I used my CPU Intel core i3 to mining AEON and I mine in my office so I didn't pay the electricity so I can got some profit with long time mining.
Nice move! Just like having everything free for you to use. However, so far, what has it been like cause from the look of things, I am not sure CPUs can really give you something much unless you are just going to be sticking with the coin for just the value later on which seems nice too since you are apparently doing all the operation for free. 
Topic: CPU mining 2017? - page 16. (Read 151064 times)
I have 434h/s with Ryzen 1700x @ stock on xmr
I used my CPU Intel core i3 to mining AEON and I mine in my office so I didn't pay the electricity so I can got some profit with long time mining.
how many core you use??
and whats your hashrate?
Don't go with his opinion you will not be able to get the profit atleast you need to bear the electricity cost and your computer will hangs up when you using all the core for mining. If your pc GPU enabled also that will not be good to make profit and all.
Even for altcoin mining also GPU mining will be good not a CPU mining.
lol
good cpu is same profitable than gpu and WTF would the computer hang ?? it s because you not smart enough
you can use all the available core, just need to run the app at cpu idle or at lease lower than normal priority
but on amd 8 core 7 thread get same speed than 8 same for my 6 core 5 is fine too (little less than 6)
and 2 x fx8300 does the same speed than an rx470 (claymore 9.7) but little more power
but for other coin is other settings but avarage 4 core
I used my CPU Intel core i3 to mining AEON and I mine in my office so I didn't pay the electricity so I can got some profit with long time mining.
how many core you use??
and whats your hashrate?
Don't go with his opinion you will not be able to get the profit atleast you need to bear the electricity cost and your computer will hangs up when you using all the core for mining. If your pc GPU enabled also that will not be good to make profit and all.
Even for altcoin mining also GPU mining will be good not a CPU mining.
lol
good cpu is same profitable than gpu and WTF would the computer hang ?? it s because you not smart enough
you can use all the available core, just need to run the app at cpu idle or at lease lower than normal priority
but on amd 8 core 7 thread get same speed than 8 same for my 6 core 5 is fine too (little less than 6)
and 2 x fx8300 does the same speed than an rx470 (claymore 9.7) but little more power
Average desktop i7 does 300h/s on cryptonight and consumes 50 watts max.
Whattomine average last 24h says $0.47/ day.
Whattomine average last 24h says $0.47/ day.
it's XMR profitable till now?
I used my CPU Intel core i3 to mining AEON and I mine in my office so I didn't pay the electricity so I can got some profit with long time mining.
how many core you use??
and whats your hashrate?
Don't go with his opinion you will not be able to get the profit atleast you need to bear the electricity cost and your computer will hangs up when you using all the core for mining. If your pc GPU enabled also that will not be good to make profit and all.
Even for altcoin mining also GPU mining will be good not a CPU mining.
I used my CPU Intel core i3 to mining AEON and I mine in my office so I didn't pay the electricity so I can got some profit with long time mining.
how many core you use??
and whats your hashrate?
I used my CPU Intel core i3 to mining AEON and I mine in my office so I didn't pay the electricity so I can got some profit with long time mining.
I am buying Xeon X5660 CPUs for my refurb HP Z400 machines (I use these as a base for my miners)... they have a pretty nice hash-rate for about 20 bucks per CPU on E-Bay.
Currently I am doing Intense Coin on most of my CPUs -- from which I don't know what return I am getting yet -- but also m7m (MAGI) seems promising... should be able to pay off the X5660 CPUs in 30-60 days based on the ZPOOL profit predictions for m7m so I have pushed a few of my CPUs over to it.
Currently I am doing Intense Coin on most of my CPUs -- from which I don't know what return I am getting yet -- but also m7m (MAGI) seems promising... should be able to pay off the X5660 CPUs in 30-60 days based on the ZPOOL profit predictions for m7m so I have pushed a few of my CPUs over to it.
I think that the cpu are very expensive in front of the h/s that they have
Can you guys share if what script are good to mine using CPU and intel GPU i have intel express gpu in my laptop and i would like to use while im browsing here because i am online 14 hours a day while doing other activity online..
Hope someone can gives me because some of my friends also wanted to mine with their pc and i would like to teach him for cpu mining..
i have already a small mining rig and use nicehash but only support amd and Nvidia..
Hope someone can gives me because some of my friends also wanted to mine with their pc and i would like to teach him for cpu mining..
i have already a small mining rig and use nicehash but only support amd and Nvidia..
I tried CPU mining (XMR and BCN) for the past 6 hours on minergate. all i can say is, not worth the time and waste of electricity. Im using my Own Personal PC, AMD APU A8 7600 and im only getting 40 - 44 H/s using 50% load on my CPU. i dont know why my Built in GPU R7 is not recognized by minergate or my PC is not really design for CPU mining.
im using that same pc you have an hp pavillion with the spectre r7 graphics 2809mb of gpu cores. on board.
i mine bitsend. straight to cryptopia
cpuminer-sse42.exe -o stratum+tcp://yiimp.ccminer.org:3739 -a xevan -u iEqZ9gs5GXFSN5EpMJzJZ8ExwqfbF2R86z -p x -t 4
pause
and i mine. gpu dnr on hashbag and i get 1.5 mh on that coin i mine it ot cryptopia aswell. every other day i have about 15k sat
config for sgminer for denarius
"pools": [
{
"name":"hashbag",
"priority": "0",
"url": "http://pool.hashbag.cc:8688",
"user": "DCN2ZGg9CTzdgJtS34zm9knu3yfLZm7sMD",
"pass": "DNR2HASHBAG",
"profile": "tribus"
}
],
"profiles": [
{
"name": "tribus",
"algorithm": "tribus",
"shaders": "1792",
"lookup-gap" : "4",
"intensity": "19"
}
],
"kernel-path": "kernel",
"default-profile": "tribus",
"failover-only": true,
"failover-switch-delay": "60",
"gpu-dyninterval": "11",
"queue": "2",
"quiet": false,
"expiry": "90",
"scan-time": "20"
}
Try Nicehash or Winminer
https://bitcointalksearch.org/topic/winminer-v1126a-auto-switch-windows-app-for-multi-miner-optimization-2004875
I sometimes chuck my cpu on nicehash, its a i7 4790k OC to 4.7 with a AIO cooler and get like 220h/s then with my 780ti which is 420h/s ish :/ but yes its on cryptonight but im not sure of the ins and outs, I just boot it up and let it do its thing for me 
I tried CPU mining (XMR and BCN) for the past 6 hours on minergate. all i can say is, not worth the time and waste of electricity. Im using my Own Personal PC, AMD APU A8 7600 and im only getting 40 - 44 H/s using 50% load on my CPU. i dont know why my Built in GPU R7 is not recognized by minergate or my PC is not really design for CPU mining.
im using that same pc you have an hp pavillion with the spectre r7 graphics 2809mb of gpu cores. on board.
i mine bitsend. straight to cryptopia
cpuminer-sse42.exe -o stratum+tcp://yiimp.ccminer.org:3739 -a xevan -u iEqZ9gs5GXFSN5EpMJzJZ8ExwqfbF2R86z -p x -t 4
pause
and i mine. gpu dnr on hashbag and i get 1.5 mh on that coin i mine it ot cryptopia aswell. every other day i have about 15k sat
config for sgminer for denarius
"pools": [
{
"name":"hashbag",
"priority": "0",
"url": "http://pool.hashbag.cc:8688",
"user": "DCN2ZGg9CTzdgJtS34zm9knu3yfLZm7sMD",
"pass": "DNR2HASHBAG",
"profile": "tribus"
}
],
"profiles": [
{
"name": "tribus",
"algorithm": "tribus",
"shaders": "1792",
"lookup-gap" : "4",
"intensity": "19"
}
],
"kernel-path": "kernel",
"default-profile": "tribus",
"failover-only": true,
"failover-switch-delay": "60",
"gpu-dyninterval": "11",
"queue": "2",
"quiet": false,
"expiry": "90",
"scan-time": "20"
}
FX-6300:
1) OC to 4.2GHz (when max. boost in stock was is 4.1GHz)
2) large pages
3) no_prefetch - true
~300h/s (stable 295-297, sometimes going crazy 320
) on cryptonight.xmr via NiceHashMiner Legacy v1.8.1.1
just search conf file in nicehashminer folder and edit it
P.S. sry for my bad english
1) OC to 4.2GHz (when max. boost in stock was is 4.1GHz)
2) large pages
3) no_prefetch - true
~300h/s (stable 295-297, sometimes going crazy 320
) on cryptonight.xmr via NiceHashMiner Legacy v1.8.1.1just search conf file in nicehashminer folder and edit it
P.S. sry for my bad english
Not bad to get 300h/s for your old amd cpu. I have tried to get dual xeon x5650 to mine cryptonight, but I got max 200h/s only, this cpu is not cryptonight friendly.
not known to all coins are profitable.
Hi guys, i have Athlon II 220 in my rig, what coins can i mine on this CPU?
All CryptoNight based coins. Aeon, Sumo, Monero, Iridium, Charnacoin.
And then also ZEC/zcash.
Hi guys, i have Athlon II 220 in my rig, what coins can i mine on this CPU?
Does someone has more info about sumocoin?
Yes, you can mine SUMO on CPU as well. Look at my post above what hashrate I get with those CPUs.
It's the same algo(CryptoNight) as Monero.
Jump to: