Some news.
Speed devices is lower by about 20%. All orders MetaBank plans to ship within 3 weeks. Our total order will be shipped probably no earlier than two weeks.
Subject to some changes.
Thx.
Topic: [CLOSED] ASICs group buy by pidobir - page 19. (Read 48156 times)
Hi! Some news! Devices have 5,10,15 PCB respectively for nominal 120GH, 240GH and 360 GH devices. Each PCB have 8 chips running at a frequency of 2,65 GH/s. Thus, the real hashrate will be lower by 10-12% of the stated hashrate. However, as said MetaBank, will be able to overclock. Thx!
According to preliminary information, the chips will work at full capacity. Overclock the device will not work without changing the cooling system and hardware modifications.
Can the 120Gh/s bitfury miner be overclocked?
Rumor started here suggest that maybe they will have 6 cards not 5.
https://bitcointalksearch.org/topic/m.3031831
Pidobir -
Would you able to find out if they are going to add an extra card to get to the minimum performance spec (132GH/s)?
I'll try to ask about it in the next day. However, knowing that MetaBank chips in limited quantity and rate of 3 gh/chip, most likely the 6th PCB will not be. Now we know, that those who ordered 240 or 360 gh/s have them in one case.https://bitcointalksearch.org/topic/m.3031831
Looking at the test data from their previous update, they're getting 22 GH/s per card. That's 242 GH/s with 11 cards; matches up perfectly with the double unit. Looks like us single unit guys will luck out. They'll need to use 6 cards, which is 132 GH/s 
Great work, metabank!
Great work, metabank!
Pidobir -
Would you able to find out if they are going to add an extra card to get to the minimum performance spec (132GH/s)?
Thx.
Rumor started here suggest that maybe they will have 6 cards not 5.
https://bitcointalksearch.org/topic/m.3031831
Pidobir -
Would you able to find out if they are going to add an extra card to get to the minimum performance spec (132GH/s)?
https://bitcointalksearch.org/topic/m.3031831
Looking at the test data from their previous update, they're getting 22 GH/s per card. That's 242 GH/s with 11 cards; matches up perfectly with the double unit. Looks like us single unit guys will luck out. They'll need to use 6 cards, which is 132 GH/s
Great work, metabank!
Great work, metabank!
Pidobir -
Would you able to find out if they are going to add an extra card to get to the minimum performance spec (132GH/s)?
Thanks for the update, but there was no news by MetaBank. In a personal call to me it was not possible to know what will be the final electricity consumption. The only thing I learned was that we could take the device to the hosting 4U enclosure with 360 gh/s. Place on a 3 kw/h ready. All electrical cables, patch cords and switches are available. At the moment I do not see problems for the hosting setup. All will pass quickly within 1 day after receiving. Thx.
Great! Thank you.
From the Russian thread: testing and shipping will start in the first week of September, for sure. Metabank is buying back orders for 4k$ per device!
P.S. I think it's time for pidobir to get ready with hosting setup: space, power, networking, etc.
Thanks for the update, but there was no news by MetaBank. In a personal call to me it was not possible to know what will be the final electricity consumption. The only thing I learned was that we could take the device to the hosting 4U enclosure with 360 gh/s. Place on a 3 kw/h ready. All electrical cables, patch cords and switches are available. At the moment I do not see problems for the hosting setup. All will pass quickly within 1 day after receiving. Thx. P.S. I think it's time for pidobir to get ready with hosting setup: space, power, networking, etc.
From the Russian thread: testing and shipping will start in the first week of September, for sure. Metabank is buying back orders for 4k$ per device!
P.S. I think it's time for pidobir to get ready with hosting setup: space, power, networking, etc.
P.S. I think it's time for pidobir to get ready with hosting setup: space, power, networking, etc.
Hello, are there any news?
Thanks for the update.
According to this post:
https://bitcointalksearch.org/topic/m.2954355
Dimensions might be close to 12x23x29 in centimeters.
No mention of the weight yet, but I imagine they will have some heat sinks on them.
I guess it is too early to get shipping cost estimates.
https://bitcointalksearch.org/topic/m.2954355
Dimensions might be close to 12x23x29 in centimeters.
No mention of the weight yet, but I imagine they will have some heat sinks on them.
I guess it is too early to get shipping cost estimates.
Hi! At this moment we have the following information. This week is making PCB with all the elemental base. From Wednesday (28 August) on these boards will be installed by hand all the connectors and will be assembled devices in case. Approximately a week later (5 September), begins shipping devices to me.
where did you get this info from? russian thread? Any information on production capability? (units per day or week)
thanks for the updates though
Yes, it's from the russian thread. They say 1400 PCBs will be received next Tuesday, which are the whole 1st batch. Then they just have to assemble the devices (case, power supply, connectors).
Hi! At this moment we have the following information. This week is making PCB with all the elemental base. From Wednesday (28 August) on these boards will be installed by hand all the connectors and will be assembled devices in case. Approximately a week later (5 September), begins shipping devices to me.
where did you get this info from? russian thread? Any information on production capability? (units per day or week)
thanks for the updates though
Hi! At this moment we have the following information. This week is making PCB with all the elemental base. From Wednesday (28 August) on these boards will be installed by hand all the connectors and will be assembled devices in case. Approximately a week later (5 September), begins shipping devices to me.
I am selling 3 full units here https://bitcointalksearch.org/topic/auction-3-x-120-ghs-bitfury-metabank-pre-orders-278089
In case someone is freaking out about the recent difficulty rises and want to sell, I'm in the market for shares.
PM me with your price and number of shares you'd like to sell.
.b
PM me with your price and number of shares you'd like to sell.
.b
I like the white PCB, very slick!
And the little baby asic chips.. So cute.. just want to pinch their cheeks
Jump to: