cant start argon2d (nim) even from your bat file inside miner, whats a problem?
The same problem, miner can't get any job from pool 
Topic: CryptoDredge 0.27.0 — CUDA Miner - page 7. (Read 86186 times)
ae and grin, api hashrate is 0
KHS=0.00
KHS=0.00
Ok, Mr CryptoDredge, thanks for the new miner... but the NIM hashrate on pool ends up being 20% of what it should be so there's definitely some homework left to do here.
Using NoncerPro, pool hashrate matches what's on the miner console.
At least using icemining.ca.
Using NoncerPro, pool hashrate matches what's on the miner console.
At least using icemining.ca.
cant start argon2d (nim) even from your bat file inside miner, whats a problem?
Windows 10 (all patches), Newest 430.64. MTP Algo
CD 20.1 @ 1070 and 1080 is way too slow compared to the new TR. Any chance to improve the hashrate?
(One of my mixed rigs gives just 16 MH/s vs 20 MH/s.)
CD 20.1 Cuda 10.1 @ 1080 Ti needs less power than Cuda 10.0, but also gives ~4% less hashrate. Here's one example of a 8-cards rig:
Cuda 10.0...33.74 MH/s, 2302W
Cuda 10.1...32.29 MH/s, 2232W
Same picture on RTX 2070, so didn't tested 2080 and 2080 TI's right now.
CD 20.1 @ 1070 and 1080 is way too slow compared to the new TR. Any chance to improve the hashrate?
(One of my mixed rigs gives just 16 MH/s vs 20 MH/s.)
CD 20.1 Cuda 10.1 @ 1080 Ti needs less power than Cuda 10.0, but also gives ~4% less hashrate. Here's one example of a 8-cards rig:
Cuda 10.0...33.74 MH/s, 2302W
Cuda 10.1...32.29 MH/s, 2232W
Same picture on RTX 2070, so didn't tested 2080 and 2080 TI's right now.
CryptoDredge 0.20.1 (Windows/Linux) added to https://www.minermonitoring.com/
Join our discord https://discord.gg/aGGaeqq
also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark
Any plans for x25x for suqa rebrand?
I see 0.20.0 release but no file on github. 
I get after updating to 0.20.0-cuda92 or 0.20.0-cuda100 the follow error: INFO - 0/2 Rejected : diff= at my 1660TI rig on HiveOS with driver 418.56.
I have try minerstat and runing CryptoDredge 0.19.1 NVIDIA GPU Miner it is showing
ERROR - Stratum: Not authorized
ERROR - Stratum: Not authorized
Thank you very much. 
Quote
Can it mine XZC on windows with 1060 6GB ?
Yes, as readme.txt says:
6. MTP Algorithm
System Requirements:
* GPUs with at least 5 GB of memory
* There are no special CPU and RAM requirements, 4 GB must be sufficient
4GB VRAM is sufficient, but is the minimum, to mine MTP ...
#crysx
Quote
Can it mine XZC on windows with 1060 6GB ?
Yes, as readme.txt says:
6. MTP Algorithm
System Requirements:
* GPUs with at least 5 GB of memory
* There are no special CPU and RAM requirements, 4 GB must be sufficient
Is this the best miner for mining Zcoin (MTP)? What hashrates should I get with a 1080 Ti or a 2080 Ti at 75-80% power limit?
1080ti @ 70TDP +100 core gets about 19 mh
Mh/s (TDP 75%)
I apologise... Was looking at my 6 card total. You are correct.
Is this the best miner for mining Zcoin (MTP)? What hashrates should I get with a 1080 Ti or a 2080 Ti at 75-80% power limit?
1080ti @ 70TDP +100 core gets about 19 mh
Can it mine XZC on windows with 1060 6GB ?
Is this the best miner for mining Zcoin (MTP)? What hashrates should I get with a 1080 Ti or a 2080 Ti at 75-80% power limit?
Hey, could you add the --rigid RFC param that many CN pool support?
v0.19.1 released (Important update)
Download: https://cryptodredge.org/#download
Mirror: https://github.com/technobyl/CryptoDredge/releases/tag/v0.19.1
Happy mining!
The CryptoDredge Team
- Fix issue related to 'Handshake failed with fatal error SSL_ERROR_SSL'
- Fix crash after devfee's session is started
- Other minor fixes
- Build first CUDA 10.1 version
Download: https://cryptodredge.org/#download
Mirror: https://github.com/technobyl/CryptoDredge/releases/tag/v0.19.1
Happy mining!
The CryptoDredge Team
Unfortunately there seems to be an issue with version 19.1 quitting at startup if the --no-nvml parameter is used. When I include that parameter, "WARN - NVML is disabled" is displayed and then the next line is "Press any key to continue...". If I don't include --no-nvml, the miner runs fine with all the other parameters. I tried this with both the Cuda 10 and Cuda 10.1 versions for Windows. This was not an issue with previous versions of your miner, so I wanted to let you know.
v0.19.1 released (Important update)
Download: https://cryptodredge.org/#download
Mirror: https://github.com/technobyl/CryptoDredge/releases/tag/v0.19.1
Happy mining!
The CryptoDredge Team
- Fix issue related to 'Handshake failed with fatal error SSL_ERROR_SSL'
- Fix crash after devfee's session is started
- Other minor fixes
- Build first CUDA 10.1 version
Download: https://cryptodredge.org/#download
Mirror: https://github.com/technobyl/CryptoDredge/releases/tag/v0.19.1
Happy mining!
The CryptoDredge Team
Jump to: