= ClockTweak = win32 command line clock/voltage tweaking tool - NOW FREE! - page 16.

Clipse

hero member

Activity: 504

Merit: 502

I bought this just for the ease of adjusting mem to 300 on all cards.

However, do you know how amd gpu tool get to raise core clock higher than bios allows? I would love to use this clocktweak program to adjust more than just one cards above bios limit.

willphase

hero member

Activity: 767

Merit: 500

clocktweak doesn't let me clock my XFX HD5870 (link) above 900Mhz.

I could however overclock above 900 using the AMD tool (link), so it's not a hardware restriction, and I'm now using that tool instead... Sad

Here is my clocktweak -x

Code:

C:\bitcoin\clocktweak>clocktweak -x
===============================================================================
ClockTweak v0.7.4b - bitcoinX.com/clocktweak/
===============================================================================

Exploring up to 20 adapters:
A.#:0 r:0 ID:19237632 Name:"ATI Radeon HD 5800 Series" Active:1 GPU:0
A.#:1 r:0 ID:19237632 Name:"ATI Radeon HD 5800 Series" Active:0 GPU:0
A.#:2 r:0 ID:19237632 Name:"ATI Radeon HD 5800 Series" Active:0 GPU:0
A.#:3 r:0 ID:112797824 Name:"ATI Radeon HD 5800 Series" Active:1 GPU:1
A.#:4 r:0 ID:112797824 Name:"ATI Radeon HD 5800 Series" Active:0 GPU:1
A.#:5 r:0 ID:112797824 Name:"ATI Radeon HD 5800 Series" Active:0 GPU:1
A.#:6 r:-1 ERROR: explore_adapters: adapter 6 could not be initialized (-1)
A.#:7 r:-1 ERROR: explore_adapters: adapter 7 could not be initialized (-1)
A.#:8 r:-1 ERROR: explore_adapters: adapter 8 could not be initialized (-1)
A.#:9 r:-1 ERROR: explore_adapters: adapter 9 could not be initialized (-1)
A.#:10 r:-1 ERROR: explore_adapters: adapter 10 could not be initialized (-1)
A.#:11 r:-1 ERROR: explore_adapters: adapter 11 could not be initialized (-1)
A.#:12 r:-1 ERROR: explore_adapters: adapter 12 could not be initialized (-1)
A.#:13 r:-1 ERROR: explore_adapters: adapter 13 could not be initialized (-1)
A.#:14 r:-1 ERROR: explore_adapters: adapter 14 could not be initialized (-1)
A.#:15 r:-1 ERROR: explore_adapters: adapter 15 could not be initialized (-1)
A.#:16 r:-1 ERROR: explore_adapters: adapter 16 could not be initialized (-1)
A.#:17 r:-1 ERROR: explore_adapters: adapter 17 could not be initialized (-1)
A.#:18 r:-1 ERROR: explore_adapters: adapter 18 could not be initialized (-1)
A.#:19 r:-1 ERROR: explore_adapters: adapter 19 could not be initialized (-1)

valid adapters: [0, 1, 2, 3, 4, 5]
gpuAdapters: [0, 3]

Compatible GPUs found on these adapters:
Adapter#:0 ID:19237632 Name:"ATI Radeon HD 5800 Series" Active:1 GPU:0
Adapter#:3 ID:112797824 Name:"ATI Radeon HD 5800 Series" Active:1 GPU:1

Reading data:
Adapter#:0 Temp:69 Load:99 Fan:58 Level:2
CoreL0:950 CoreL2:950 MemL0:450 MemL2:450 mVoltL0:1163 mVoltL2:1163

Adapter#:3 Temp:75 Load:99 Fan:70 Level:2
CoreL0:910 CoreL2:910 MemL0:400 MemL2:400 mVoltL0:1163 mVoltL2:1163

Here is the error I get when trying to set above 900. Get same error for both adapters, any value above 900.

Code:

C:\bitcoin\clocktweak>clocktweak -y -a 3 -c910
===============================================================================
ClockTweak v0.7.4b - bitcoinX.com/clocktweak/
===============================================================================

Set values - starting.
Adapter #3:
setting core speed: 910 [MHz]
ERROR: write_values: core speed 910 could not be set (1): False

HTH,

W

RaTTuS

hero member

Activity: 792

Merit: 1000

Bite me

===============================================================================
ClockTweak v0.7.4b - bitcoinX.com/clocktweak/
===============================================================================

Exploring up to 20 adapters:
A.#:0 r:4 ID:114406992 Name:"ATI Radeon HD 5700 Series" Active:1 GPU:0
A.#:1 r:4 ID:114406992 Name:"ATI Radeon HD 5700 Series" Active:0 GPU:0
A.#:2 r:4 ID:114406992 Name:"ATI Radeon HD 5700 Series" Active:0 GPU:0
A.#:3 r:-1 ERROR: explore_adapters: adapter 3 could not be initialized (-1)
A.#:4 r:-1 ERROR: explore_adapters: adapter 4 could not be initialized (-1)
A.#:5 r:-1 ERROR: explore_adapters: adapter 5 could not be initialized (-1)
A.#:6 r:-1 ERROR: explore_adapters: adapter 6 could not be initialized (-1)
A.#:7 r:-1 ERROR: explore_adapters: adapter 7 could not be initialized (-1)
A.#:8 r:-1 ERROR: explore_adapters: adapter 8 could not be initialized (-1)
A.#:9 r:-1 ERROR: explore_adapters: adapter 9 could not be initialized (-1)
A.#:10 r:-1 ERROR: explore_adapters: adapter 10 could not be initialized (-1)
A.#:11 r:-1 ERROR: explore_adapters: adapter 11 could not be initialized (-1)
A.#:12 r:-1 ERROR: explore_adapters: adapter 12 could not be initialized (-1)
A.#:13 r:-1 ERROR: explore_adapters: adapter 13 could not be initialized (-1)
A.#:14 r:-1 ERROR: explore_adapters: adapter 14 could not be initialized (-1)
A.#:15 r:-1 ERROR: explore_adapters: adapter 15 could not be initialized (-1)
A.#:16 r:-1 ERROR: explore_adapters: adapter 16 could not be initialized (-1)
A.#:17 r:-1 ERROR: explore_adapters: adapter 17 could not be initialized (-1)
A.#:18 r:-1 ERROR: explore_adapters: adapter 18 could not be initialized (-1)
A.#:19 r:-1 ERROR: explore_adapters: adapter 19 could not be initialized (-1)

valid adapters: [0, 1, 2]
gpuAdapters:

Compatible GPUs found on these adapters:
Adapter#:0 ID:114406992 Name:"ATI Radeon HD 5700 Series" Active:1 GPU:0

Reading data:
Adapter#:0 Temp:69 Load:97 Fan:N.A
Level:2
CoreL0:157 CoreL2:850 MemL0:300 MemL2:1200 mVoltL0:950 mVoltL2:1200

^ a gigabyte passive radeon 5700
coming in at about 175Mh/s
currently

dishwara

legendary

Activity: 1855

Merit: 1016

I bought paying 0.2 BTC, But before even opening it Norton 360 deleted it.
Any way to get it back again?

phelix

legendary

Activity: 1708

Merit: 1020

Quote from: NetTecture on June 06, 2011, 04:34:34 PM

Quote from: phelix on June 06, 2011, 04:11:23 PM

Quote from: NetTecture on June 06, 2011, 04:01:36 PM

I sent you an email yesterday. I ordered and paid, but never managed to download - IE9 instead showed me a funny text page (interpreted your file as text).

Can you pelase make it available for download somehow else for me? Or email it to the address I told you?

My transfer was to 1BFTPHwvKSRPh4Y6rYxMKH3Lk7XSCvv2ML

I did send it to you yesterday:
Date: Sun, 05 Jun 2011 21:38:55 +0200
Subject: ClockTweak

and now once more.

also you can try to just go to the download page and reload twice - it should work then according to the guys from bitcoinservice.

Please email me the download URL then. I tried that. Your transfer got stuck again - your firewall did remove the attachment (mine does not, did set it up myself and send binaries around often .... i make software, too).

Please email the the link, then I will try again, possibly also with... chrome. Thanks.

I could send the zip to myself, so lets just say it was something in between. the link to reload would be the regular download link. please check your emails I sent you two links on my server.

NetTecture

full member

Activity: 140

Merit: 100

Quote from: phelix on June 06, 2011, 04:11:23 PM

Quote from: NetTecture on June 06, 2011, 04:01:36 PM

I sent you an email yesterday. I ordered and paid, but never managed to download - IE9 instead showed me a funny text page (interpreted your file as text).

Can you pelase make it available for download somehow else for me? Or email it to the address I told you?

My transfer was to 1BFTPHwvKSRPh4Y6rYxMKH3Lk7XSCvv2ML

I did send it to you yesterday:
Date: Sun, 05 Jun 2011 21:38:55 +0200
Subject: ClockTweak

and now once more.

also you can try to just go to the download page and reload twice - it should work then according to the guys from bitcoinservice.

Please email me the download URL then. I tried that. Your transfer got stuck again - your firewall did remove the attachment (mine does not, did set it up myself and send binaries around often .... i make software, too).

Please email the the link, then I will try again, possibly also with... chrome. Thanks.

phelix

legendary

Activity: 1708

Merit: 1020

Quote from: NetTecture on June 06, 2011, 04:01:36 PM

I sent you an email yesterday. I ordered and paid, but never managed to download - IE9 instead showed me a funny text page (interpreted your file as text).

Can you pelase make it available for download somehow else for me? Or email it to the address I told you?

My transfer was to 1BFTPHwvKSRPh4Y6rYxMKH3Lk7XSCvv2ML

I did send it to you yesterday:
Date: Sun, 05 Jun 2011 21:38:55 +0200
Subject: ClockTweak

and now once more.

also you can try to just go to the download page and reload twice - it should work then according to the guys from bitcoinservice.

phelix

legendary

Activity: 1708

Merit: 1020

Quote from: magixx on June 06, 2011, 02:55:45 PM

Can this set voltages and clocks for multiple gpu's that are not crossfired, specifically the 5830? I've had not luck with Afterburner (no voltage control), Trixx (only overclocks 1 GPU), and AMD Tray Tools (no voltage control, but sets both cards).

clocktweak works independent of crossfire. voltage control will probably be limited to voltage reduction in a handful of steps. I am trying to get the specification for the voltage regulator of the Sapphire HD 5850 Xtreme - not sure if it is the same on your card.

NetTecture

full member

Activity: 140

Merit: 100

I sent you an email yesterday. I ordered and paid, but never managed to download - IE9 instead showed me a funny text page (interpreted your file as text).

Can you pelase make it available for download somehow else for me? Or email it to the address I told you?

My transfer was to 1BFTPHwvKSRPh4Y6rYxMKH3Lk7XSCvv2ML

phelix

legendary

Activity: 1708

Merit: 1020

Quote from: Radix on June 06, 2011, 05:07:15 AM

Any chance that you'll add fan control at some point?
I'm really interested in this app for tweaking my miners, but really need fan control too

Currently using ATI Tray Control, but it's pretty average.

I am quite busy with some other stuff but it is possible. It is quite dangerous, though. If somebody frys his card I will have a bad conscience =) I'll be on holiday for week and if I find the time afterwards I will take a look at it.

I mostly use the stock automatic fan control - running too hot for you?

phelix

legendary

Activity: 1708

Merit: 1020

Quote from: RaTTuS on June 06, 2011, 04:08:35 AM

passive 5570 - not tried to tweek anything yet

edit
as I'm busy at work right now ...
this passive card gives me 56.3Mh/s stock...

thanks for the info again! some driver feature is missing in this card. I'm interested in hearing if it will work.

magixx

member

Activity: 68

Merit: 10

Can this set voltages and clocks for multiple gpu's that are not crossfired, specifically the 5830? I've had not luck with Afterburner (no voltage control), Trixx (only overclocks 1 GPU), and AMD Tray Tools (no voltage control, but sets both cards).

Radix

newbie

Activity: 26

Merit: 2

Any chance that you'll add fan control at some point?
I'm really interested in this app for tweaking my miners, but really need fan control too

Currently using ATI Tray Control, but it's pretty average.

RaTTuS

hero member

Activity: 792

Merit: 1000

Bite me

===============================================================================
ClockTweak v0.7.4b - bitcoinX.com/clocktweak/
===============================================================================

ERR: ADL API function: ADL_Workstation_GLSyncSupportedTopology_Get is missing.
Exploring up to 20 adapters:
A.#:0 r:6 ID:111148624 Name:"ASUS EAH5570 series" Active:1 GPU:0
A.#:1 r:6 ID:111148624 Name:"ASUS EAH5570 series" Active:0 GPU:0
A.#:2 r:-1 ERROR: explore_adapters: adapter 2 could not be initialized (-1)
A.#:3 r:-1 ERROR: explore_adapters: adapter 3 could not be initialized (-1)
A.#:4 r:-1 ERROR: explore_adapters: adapter 4 could not be initialized (-1)
A.#:5 r:-1 ERROR: explore_adapters: adapter 5 could not be initialized (-1)
A.#:6 r:-1 ERROR: explore_adapters: adapter 6 could not be initialized (-1)
A.#:7 r:-1 ERROR: explore_adapters: adapter 7 could not be initialized (-1)
A.#:8 r:-1 ERROR: explore_adapters: adapter 8 could not be initialized (-1)
A.#:9 r:-1 ERROR: explore_adapters: adapter 9 could not be initialized (-1)
A.#:10 r:-1 ERROR: explore_adapters: adapter 10 could not be initialized (-1)
A.#:11 r:-1 ERROR: explore_adapters: adapter 11 could not be initialized (-1)
A.#:12 r:-1 ERROR: explore_adapters: adapter 12 could not be initialized (-1)
A.#:13 r:-1 ERROR: explore_adapters: adapter 13 could not be initialized (-1)
A.#:14 r:-1 ERROR: explore_adapters: adapter 14 could not be initialized (-1)
A.#:15 r:-1 ERROR: explore_adapters: adapter 15 could not be initialized (-1)
A.#:16 r:-1 ERROR: explore_adapters: adapter 16 could not be initialized (-1)
A.#:17 r:-1 ERROR: explore_adapters: adapter 17 could not be initialized (-1)
A.#:18 r:-1 ERROR: explore_adapters: adapter 18 could not be initialized (-1)
A.#:19 r:-1 ERROR: explore_adapters: adapter 19 could not be initialized (-1)

valid adapters: [0, 1]
gpuAdapters:

Compatible GPUs found on these adapters:
Adapter#:0 ID:111148624 Name:"ASUS EAH5570 series" Active:1 GPU:0

Reading data:
Adapter#:0 Temp:40 Load: 0 Fan:N.A
Level:0
CoreL0:157 CoreL2:650 MemL0:200 MemL2:400 mVoltL0:900 mVoltL2:1100

passive 5570 - not tried to tweek anything yet

edit
as I'm busy at work right now ...
this passive card gives me 56.3Mh/s stock...

phelix

legendary

Activity: 1708

Merit: 1020

great!

yes. there will be free update patches at http://bitcoinx.com/clocktweak (see also first thread entry).

RedLine888

full member

Activity: 236

Merit: 109

thanx! great soft!

will there be free updates?

RedLine888

full member

Activity: 236

Merit: 109

Hmmmm.

I did not think it would work!

I can set the mem settings for those cards as low as 302 MHz

phelix

legendary

Activity: 1708

Merit: 1020

Quote from: hieu5189 on June 05, 2011, 04:41:18 AM

Like redline888 i'm using a 5870 giga UD version
What result could u get with this soft?
I'm going to buy it but not know how to use it
can anyone give me somme advice?

if you have no experience with command line it might be better for you to stick to msi afterburner or catalyst control center.

you will probably only able to lower the voltage, should be able to decrease mem speed quite a bit and increase core speed as high as with catalyst control center.

phelix

legendary

Activity: 1708

Merit: 1020

Quote from: RedLine888 on June 05, 2011, 01:35:09 PM

My cards are 3x GV-R587UD-1GD and one ASUS HD 5870 TOP!

It does not want to change the voltage settings on any of those my cards.

It does not want to change the mem settings on some of those Gigabyte cards.

it looks like you are running into bios limits. voltage is expected, mem hmm how low can you set it?

phelix

legendary

Activity: 1708

Merit: 1020

Quote from: NetTecture on June 05, 2011, 09:13:32 AM

Another one...

add a button that finds and adds:

Quote from: Mapatti on June 05, 2011, 09:01:44 AM

DisableULPS

Quote

Go to registry and disable Ulps:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Cl ass\{4D36E968-E325-11CE-BFC1-08002BE10318}]

and change "EnableUlps" to 0 under the 0000 and 0001 or 0003 keys.

to the registry so that batch one starts can actually also just make sure that dongles are not needed Wink

I never got my cards to work without dummy plug (XP). I think I tried this setting. It really works for you by just changing this registry setting?

this might be interesting for you: http://www.robvanderwoude.com/regedit.php

Topic: = ClockTweak = win32 command line clock/voltage tweaking tool - NOW FREE! - page 16. (Read 68096 times)