That case is a NZXT S340
Dimensions 200mm x 474mm x 432mm
No way to fit a R4 in there.
Antminer R4 is already silence as it is, so I'm wondering why you have to have a ATX case for it?
Topic: Computer tower case that will fit the R4?? - page 2. (Read 1325 times)
Just make sure that you put the R4 in there horizontally.
If you put it vertically, you may have a problem with the temperatures and the fan is probably not made to last so well in the vertical position. Too much force for the bearings etc.
If you put it vertically, you may have a problem with the temperatures and the fan is probably not made to last so well in the vertical position. Too much force for the bearings etc.
I'm looking to make it look like a pc 
Are you able tot ake the hdd racks etc out of that one? essentially make it a but open box?
I see, it would be a great mining case Are you able tot ake the hdd racks etc out of that one? essentially make it a but open box?
Yes, you could completely remove the hdd racks in order to pave the way for larger equipment. Here's a picture I just took from the manual (hope it would be clear enough): https://i.imgur.com/3Re3QIx.jpg
You can't make it a complete open box since not all the parts are removable. Some parts could be rotated though.
Just to give you another option with more space and fans, you could look at the "Cooler Master Cosmos II - Ultra Tower". I have this case myself and you could literally fit anything inside of it since you could disassemble some parts (good for some large equipment's, without the need of cutting any piece down). It's a bit bigger than what you chose in the above post. Also it might be a bit pricey but it's well worth the price, if your going to use it for the right thing.
Link: http://www.newegg.com/Product/Product.aspx?Item=9SIA6ZP3K29949&cm_re=cooler_master_cosmo_II-_-11-119-252-_-Product
Review: https://youtu.be/cuP9XMIjT6A
Why don't you just build a case using some wooden boards (just make the appropriate holes for the fans and attach the wooden boards). You could also paint it so it would look better and at the same time, saves you a lot of money (should take few hrs to make).
Link: http://www.newegg.com/Product/Product.aspx?Item=9SIA6ZP3K29949&cm_re=cooler_master_cosmo_II-_-11-119-252-_-Product
Review: https://youtu.be/cuP9XMIjT6A
Why don't you just build a case using some wooden boards (just make the appropriate holes for the fans and attach the wooden boards). You could also paint it so it would look better and at the same time, saves you a lot of money (should take few hrs to make).
I'm looking to make it look like a pc
Are you able tot ake the hdd racks etc out of that one? essentially make it a but open box?
Just to give you another option with more space and fans, you could look at the "Cooler Master Cosmos II - Ultra Tower". I have this case myself and you could literally fit anything inside of it since you could disassemble some parts (good for some large equipment's, without the need of cutting any piece down). It's a bit bigger than what you chose in the above post. Also it might be a bit pricey but it's well worth the price, if your going to use it for the right thing.
Link: http://www.newegg.com/Product/Product.aspx?Item=9SIA6ZP3K29949&cm_re=cooler_master_cosmo_II-_-11-119-252-_-Product
Review: https://youtu.be/cuP9XMIjT6A
Why don't you just build a case using some wooden boards (just make the appropriate holes for the fans and attach the wooden boards). You could also paint it so it would look better and at the same time, saves you a lot of money (should take few hrs to make).
Link: http://www.newegg.com/Product/Product.aspx?Item=9SIA6ZP3K29949&cm_re=cooler_master_cosmo_II-_-11-119-252-_-Product
Review: https://youtu.be/cuP9XMIjT6A
Why don't you just build a case using some wooden boards (just make the appropriate holes for the fans and attach the wooden boards). You could also paint it so it would look better and at the same time, saves you a lot of money (should take few hrs to make).
found this
http://www.newegg.ca/Product/Product.aspx?Item=N82E16811133299
but think I would need to cut out that lower divider. hmm could fit two r4 lol
http://www.newegg.ca/Product/Product.aspx?Item=N82E16811133299
but think I would need to cut out that lower divider. hmm could fit two r4 lol
Maybe, but fig 4 on this one shows metallic hard drive bays that mess up the space.
found this
http://www.newegg.ca/Product/Product.aspx?Item=N82E16811133299
but think I would need to cut out that lower divider. hmm could fit two r4 lol
http://www.newegg.ca/Product/Product.aspx?Item=N82E16811133299
but think I would need to cut out that lower divider. hmm could fit two r4 lol
that rosewill black looks like it may work, I think I'll wait to order until boxing day though haha
Thanks
Ravel that looks like it may be even better!!
Thanks
Ravel that looks like it may be even better!!
Maybe this one (if put in vertically or put case on the side):
https://www.amazon.com/Corsair-Carbide-Clear-Inverse-Tower/dp/B016IAM7D8
Dimensions (L x W x H): 454 x 260 x 535mm
or, maybe this:
https://www.amazon.com/dp/B005ZUZD2K
(for this, not sure as it is in inches)
same on newegg:
http://www.newegg.com/Product/Product.aspx?Item=9SIA0724J90356
or
http://www.newegg.com/Product/Product.aspx?Item=N82E16811147157
not sure why the price difference
R4 (B3,4) dimensions are:
515mm (L) x 100mm (W) x 222mm (H)
https://www.amazon.com/Corsair-Carbide-Clear-Inverse-Tower/dp/B016IAM7D8
Dimensions (L x W x H): 454 x 260 x 535mm
or, maybe this:
https://www.amazon.com/dp/B005ZUZD2K
(for this, not sure as it is in inches)
same on newegg:
http://www.newegg.com/Product/Product.aspx?Item=9SIA0724J90356
or
http://www.newegg.com/Product/Product.aspx?Item=N82E16811147157
not sure why the price difference
R4 (B3,4) dimensions are:
515mm (L) x 100mm (W) x 222mm (H)
To keep it discreet i am trying to find a tall tower that will hold the r4?
Anyone happen to know?
Prefer lots of venting and fans. Sonfar all the ones i found are just a bit to small.
Newegg prefered.
Thanks.
Shawn
Anyone happen to know?
Prefer lots of venting and fans. Sonfar all the ones i found are just a bit to small.
Newegg prefered.
Thanks.
Shawn
Jump to: