CryptoDredge 0.27.0 — CUDA Miner - page 42.

N0pr3s3n7

member

Activity: 107

Merit: 11

hello I see slight problem in 8 gpu rig , cards hashrates output etc is totally wrong , my cards are detected as :

but obviously hashrates shown next to them are totaly wrong as gtx 1070 cannot get more than 1080 for lyra2z.
Physical slots of cards is different than miner founds them , probably hashrates differencies come from there. Temp wise i think cards match their description.

4ward

member

Activity: 473

Merit: 18

Try Forager - Multi-algo switching miner for AMD/NVIDIA/CPU

Continuously developed, with largest selection and latest versions of miners and algos.
Highly configurable, Integrated Afterburner support for power usage and profit calculation

CryptoDredge support included Wink

JFoxOne

member

Activity: 640

Merit: 56

minerstat

Our customers suggested to add CryptoDredge, so we have implemented it in our minerstat's Linux based mining OS and profit switch system.

Enjoy your mining!

Dr_Victor

sr. member

Activity: 954

Merit: 250

Please, fix it - CD on NeoScrypt for gtx 1070 ti makes 1100 and for 1080 ti at the same time - 900 (TDP 56%) (Win10, latest drv.).

darkneorus

jr. member

Activity: 238

Merit: 3

just some stats -

P104-100s show almost 50% lower Lyra2z hashrate with latest Cryptodredge 0.8.3.
0.8.0 - 2600 kH/s, memory controller usage ~4%.
0.8.2 - 3880 kH/s, memory controller usage ~75%
0.8.3 - back to 2600 kH/s again, memory controller usage ~4%.

also, phi2 and allium definitely need more optimizations for P104-100s (1070 Ti's), now they are just ~10% faster than P106-100s (1060s), it doesn't seem right.

patiently waiting for a fix. thank you

slim6y

newbie

Activity: 30

Merit: 0

Loving CryptoDredge, but only for allium and lyra2z.

Tried for neoscrypt and sadly, pales in comparison to the HSRMINER Neoscrypt Fork by Justaminer (hint hint).

So, get that right, and I think we have the ultimate miner!

UpWind

newbie

Activity: 28

Merit: 0

Quote from: cryptodredge on August 11, 2018, 04:59:04 AM

Quote from: UpWind on August 11, 2018, 03:09:23 AM

Helloi I am under ubuntu 16.04 with cuda 9.2

Downloaded and run the latest version (803) but is giving an error:

Code:

$ sudo bash runlyra.sh

./CryptoDredge: error while loading shared libraries: libcares.so.2: cannot open shared object file: No such file or directory
': not a valid identifier `continueKey

Do you know what can I do?

Installing libc-ares2 package is as easy as running the following command on terminal: sudo apt-get install libc-ares2

Thank you very much, now it works.

cryptodredge

member

Activity: 157

Merit: 19

Quote from: UpWind on August 11, 2018, 03:09:23 AM

Helloi I am under ubuntu 16.04 with cuda 9.2

Downloaded and run the latest version (803) but is giving an error:

Code:

$ sudo bash runlyra.sh

./CryptoDredge: error while loading shared libraries: libcares.so.2: cannot open shared object file: No such file or directory
': not a valid identifier `continueKey

Do you know what can I do?

Installing libc-ares2 package is as easy as running the following command on terminal: sudo apt-get install libc-ares2

UpWind

newbie

Activity: 28

Merit: 0

Helloi I am under ubuntu 16.04 with cuda 9.2

Downloaded and run the latest version (803) but is giving an error:

Code:

$ sudo bash runlyra.sh

./CryptoDredge: error while loading shared libraries: libcares.so.2: cannot open shared object file: No such file or directory
': not a valid identifier `continueKey

Do you know what can I do?

jebidia

jr. member

Activity: 161

Merit: 1

Rock solid for me. On phi2: Evga sc 60 tdp +150 core 0 mem gets around 8.5 mh..gigabyte cards at tdp 60 core +200 mem 0 gets close to the evga

ripcurrent

member

Activity: 160

Merit: 10

It there a way to change the frequency of the hash rate report, for tuning purposes?

Saponetta

newbie

Activity: 28

Merit: 0

Any tips on how to increase stability with this miner?
I often get the 1 gpu to reset to default in afterburner then it ends up rebooting the rig. (tried both lowering the intensity and without overclock, basically only kept PL to 75%)

ty

gerask0

newbie

Activity: 258

Merit: 0

Quote from: Miro1764n on August 08, 2018, 07:12:48 PM

Quote from: gerask0 on August 07, 2018, 03:19:54 AM

have few cards 1080, and when start it togather on phi2 algo, two of them have lower hash than other, but if i start each card separately, they show the same hashrate

Your CPU is too slow or you do not have enough system memory.

7700k 8gb

Coin++

sr. member

Activity: 810

Merit: 444

A Linux version for Cuda 8 ?

Drifttap

newbie

Activity: 2

Merit: 0

Quote from: Miro1764n on August 08, 2018, 07:12:48 PM

Quote from: gerask0 on August 07, 2018, 03:19:54 AM

have few cards 1080, and when start it togather on phi2 algo, two of them have lower hash than other, but if i start each card separately, they show the same hashrate

Your CPU is too slow or you do not have enough system memory.

This problem only occurs on Crypto dredge from my experiences. Don't go changing your whole hardware configuration on something that came with a miner update. I believe the dev has already said he will be focusing on this issue in the coming updates.

Miro1764n

member

Activity: 232

Merit: 11

Quote from: gerask0 on August 07, 2018, 03:19:54 AM

have few cards 1080, and when start it togather on phi2 algo, two of them have lower hash than other, but if i start each card separately, they show the same hashrate

Your CPU is too slow or you do not have enough system memory.

cryptodredge

member

Activity: 157

Merit: 19

Quote from: sumit.mathur101 on August 07, 2018, 03:04:51 AM

Is it possible to set PL/tdp in bat file? without MSI afterburner? like in ccminer we can use --plimit , is there anything similar here that we can use?

Unfortunately, it is not possible yet. The task was created. Thanks for your suggestion

cryptodredge

member

Activity: 157

Merit: 19

Quote from: bruutje on August 07, 2018, 02:37:43 AM

Quote from: cryptodredge on August 06, 2018, 03:42:34 PM

Quote from: jyakulis on August 05, 2018, 08:27:54 PM

0.8 to 0.8.2 was a big boost on lyra2z for the gtx1070 (2500 kh/s to 3200 kh/s)

However, 0.8 to 0.8.2 the hashrate regressed on lyra2z for the gtx1070ti (3300 kh/s to 2700 kh/s)

Quote from: bruutje on August 06, 2018, 07:41:57 AM

love the improvements.
However since 0.8.2 my 1070 greatly outperforms my 1070ti's on Lyra2z.

1070 avg hash 3954 KH/s
1070ti avg hash 3220 KH/s

any ideas how? I've got 4 different 1070ti's and none come close to my normal 1070.... Sad

Could you check v0.8.3?

It's better now thanks, but the 1070 is still doing much better than the 1070ti's Sad

[08:35:47] INFO - GPU0 Gigabyte GTX 1070 Ti : 3395KH/s (Avr 3399KH/s) : 22.32KH/W : T=67C Fan=80%
[08:35:47] INFO - GPU1 EVGA GTX 1070 Ti : 3405KH/s (Avr 3407KH/s) : 22.47KH/W : T=66C Fan=80%
[08:35:47] INFO - GPU2 Zotac GTX 1070 Ti : 3383KH/s (Avr 3386KH/s) : 23.55KH/W : T=66C Fan=80%
[08:35:47] INFO - GPU3 Gigabyte GTX 1070 Ti : 3405KH/s (Avr 3399KH/s) : 22.40KH/W : T=66C Fan=80%
[08:35:47] INFO - GPU4 MSI GTX 1070 : 3973KH/s (Avr 3981KH/s) : 23.20KH/W : T=63C Fan=80%
[08:35:47] INFO - GPU5 Gigabyte GTX 1060 6GB : 2833KH/s (Avr 2829KH/s) : 21.35KH/W : T=65C Fan=80%
[08:35:47] INFO - Total hashrate 20.40MH/s

Thanks for your report. We'll try to figure out why it's happening

ggillies

newbie

Activity: 19

Merit: 0

Quote from: sabercrypto on August 06, 2018, 09:59:31 PM

Quote from: ggillies on August 06, 2018, 06:07:01 PM

WOW!!!!! Phi2 on 0.8.3 is SMOKING fast!!! I'm at 9.8 MH/s per card for my 1080tis ... Holy COW!

how about power consumption?

I am at 100% power, +75 GPU and +150 Mem clock. 8 X Nvidia 1080ti cards, Awesomeminer on Windows 10, latest NVIDIA drivers. Cheers.

johnreese5895

newbie

Activity: 56

Merit: 0

This miner is awesome for phi2 Grin

Topic: CryptoDredge 0.27.0 — CUDA Miner - page 42. (Read 86243 times)