Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 63. (Read 3839203 times)
Where is Linux version?
Hey claymore let's get them fees down a bit mate
that is my wish.
Hey claymore let's get them fees down a bit mate
Hi, guys! Can you help me with this: https://i.imgur.com/waj3Foc.jpg
ETH Claymore Dual Miner works but Zcash doesn't. I have two PCs. This is R9 Fury with 16.3.2 AMD Driver. But the other with two RX480 works very well.
ETH Claymore Dual Miner works but Zcash doesn't. I have two PCs. This is R9 Fury with 16.3.2 AMD Driver. But the other with two RX480 works very well.
I found a solution. I switched my second router and the miner run.
v12.5:
- added support for latest ZCash forks.
- improved fans management for latest drivers and Polaris cards.
- added "-mpsw" option.
- added shares-per-GPU statistics when "s" key is pressed.
- Included EthMan v3.0 which supports passwords and email notifications.
- added support for latest ZCash forks.
- improved fans management for latest drivers and Polaris cards.
- added "-mpsw" option.
- added shares-per-GPU statistics when "s" key is pressed.
- Included EthMan v3.0 which supports passwords and email notifications.
no speed improve?? come on!!
I think the speed is already very fast.
Lol, if you look at it closely, he is actually taking the popcorn out?
WTF??? 
is there any cheaper Nvidia cards we can use?
Not on claymore.
1070 pulls 420+ sol/s (depends a lot on settings and somewhat on the specific card model as usual) on EBWF, IIRC 1080 was a hair over 500 (again depends on settings).
The lower cards seem to be a little better on hash/$ but not by much when you factor in total system cost, efficiency seem to be pretty much even to a slight advantage for the higher cards based on my own testing and posted figures, again the specific card makes a noticeable difference and settings make a BIG one.
Claymore is AMD specific and always has been. AMD cards win on the mid-to-low end most of the time on hash/$ (AMD does not currently HAVE a current-generation high-end card, that's what VEGA is going to be about) but seem to lose narrowly on efficiency to NVidia, using recent miners on both sides.
v12.5:
- added support for latest ZCash forks.
- improved fans management for latest drivers and Polaris cards.
- added "-mpsw" option.
- added shares-per-GPU statistics when "s" key is pressed.
- Included EthMan v3.0 which supports passwords and email notifications.
- added support for latest ZCash forks.
- improved fans management for latest drivers and Polaris cards.
- added "-mpsw" option.
- added shares-per-GPU statistics when "s" key is pressed.
- Included EthMan v3.0 which supports passwords and email notifications.
no speed improve?? come on!!
You're an entitled motherfucker, aren't you?
You're Motherfucker go suck Claymore Dick
Actually, I think Claymore is kind of an asshole - and I actually don't use it, at least not currently. But complaining about no speed improvements in something you get for free? That's amusing.
But, you wanna talk shit, let's talk some shit.
What's even funnier than bitching about a free-to-use product? You want something that actually won't benefit you, and you're too stupid to realize it. Claymore releases a faster miner, and diff will rise by the same percentage (roughly) in MAYBE 72h - probably less. You'll make the same damn amount, but you get to see higher numbers in your miner.
I want to see pricing and performance first.
Saw a post on one of the Zen pool pages that claymore needs to be patched to mine ZEN when it starts up - but optiminer is apparently already ready, so can't tell for sure.
Perhaps you could try the elfpool "ZEN testnet" and see if it works?
v12.5:
- added support for latest ZCash forks.
- improved fans management for latest drivers and Polaris cards.
- added "-mpsw" option.
- added shares-per-GPU statistics when "s" key is pressed.
- Included EthMan v3.0 which supports passwords and email notifications.
- added support for latest ZCash forks.
- improved fans management for latest drivers and Polaris cards.
- added "-mpsw" option.
- added shares-per-GPU statistics when "s" key is pressed.
- Included EthMan v3.0 which supports passwords and email notifications.
no speed improve?? come on!!
My HD 7990 (dual gpu) only mines with the other core and completely discards the another. Can you please help me find the solution. Now i´m hashing GPU 0= 0.000H/S and GPU 1= 270-290H/S.
I´m using windows 10 with 15.12 drivers. I do not have this problem with other 7990s from my other systems. I have also uninstalled the drivers with DDU and reinstalled them twice. If you can help me with this you would do a great deal to release me from my despair. Any bit of advice helps since i can´t figure anything out at this moment.
I´m using windows 10 with 15.12 drivers. I do not have this problem with other 7990s from my other systems. I have also uninstalled the drivers with DDU and reinstalled them twice. If you can help me with this you would do a great deal to release me from my despair. Any bit of advice helps since i can´t figure anything out at this moment.
No improvements on my R9 Fury's. Ah well. 
Same here, same hashrates on the new version. What are your hashrates?
My (6) R9 Fury's are getting about 458 sol/s each for a total of 2750 sol/s. Using 16.3.2 of course.
I'm using the same drivers and getting 480H/s per GPU, those are Fury X's so it seems about right.
I checked the first page of the post and have gone back several days worth of post to see if I could find the answer but no dice.
Does anyone know if Claymore's Zcash miner is going to be able to mine Zen tonight at launch?
I have read on the Zen page that they believe it will need a patch to be able to. Just looking for confirmation.
Thanks
Does anyone know if Claymore's Zcash miner is going to be able to mine Zen tonight at launch?
I have read on the Zen page that they believe it will need a patch to be able to. Just looking for confirmation.
Thanks
ZEN has delayed their launch a week. It is now May 30th.
No improvements on my R9 Fury's. Ah well.
Same here, same hashrates on the new version. What are your hashrates?
My (6) R9 Fury's are getting about 458 sol/s each for a total of 2750 sol/s. Using 16.3.2 of course.
No improvements on my R9 Fury's. Ah well.
Same here, same hashrates on the new version. What are your hashrates?
No improvements on my R9 Fury's. Ah well.
Wow! Just after my message. What a timing 
Jump to: