Pages:
Author

Topic: CryptoDredge 0.27.0 — CUDA Miner - page 7. (Read 86243 times)

newbie
Activity: 7
Merit: 0
June 05, 2019, 04:30:27 AM
cant start argon2d (nim) even from your bat file inside miner, whats a problem?
The same problem, miner can't get any job from pool
newbie
Activity: 16
Merit: 0
June 03, 2019, 07:17:06 PM
ae and grin,  api  hashrate is 0

KHS=0.00
hero member
Activity: 1274
Merit: 556
June 03, 2019, 11:44:55 AM
Ok, Mr CryptoDredge, thanks for the new miner... but the NIM hashrate on pool ends up being 20% of what it should be so there's definitely some homework left to do here.

Using NoncerPro, pool hashrate matches what's on the miner console.

At least using icemining.ca.
newbie
Activity: 3
Merit: 0
June 03, 2019, 05:44:37 AM
cant start argon2d (nim) even from your bat file inside miner, whats a problem?
member
Activity: 418
Merit: 21
June 03, 2019, 04:28:15 AM
Windows 10 (all patches), Newest 430.64. MTP Algo

CD 20.1 @ 1070 and 1080 is way too slow compared to the new TR. Any chance to improve the hashrate?
(One of my mixed rigs gives just 16 MH/s vs 20 MH/s.)

CD 20.1 Cuda 10.1 @ 1080 Ti needs less power than Cuda 10.0, but also gives ~4% less hashrate. Here's one example of a 8-cards rig:
Cuda 10.0...33.74 MH/s, 2302W
Cuda 10.1...32.29 MH/s, 2232W

Same picture on RTX 2070, so didn't tested 2080 and 2080 TI's right now.
newbie
Activity: 155
Merit: 0
June 02, 2019, 09:29:19 PM

CryptoDredge 0.20.1 (Windows/Linux) added to https://www.minermonitoring.com/



Join our discord https://discord.gg/aGGaeqq



also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark
legendary
Activity: 1537
Merit: 1005
May 30, 2019, 08:18:58 AM
Any plans for x25x for suqa rebrand?
jr. member
Activity: 71
Merit: 1
May 28, 2019, 02:28:13 PM
I see 0.20.0 release but no file on github.  Embarrassed
newbie
Activity: 46
Merit: 0
May 28, 2019, 02:38:51 AM
I get after updating to 0.20.0-cuda92 or 0.20.0-cuda100 the follow error: INFO  - 0/2 Rejected : diff= at my 1660TI rig on HiveOS with driver 418.56.
newbie
Activity: 7
Merit: 0
May 26, 2019, 02:47:29 AM
I have try minerstat and runing CryptoDredge 0.19.1 NVIDIA GPU Miner it is showing

ERROR - Stratum: Not authorized
newbie
Activity: 1
Merit: 0
May 23, 2019, 12:52:20 PM
Thank you very much. Smiley Smiley
legendary
Activity: 2940
Merit: 1091
--- ChainWorks Industries ---
May 23, 2019, 10:00:28 AM
Quote
Can it mine XZC on windows with 1060 6GB ?

Yes, as readme.txt says:
  6. MTP Algorithm

    System Requirements:

      * GPUs with at least 5 GB of memory
      * There are no special CPU and RAM requirements, 4 GB must be sufficient




4GB VRAM is sufficient, but is the minimum, to mine MTP ...

#crysx
newbie
Activity: 58
Merit: 0
May 17, 2019, 07:19:22 PM
Quote
Can it mine XZC on windows with 1060 6GB ?

Yes, as readme.txt says:
  6. MTP Algorithm

    System Requirements:

      * GPUs with at least 5 GB of memory
      * There are no special CPU and RAM requirements, 4 GB must be sufficient


jr. member
Activity: 161
Merit: 1
May 15, 2019, 06:19:48 AM
Is this the best miner for mining Zcoin (MTP)? What hashrates should I get with a 1080 Ti or a 2080 Ti at 75-80% power limit?

1080ti @ 70TDP +100 core gets about 19 mh
Good joke! gtx 1080ti on MTP gives about 3.3
Mh/s (TDP 75%)

I apologise... Was looking at my 6 card total.  You are correct.
sr. member
Activity: 954
Merit: 250
May 15, 2019, 02:30:59 AM
Is this the best miner for mining Zcoin (MTP)? What hashrates should I get with a 1080 Ti or a 2080 Ti at 75-80% power limit?

1080ti @ 70TDP +100 core gets about 19 mh
Good joke! gtx 1080ti on MTP gives about 3.3 Mh/s (TDP 75%)
member
Activity: 74
Merit: 20
May 14, 2019, 02:27:41 PM
Can it mine XZC on windows with 1060 6GB ?
newbie
Activity: 196
Merit: 0
May 14, 2019, 12:46:19 PM
Is this the best miner for mining Zcoin (MTP)? What hashrates should I get with a 1080 Ti or a 2080 Ti at 75-80% power limit?
member
Activity: 204
Merit: 10
May 13, 2019, 11:33:42 PM
Hey, could you add the --rigid RFC param that many CN pool support?
newbie
Activity: 481
Merit: 0
May 13, 2019, 10:48:04 PM
v0.19.1 released (Important update)

  • Fix issue related to 'Handshake failed with fatal error SSL_ERROR_SSL'
  • Fix crash after devfee's session is started
  • Other minor fixes
  • Build first CUDA 10.1 version

Download: https://cryptodredge.org/#download
Mirror: https://github.com/technobyl/CryptoDredge/releases/tag/v0.19.1

Happy mining!
The CryptoDredge Team

Unfortunately there seems to be an issue with version 19.1 quitting at startup if the --no-nvml parameter is used.  When I include that parameter, "WARN  - NVML is disabled" is displayed and then the next line is "Press any key to continue...".  If I don't include  --no-nvml, the miner runs fine with all the other parameters. I tried this with both the Cuda 10 and Cuda 10.1 versions for Windows. This was not an issue with previous versions of your miner, so I wanted to let you know.
member
Activity: 157
Merit: 19
May 13, 2019, 06:20:52 AM
v0.19.1 released (Important update)

  • Fix issue related to 'Handshake failed with fatal error SSL_ERROR_SSL'
  • Fix crash after devfee's session is started
  • Other minor fixes
  • Build first CUDA 10.1 version

Download: https://cryptodredge.org/#download
Mirror: https://github.com/technobyl/CryptoDredge/releases/tag/v0.19.1

Happy mining!
The CryptoDredge Team
Pages:
Jump to: