Topic: CRAVE: Revival - page 46. (Read 54975 times)

Hi Cravers,

Many bounties have been sent today for Facebook,Twitter and translation.

http://cryptoblock.xyz:30002/tx/1384797027db26eefadf61443f93a8b888f4f2bd8c3c6505d1319a8120e1b05d

http://cryptoblock.xyz:30002/tx/31ef71bcf9381090baa4dfeaa7e9d6550b1a52ce3cfa443b963a3c3cdde112c7

http://cryptoblock.xyz:30002/tx/3bb12ab482086f72e05a7ee03edf960c3d81baa7fda990e7e9dfdbf1041a5d2e

http://cryptoblock.xyz:30002/tx/8aeb6c59f522fa866af9d40ec71800802a8f8256183a74139cadc1a6ffb356e6


THE BOUNTY SYSTEM IS NOW OVER FROM MY SIDE

What do you mean? You can't mine? You can't PoS or you can't make masternode?

actually this coin has a good rate on exchange but I cant mine it, I dont know why

Masternode will be profitable. You will get about 3 coins in a day.

Its pretty random, for 1 masternode you can expect maybe 2-3 crave a day

The synchronization of the wallet has just ended. How many coins will be extracted if 500 coins are in the wallet, or master node be created?

Around 130 masternodes running. Almost 1.3 million coins, but some are probably lost in the limbo.

WOW! Crave coin is live! I remember how it was cool to follow the first developer, it was a cool project. I really wanted to raise the master node, but it was very expensive for me. After so much time I can raise the node How many active wallets now and coins? Is there a Russian community here?

What's wrong with Cryptopia??It works perfectly for everybody.
https://www.cryptopia.co.nz/Exchange/?market=CRAVE_BTC

Iam will not recomended for yobit
i think you must trade on coinexchange

I have created whitepaper wallet generator.

Ok, just to be sure, I have no experience at all with VPS, I know amazon has a 12 month free offer. I can follow the Vps masternode tutorial with the amzon offer even without being on linux on my PC ?

If you follow the step-by-step guide closely, it's really not that bad!  Just set a few up the other day.

If you want to try it, if you encounter any problems, feel free to ask.  Or join the slack channel.  Could read through some conversations we had today regarding masternode setup - might be helpful.

Well I am interested in the masternode, but it does not seem like the easiest thing to do.

I didn't understand if we don't trade on yobit, why developers deal with yobit. Anyway, is there any bounty campaign ? I wish success to all team. Be safe and work hard.

To-Do List (in no particular order)

Near Future:

• Add Bounties to Thread
• New Roadmap
• Vision/Goals/Future
• New Slack Channel
• Form CRAVE Subreddit
• Announce Team, Positions Needed, etc.
• Decision on Logo, Branding

Future:

• Website Redesign
• Larger Exchange Listing

Please feel free to add things to this list, check off those completed, etc.
This list is my opinion of what I think we should work on to get completed, not fact.

Everybody should join us on slack as there's the news and information about everything around Crave project.Here's silent most of times.

https://join.slack.com/cravecommunity/shared_invite/MTczMTI3MTU2MzcyLTE0OTI4NzQ1ODEtODI1ZDNkYzM4ZQ

Yeah, we have been trying to open a dialogue with yobit for months, to no avail.  They are just ignoring this issue.  If anyone has any contacts at yobit, please feel free to reach out to them - that would be awesome

Multiple Masternodes setup Guide

Step-by-step guide for starting multiple masternodes (3 masternodes in this example)

Requirements

     - crave wallet running on your local computer with at least 500 cravecoins for every masternode
     - white static IP with open ports for masternodes

STEP 1 : Prepairing masternodes

    1 - Choose the place where you will hold you masternodes dirs (you need 1,5Gb free space for every masternode)
    2 - Create folder "CraveMN1" there
    3 - Copy file "crave-qt.exe" in folder "CraveMN1"
    4 - Create in folder "CraveMN1" new folder "data"
    5 - Copy file "blk0001.dat" and folder "txleveldb" in created folder "data"
    6 - Rename "crave-qt.exe" to the "crave-mn1.exe"
    7 - Press Win+R and type "cmd" and press Enter
    8 - Now type there:

   
    9 - Move file "startmn1.cmd" from Desktop to the "CraveMN1" folder
   10 - Repeat the process from step 2 for each masternode you want to created, with changing mn1 to mn2, mn3
   11 - Run startmn1.cmd, startmn2.cmd and startmn3.cmd, wait for complete loading wallets and complete syncing with blockchain
   12 - Now you can exit from each running masternode wallets

STEP 2 : Prepairing controller wallet

    1 - Open your main wallet where you have your coins
    2 - Go to Recieve tab
    3 - Press button "New address" and enter "Masternode 1" in Label (do not check "Stealth address")
    4 - Send to this address exactly 500 CRAVE
    5 - Wait for 1 confirmation of transaction and go to the Debug console
    6 - Run command "masternode genkey" and write down generated key (this is your masternode private key)
    7 - Run command "masternode outputs" and write down hexnumbers (this is your masternode tx) and digit after ":" (this is tx index)
    8 - Go to Masternodes tab and switch to the "My Masternodes"
    9 - Press button "Create"
   10 - Enter "Alias" - "MN1" (do not use spaces and special charatcers)
   11 - Enter "Address" - "YOUREXTERNALIP:PORT" (your external white ip and port for masternode)
   12 - Enter "Privkey" - masternode private key you generated with "masternode genkey"
   13 - Enter "TxHash" - masternode tx from "masternode outputs" command
   14 - Enter "Output Index" - tx index from "masternode outputs" command
   15 - Now you can press "Ok"
   16 - Repeat process from step 2 for MN2 and MN3. With renaming MN1 to MN2 and MN3 and changing port

#################################################################################################################################################

When you get to step 7 "masternode outputs" in second time you will see 2 lines with txhash and index. You must choose the new line with txhash.
When you get to step 7 "masternode outputs" in third time you will see 3 lines with txhash and index. You must choose the new line with txhash.

#################################################################################################################################################

   17 - Press "Update" and you will see all three masternodes in list with status "Not in the masternode list."
   
#################################################################################################################################################

Steps 8-15 creates masternode.conf. You can skip this steps and create it by yourself.
It have format:
One line - one masternode config

#################################################################################################################################################

STEP 3 : Configuring masternodes

    1 - Go to "CraveMN1/data" folder
    2 - Open "crave.conf" in Notepad
    3 - Type there:

       
    4 - Replace PORT with port for your Masternode 1, IP:PORT with your external white ip and the same port for you Masternode 1
    5 - Replace PRIVKEY with masternode private key you generated with "masternode genkey" in controller wallet for Masternode 1
    6 - Save it and repeat process for Masternode 2 and Masternode 3.

STEP 4 : Starting masternodes

    1 - Now you can start all your masternodes with "startmn1.cmd", "startmn2.cmd" and "startmn3.cmd"
    2 - Go to controller wallet, check that your coins in Masternode 1, 2 and 3 addresses have at least 15 confirmations.
    3 - Go to Masternodes tab and switch to the "My Masternodes"
    4 - Press "Start All"

Thats all folks. You have created 3 working masternodes.
Don't be afraid to running PoS on controller wallet. It's do not damaged your masternode transactions because all masternode coins will be excluded from PoS.

In console