Topic: CryptoGen NVidia GPU Miner - page 2. (Read 8534 times)
The automatic difficulty is not reliable for my tests on bsod atleast. It was too low and was getting horrible hashrate poolside.
Thank you for the release.
I think this miner performs well and on par with Cryptodredge if you setup the stratum difficulty manually.
I think this miner performs well and on par with Cryptodredge if you setup the stratum difficulty manually.
Two things to focus on :
- Fine tuning of intensity : for example, an intensity of 19 or 19.5 if fine for 1080 Ti
- Difficulty : best way is to run with automatic diff from pool, then after stabilization, examine choosen diff from pool and force it in pool parameters
To force manually difficulty, change the "pass" parameter by adding a "d=" item :
- in config file : "pass": "c=COIN,d=XX"
- in command line : -p c=COIN,d=XX
replace COIN by coin code (ex: LUX) and XX by the wanted difficulty (ex: 48)
By the way, don't forget to define several pools in the coin config file : if a pool fails or can't be reached, CryptoGen automatically switches to the next pool in the list.
This way, you never lose money !
Thank you for the release.
I think this miner performs well and on par with Cryptodredge if you setup the stratum difficulty manually.
I think this miner performs well and on par with Cryptodredge if you setup the stratum difficulty manually.
Hi guys
A new version v3.0.5 is available here :
https://github.com/genminer/cryptogen/releases/tag/v3.0.5
Happy mining !
A new version v3.0.5 is available here :
https://github.com/genminer/cryptogen/releases/tag/v3.0.5
- Improvement on stratum disconnect management
- Reinforcement of pool switching processing
- Some optimizations for best hashrates
Happy mining !
I'm testing this miner, but I have a problem. When it starts mining the dev fee and connects to the dev pool it cannot restore to mine pool after that is the connection always goes to timeout.
Hmm. First time I see this.
What is the pool ?
pickaxe
I'm testing this miner, but I have a problem. When it starts mining the dev fee and connects to the dev pool it cannot restore to mine pool after that is the connection always goes to timeout.
Hmm. First time I see this.
What is the pool ?
pickaxe
I'm testing this miner, but I have a problem. When it starts mining the dev fee and connects to the dev pool it cannot restore to mine pool after that is the connection always goes to timeout.
Hmm. First time I see this.
What is the pool ?
I'm testing this miner, but I have a problem. When it starts mining the dev fee and connects to the dev pool it cannot restore to mine pool after that is the connection always goes to timeout.
I tried on 3 different yiimp based pools. I have 2 small rigs and it's also possible that the dev fee starts to mine not in sync at different times and makes it look like a lower average hashrate on the pool side.
That's probable : dev fee starts randomly during first hour of mining.
I tried on 3 different yiimp based pools. I have 2 small rigs and it's also possible that the dev fee starts to mine not in sync at different times and makes it look like a lower average hashrate on the pool side.
I tested this miner for 24 hours and I actually got better results with coolminer and ccminer 2.3 . The cryptogen displayed hashrate is higher but the real pool rate is lower. On the other side coolminer and tpruvot ccminer show a little lower on comp but the real on the hash on pool is higher.
Which algo / coin / pool did you test ?Some combinations are better than others.
I tested this miner for 24 hours and I actually got better results with coolminer and ccminer 2.3 . The cryptogen displayed hashrate is higher but the real pool rate is lower. On the other side coolminer and tpruvot ccminer show a little lower on comp but the real on the hash on pool is higher.
3.0.4 is still slow poolside on bsod.pw. I saw 3.0.5 being used on pickaxe.pro but couldnt find it in github. any worthy changes?
3.0.5 still in test. Not yet released 
3.0.4 is still slow poolside on bsod.pw. I saw 3.0.5 being used on pickaxe.pro but couldnt find it in github. any worthy changes?
Hi guys
A new version v3.0.4 is available here :
https://github.com/genminer/cryptogen/releases/tag/v3.0.4
A new version v3.0.4 is available here :
https://github.com/genminer/cryptogen/releases/tag/v3.0.4
- Some improvements on x17 algo
- Fixed bug on reported pool hashrate
We dont have all infos on pool fees.
But dont worry guys.
If I find a bug, I'll push a new release on github
But dont worry guys.
If I find a bug, I'll push a new release on github
I'm facing the same issue, my local hashrate is 32-33 Mh/s, but at BSOD pool reported 17-22 Mh/s (2x GTX1080Ti and 5x GTX1070).
Just thinking, it may be related to the dev pool fee. It's probably when the miner connected to the dev pool, the reported hashrate to the main pool may decrease due to delayed time.
Just thinking, it may be related to the dev pool fee. It's probably when the miner connected to the dev pool, the reported hashrate to the main pool may decrease due to delayed time.
I'm investigating.
Currently tracking a possible sneaky bug on shares validation.
Currently tracking a possible sneaky bug on shares validation.
I can confirm that pool and miner hashrate are not consistent.
I tested for several hours although on the miner it shows really good numbers with 17mh for 2x 1080ti and 1x 1070. but on the pool it is at least 30% lower consistently.
I tested for several hours although on the miner it shows really good numbers with 17mh for 2x 1080ti and 1x 1070. but on the pool it is at least 30% lower consistently.
Same here
Jump to: