Topic: CryptoDredge 0.27.0 — CUDA Miner - page 43. (Read 86186 times)
Failover pools please! In miner.cfg or config.txt
Hi,
How to run power consumption?
Regards.
I'm sorry but I meant by the power consumption monitoring the console outputHow to run power consumption?
Regards.
https://i.imgur.com/QY5e9OW.png
What is exactly parameter to see it in console?
Your performance figures on Neoscrypt are a little optimistic...
Using latest nVidia drivers, I get 1230 Mh/s on my 1080's at +110/+500 (vs 1330-1390 advertised above). Intensity at default (6).
...is anyone able to tell me what I'm doing wrong here or is the advertised speed really bogus? Or at 130% pl with 200+ overclocks?... Using latest nVidia drivers, I get 1230 Mh/s on my 1080's at +110/+500 (vs 1330-1390 advertised above). Intensity at default (6).
Increase the intensity. Excavator 1.4.4a is still the best miner for neoscrypt.
Yeah I know Excavator is good. But I'd rather not use Nicehash if I have the choice.
Anyways, that Neoscrypt coin I was looking at turned out to be shit, so back to the drawing board!
Your performance figures on Neoscrypt are a little optimistic...
Using latest nVidia drivers, I get 1230 Mh/s on my 1080's at +110/+500 (vs 1330-1390 advertised above). Intensity at default (6).
...is anyone able to tell me what I'm doing wrong here or is the advertised speed really bogus? Or at 130% pl with 200+ overclocks?... Using latest nVidia drivers, I get 1230 Mh/s on my 1080's at +110/+500 (vs 1330-1390 advertised above). Intensity at default (6).
Increase the intensity. Excavator 1.4.4a is still the best miner for neoscrypt.
Yeah I know Excavator is good. But I'd rather not use Nicehash if I have the choice.
Anyways, that Neoscrypt coin I was looking at turned out to be shit, so back to the drawing board!
i like this miner 
in any case is the best miner for phi2
have few cards 1080, and when start it togather on phi2 algo, two of them have lower hash than other, but if i start each card separately, they show the same hashrate
Is it possible to set PL/tdp in bat file? without MSI afterburner? like in ccminer we can use --plimit , is there anything similar here that we can use?
0.8 to 0.8.2 was a big boost on lyra2z for the gtx1070 (2500 kh/s to 3200 kh/s)
However, 0.8 to 0.8.2 the hashrate regressed on lyra2z for the gtx1070ti (3300 kh/s to 2700 kh/s)
However, 0.8 to 0.8.2 the hashrate regressed on lyra2z for the gtx1070ti (3300 kh/s to 2700 kh/s)
love the improvements.
However since 0.8.2 my 1070 greatly outperforms my 1070ti's on Lyra2z.
1070 avg hash 3954 KH/s
1070ti avg hash 3220 KH/s
any ideas how? I've got 4 different 1070ti's and none come close to my normal 1070....
Could you check v0.8.3?However since 0.8.2 my 1070 greatly outperforms my 1070ti's on Lyra2z.
1070 avg hash 3954 KH/s
1070ti avg hash 3220 KH/s
any ideas how? I've got 4 different 1070ti's and none come close to my normal 1070....
It's better now thanks, but the 1070 is still doing much better than the 1070ti's
[08:35:47] INFO - GPU0 Gigabyte GTX 1070 Ti : 3395KH/s (Avr 3399KH/s) : 22.32KH/W : T=67C Fan=80%
[08:35:47] INFO - GPU1 EVGA GTX 1070 Ti : 3405KH/s (Avr 3407KH/s) : 22.47KH/W : T=66C Fan=80%
[08:35:47] INFO - GPU2 Zotac GTX 1070 Ti : 3383KH/s (Avr 3386KH/s) : 23.55KH/W : T=66C Fan=80%
[08:35:47] INFO - GPU3 Gigabyte GTX 1070 Ti : 3405KH/s (Avr 3399KH/s) : 22.40KH/W : T=66C Fan=80%
[08:35:47] INFO - GPU4 MSI GTX 1070 : 3973KH/s (Avr 3981KH/s) : 23.20KH/W : T=63C Fan=80%
[08:35:47] INFO - GPU5 Gigabyte GTX 1060 6GB : 2833KH/s (Avr 2829KH/s) : 21.35KH/W : T=65C Fan=80%
[08:35:47] INFO - Total hashrate 20.40MH/s
WOW!!!!! Phi2 on 0.8.3 is SMOKING fast!!! I'm at 9.8 MH/s per card for my 1080tis ... Holy COW!
how about power consumption?
Downloads
Windows Download (CUDA 9.2 version)
Linux Download (CUDA 9.2 version)
Mirror on GitHub (CUDA 9.1/9.2 version)
Release 0.8.3 - (August 7, 2018)
Happy mining!
The CryptoDredge Team.
Windows Download (CUDA 9.2 version)
Linux Download (CUDA 9.2 version)
Mirror on GitHub (CUDA 9.1/9.2 version)
Release 0.8.3 - (August 7, 2018)
- Fix TCP and WebSocket connections used for API
- Fix Lyra2z performance on 1070 Ti and P104-100 graphics cards
Happy mining!
The CryptoDredge Team.
The API now run good and smoothly with awesome miner.
Good job.
thanks
WOW!!!!! Phi2 on 0.8.3 is SMOKING fast!!! I'm at 9.8 MH/s per card for my 1080tis ... Holy COW!
thanks for the api fix 
here some bench result for 8.3 on various cards at TDP 60% cc+100/+150 mc-500 :
...
Thanks. I'm sure others will find your results very helpful. here some bench result for 8.3 on various cards at TDP 60% cc+100/+150 mc-500 :
...
thanks for the api fix
here some bench result for 8.3 cuda9.2 windows version on various cards at TDP 60% cc+100/+150 mc-500 :
https://preview.ibb.co/dK2n0e/phi2.png
https://preview.ibb.co/dxeBRK/skein.png
https://preview.ibb.co/njeZfe/tribus.png
https://preview.ibb.co/dWbEfe/neoscrypt.png
https://preview.ibb.co/fKtc0e/lyra2z.png
https://preview.ibb.co/hwqkmK/lyra2v2.png
https://preview.ibb.co/nm0RRK/allium.png
here some bench result for 8.3 cuda9.2 windows version on various cards at TDP 60% cc+100/+150 mc-500 :
https://preview.ibb.co/dK2n0e/phi2.png
https://preview.ibb.co/dxeBRK/skein.png
https://preview.ibb.co/njeZfe/tribus.png
https://preview.ibb.co/dWbEfe/neoscrypt.png
https://preview.ibb.co/fKtc0e/lyra2z.png
https://preview.ibb.co/hwqkmK/lyra2v2.png
https://preview.ibb.co/nm0RRK/allium.png
Hi,
How to run power consumption?
Regards.
I'm sorry but I meant by the power consumption monitoring the console outputHow to run power consumption?
Regards.
CD .6 and up are no longer working on PHI2 after fork...please advise
Cryptodredge has problems with Lux's smart contracts.We'll try to fix it as soon as possible. Sorry for the inconvenience!
question. you can make under the algoritm HEX, it's possible, you would be the first))))
the algorithm is new, only this coin has this algo, you would become a leader, the xDNA community is very large, the algorithm "Hex" only for video cards
https://github.com/XDNA-Core/ccminer-hex
Some users reported hashrate drops for upper end cards like 1080 TI on 0.8.2, should we wait for future releases for improvements on 1080 TI ?..
Also what Overclock settings would you recommend for 1080 TI when mining Lyra2Rev2 ?..
All the Best
That's strange. We didn't do any changes on Lyra2REv2 since 0.4.1 version. We'll check it sooner or later. Also what Overclock settings would you recommend for 1080 TI when mining Lyra2Rev2 ?..
All the Best
0.8 to 0.8.2 was a big boost on lyra2z for the gtx1070 (2500 kh/s to 3200 kh/s)
However, 0.8 to 0.8.2 the hashrate regressed on lyra2z for the gtx1070ti (3300 kh/s to 2700 kh/s)
However, 0.8 to 0.8.2 the hashrate regressed on lyra2z for the gtx1070ti (3300 kh/s to 2700 kh/s)
love the improvements.
However since 0.8.2 my 1070 greatly outperforms my 1070ti's on Lyra2z.
1070 avg hash 3954 KH/s
1070ti avg hash 3220 KH/s
any ideas how? I've got 4 different 1070ti's and none come close to my normal 1070....
Could you check v0.8.3? However since 0.8.2 my 1070 greatly outperforms my 1070ti's on Lyra2z.
1070 avg hash 3954 KH/s
1070ti avg hash 3220 KH/s
any ideas how? I've got 4 different 1070ti's and none come close to my normal 1070....
How to set the intensity of the first graphics card 3 and the second 6?
No way. As a workaround for this issue, you might use a few CryptoDredge instances with -d option.e.g.:
Code: (first.bat)
CryptoDredge -a -o stratum+tcp:// -u -p -d 0 -i 3
Code: (second.bat)
CryptoDredge -a -o stratum+tcp:// -u -p -d 1
Can we expect this option? this is very important
Hello, is there any diff between cuda 9.1 and cuda 9.2?
The difference is not significant. The cu9.2 version faster cu9.1 by about 0.7% (depend on GPU and algorithm)Tested on 1060 and Phi2
Jump to: