Topic: CoinTerra Engineering Update: TerraMiner IV Hashing Live - page 3. (Read 5837 times)
how many are in batch 1? 500 units?
The address used with Eligius was 1CTtm4iiwqt35Rgew1DQW6Yo3 as far as I could see. That's not a complete address. The rest wouldn't fit in the window. I looked on Eligius's Contributors page (http://eligius.st/~wizkid057/newstats/topcontributors.php) and couldn't find that, so I'm guessing they shut down the miner (or pointed it at a different pool) at least 3 hours ago.
Also, here's a working version of the Youtube link they gave: http://www.youtube.com/watch?v=OS0HOgd7AmI
Also, here's a working version of the Youtube link they gave: http://www.youtube.com/watch?v=OS0HOgd7AmI
Congrats! Any info about power usage?
More great news!!! Very very close to their goals!
Cool! Anyone want to sell their early pre-order at cost? 
Nah, I didn't think so.
Nah, I didn't think so.
Anyone got a link to the mining stats? I can't figure it out from the screenshot.
Congrats! Pretty cool to see.
DATELINE: 1/14/2014 AUSTIN, TX
In our last update we showed an engineering test board with a single die on one GoldStrike I ASIC hooked up to a bench power supply, controlled by two laptops. Today, for our second update of 2014 we are excited to share the progress that our engineers have made in the past week, and it’s a big step indeed. For the first time we are able to demonstrate a standalone TerraMiner IV engineering prototype fully populated with four GoldStrike I chips, the BeagleBone Black controller board, CoolIt liquid cooling system, fans and Power-One power supplies – in other words, a real built-up TerraMiner IV!
The engineering refinements and improvements each day have been encouraging, and earlier today we fired this unit up and it has been hashing at approximately 1.6TH/s on the Eligius mining pool. During a break, we shot this short video: http://youtu.be/OS0HOgd7AmI
At 1.62TH/s we have hit a little over 80% of our performance target. We hope you’ll appreciate that our engineers have been making continuous tweaks and refinements each day to improve the power efficiencies on the board to increase performance.
As we enter the final stages of testing and tuning needed before we start shipping, we’ll be sure to report back with any news and information. All of the components are in hand for the first batch of hardware and we’re awaiting the go-ahead from the engineering team before we push the button and start full production.
SEE FULL POST HERE: http://cointerra.com/engineering-updates-terraminer-iv-hashing-live/
**Edit: Fixed broken video link.
**Edit: Formatting.
In our last update we showed an engineering test board with a single die on one GoldStrike I ASIC hooked up to a bench power supply, controlled by two laptops. Today, for our second update of 2014 we are excited to share the progress that our engineers have made in the past week, and it’s a big step indeed. For the first time we are able to demonstrate a standalone TerraMiner IV engineering prototype fully populated with four GoldStrike I chips, the BeagleBone Black controller board, CoolIt liquid cooling system, fans and Power-One power supplies – in other words, a real built-up TerraMiner IV!
A real, working TerraMiner IV makes its world debut!
A rear view of the TerraMiner IV on a (slightly) messy workbench.
The engineering refinements and improvements each day have been encouraging, and earlier today we fired this unit up and it has been hashing at approximately 1.6TH/s on the Eligius mining pool. During a break, we shot this short video: http://youtu.be/OS0HOgd7AmI
The TerraMiner Control Panel is on the left and the output from CGMiner is on the right. No, this wasn’t from the future – the Eligius time zone is set to European time.
At 1.62TH/s we have hit a little over 80% of our performance target. We hope you’ll appreciate that our engineers have been making continuous tweaks and refinements each day to improve the power efficiencies on the board to increase performance.
As we enter the final stages of testing and tuning needed before we start shipping, we’ll be sure to report back with any news and information. All of the components are in hand for the first batch of hardware and we’re awaiting the go-ahead from the engineering team before we push the button and start full production.
SEE FULL POST HERE: http://cointerra.com/engineering-updates-terraminer-iv-hashing-live/
**Edit: Fixed broken video link.
**Edit: Formatting.
Jump to: