing will also affect the speed.
There is the proof - https://i.imgsafe.org/949d2c9995.jpg
Got confused with temps and wrote them the other way around but it is what it is.
GPU1 is my RX 470.
Got confused with temps and wrote them the other way around but it is what it is.
GPU1 is my RX 470.
That's why people were calling you on it as the numbers didn't make sense.
Now they do so everyone can move on. 220 h/s is quite normal.
He said the speed is 277H/s.
Yes, he got confused.. Let's move on..
Yes, my apologies. 470 has always been listed as GPU1 but 9.2 changed that.
I jumped right into it without checking any further.
My two XFX R9 290:
282 sol/s on stock settings
309 sol/s on 1150/1400
282 sol/s on stock settings
309 sol/s on 1150/1400
There is the proof - https://i.imgsafe.org/949d2c9995.jpg
Got confused with temps and wrote them the other way around but it is what it is.
GPU1 is my RX 470.
Got confused with temps and wrote them the other way around but it is what it is.
GPU1 is my RX 470.
That's why people were calling you on it as the numbers didn't make sense.
Now they do so everyone can move on. 220 h/s is quite normal.
He said the speed is 277H/s.
Yes, he got confused.. Let's move on..
here is the proof - https://i.imgsafe.org/949d2c9995.jpg
Got confused with temps and wrote them the other way around but it is what it is.
GPU1 is my RX 470.
Got confused with temps and wrote them the other way around but it is what it is.
GPU1 is my RX 470.
Miner has another IDs than MSI Afterburner. So hashrate for RX 470 is 220 in your case. And about 280 h/s for 290.
There is the proof - https://i.imgsafe.org/949d2c9995.jpg
Got confused with temps and wrote them the other way around but it is what it is.
GPU1 is my RX 470.
Got confused with temps and wrote them the other way around but it is what it is.
GPU1 is my RX 470.
That's why people were calling you on it as the numbers didn't make sense.
Now they do so everyone can move on. 220 h/s is quite normal.
He said the speed is 277H/s.
My 3 x 390x do only 320h/s instead of 330h/s on stock 1080 1500
There is the proof - https://i.imgsafe.org/949d2c9995.jpg
Got confused with temps and wrote them the other way around but it is what it is.
GPU1 is my RX 470.
Got confused with temps and wrote them the other way around but it is what it is.
GPU1 is my RX 470.
That's why people were calling you on it as the numbers didn't make sense.
Now they do so everyone can move on. 220 h/s is quite normal.
RX480 8gb core 1303/1950, biosmod, -i 8, -100mw
average 246 sol 150w from the wall
average 246 sol 150w from the wall
The power consumption is quite high.
Im getting 277 h/s with my RX 470 8gb.
One of my 290s is doing 290 h/s but the other does 220 h/s. Will need to investigate that.
Thanks claymore.
One of my 290s is doing 290 h/s but the other does 220 h/s. Will need to investigate that.
Thanks claymore.
280 hash on 470. Yeah, sounds likely.
Probably it is liquid nitrogen cooled while running@1500/2250.
Actually the clocks on my RX470 are 1242/2000 and temp is currently 76 degrees with 68% fan. It is a modded bios though.
Like I said, I have two 290s and only one of them does 290 sols. The clocks on that card are 1050/1250 and it is not modded. Temp is 69 and fan 64%.
The other 290 does only 220 sols. The clocks on that are 1100/1250 and its not modded. Temp and fan are the same as the other one. I'm only monitoring them remotely now so I cant say much but will look into it.
All hashrates are confirmed by the pool by the way.
i don't understand why you guys are being hostile. I will take a screenshot and show it to you. I'm not trying to prove anything.
Uh huh. You run a 470 at 280 sol but can't figure out why your 290 isn't running at even stock.
I am getting 1200 h/s on my Intel HD4000. It's modded though. How is babby made?
Not so much a personal attack as the fact that you post numbers 50% over consensus for the card with no proof on a new account. It's commonly 'not exactly reliable'.
"HERE ARE MY AMAZING NUMBERS" - 'I will take a screenshot and show it to you. I'm not trying to prove anything.'
here is the proof - https://i.imgsafe.org/949d2c9995.jpg
Got confused with temps and wrote them the other way around but it is what it is.
GPU1 is my RX 470.
Jump to: