Pages:
Author

Topic: [Closed]Avalon Chips - 0.081 BTC (Global+Escrow)-BATCH2 SECURED - page 60. (Read 100377 times)

full member
Activity: 238
Merit: 100
Thank very much John (John K.). Then the price 0.079 include the scrow fee


Yes, from what I see here.  Smiley
Okay, apparently I was wrong.  Undecided
Huh? Do we need to pay more?


Hello all,
In short, yes. I am aware that it's the worst practice ever (to ask, recalculate and ask for more), so it is not mandatory. All of you, who have paid for the chips are not forced in any way to pay extra for the chips. I'll get that money out of my pocket, if needed, because it was my mistake.
I practically ommitted 0.002 btc for every chip.
I have changed the price of the chips in the thread title too, so at least part of John's commission fee will be recovered.

I'm truly sorry, i didn't want to ask for much, but apparently i wasn't asking for enough.
Steve
newbie
Activity: 56
Merit: 0
Thank very much John (John K.). Then the price 0.079 include the scrow fee


Yes, from what I see here.  Smiley
Okay, apparently I was wrong.  Undecided
Huh? Do we need to pay more?
newbie
Activity: 14
Merit: 0
thanks for answering one part of my post, but really, the other parts were more pressing, as I can risk joining for a few chips, but I want to know if I am supposed to make a unit, or if that is in hand, and I just get a completed unit?
legendary
Activity: 1288
Merit: 1227
Away on an extended break
Thank very much John (John K.). Then the price 0.079 include the scrow fee


Yes, from what I see here.  Smiley
Okay, apparently I was wrong.  Undecided
full member
Activity: 141
Merit: 100
Well, I'm in for 64 chips.
legendary
Activity: 1288
Merit: 1227
Away on an extended break
Thank very much John (John K.). Then the price 0.079 include the scrow fee


Yes, from what I see here.  Smiley
member
Activity: 65
Merit: 10
RVelasco mi nuevo usuario
Thank very much John (John K.). Then the price 0.079 include the scrow fee
legendary
Activity: 1288
Merit: 1227
Away on an extended break
member
Activity: 65
Merit: 10
RVelasco mi nuevo usuario
newbie
Activity: 14
Merit: 0
need some clarification.

so as far as I understand, you are planing to make a complete unit, then ship them. are we supposed to fill the chip order, then at a later date pay more to get it placed into a device that you construct? or is it only if we want the chips to make a device ourselves?

also, you say 10'000, but your orders page says: Reserved: 4000, Remaining: 2412

how much would the bigest device you have planed cost in total (euros) with chips? from what I have read it's a 16 chip design?

so I pay ecsrow to John K and then when you pay order it goes to avalon, then I wait, 10'000 get delivered to you, and you don't run away with them, make units, and send them out? does seem risky.

I am thinking about it, I do like the idea of getting the chips out of the hands of slow shady companies and knowing what is going on in a more transparent way, but I do have a lot of questions.
hero member
Activity: 728
Merit: 500
marto74;10;0.79;12DNdacCtUZ99qcP74FwchaCPzeDL9Voff
full member
Activity: 238
Merit: 100
i have NO IDEA how to name it Smiley suggestions?
hydrahashing  Wink
Hehehe, sounds good Smiley thx
yxt
legendary
Activity: 3528
Merit: 1116
i have NO IDEA how to name it Smiley suggestions?
hydrahashing  Wink
full member
Activity: 238
Merit: 100
I'm interested in ordering about 100 chips, depends on how many chips fit on pcb.
I'm from nearby country, I can also offer hosting.
I can offer help with administration and monitoring (I'm software developer).

Szia,
For now, we can fit 16 chips on a Klondike PCB. As soon as i have quotation for the 80 chip design, i will make the decision to go ahead or not and to offer the 80 chip design too. Thanks for the offers, i will contact you if needed.

Steve
newbie
Activity: 10
Merit: 0
I'm interested in ordering about 100 chips, depends on how many chips fit on pcb.
I'm from nearby country, I can also offer hosting.
I can offer help with administration and monitoring (I'm software developer).
sr. member
Activity: 319
Merit: 250
10 more for me :-)
full member
Activity: 238
Merit: 100
Furthermore, I have this factory in my town - http://www.set.bg/index.php?lang=en

They offer PCB production and providing and soldering the smaller elements over the PCB, I can contact them and ask for a price. But for me to contact them, I have to have the PCB design along with the list of the smaller elements, which will be on the board.

Do we have such schematics?
PM sent!
full member
Activity: 238
Merit: 100
No problem, I thought you missed my PM.
So I'm in with 1000 chips, will arrange payment as my coins are at mtgox... will send payment tomorrow, I guess.

Sure, no problem.


hacko.bg; 1000; 79; 1L1yVgod8mAhBqQNY1t6mjz9F1RyufDiMd
Thank you! Order confirmed
full member
Activity: 238
Merit: 100
How many chips do you have left?  If I read this right you will be able to make K16 PCB?  If you fall short of group buy purchase do you plan to buy large quantity for yourself to shorten wait time?
Hi,
Currently I have 6880 chips left. Yes, I will be able to do the Klondike16 and I'm currently in discussions for the 80 chip Avalon card and the rest of the modules needed. Yes, i we fall short until the enf of May, i will try to arrange something to be able to buy chips. I have multiple ideas on that too.

Regards,
Steve
full member
Activity: 155
Merit: 100
You can send them Avalon ref design PCB - https://github.com/BitSyncom Smiley
Pages:
Jump to: