Topic: CryptoGen NVidia GPU Miner - page 4. (Read 8576 times)
dev fee too high! How to reduce dev fee to 1% Sir?
Looks good I'll give it a try. Will see if I can get some benchmarks setup to compare.
This is the best method, indeed.
it is always the same hashrate as other miners. so why ?
Hmm did you try, with the same config : algo, intensity, OC settings (my examples are for 70% power) ?Last but not least, my miner is quite good for new phi2 algo. Lux miners know :-)
Looks good I'll give it a try. Will see if I can get some benchmarks setup to compare.
it is always the same hashrate as other miners. so why ?
New miner, great. Do you have any benchmark for 10xx cards?
Well, it depends on the card, the intensity, the algo, the oc settings and the chip lottery.
Some are better than others.
For example, with a 1080ti 70% TDP, +100 Core, -400 Mem :
x17 algo gives around 18-21 MH/s
Phi algo gives around 33-36 MH/s
With a 1050ti 90% TDP,+0 Core, -200 Mem :
x17 gives around 4.5-5.0 MH/s
phi gives around 6.5-7.5 MH/s
Personally I prefer stability and low temperatures to save the hardware.
New miner, great. Do you have any benchmark for 10xx cards?
Yeah benchmarks would be a good thing which would probably me persuade me to use this.
Simply claiming "this hashes faster" than other miners might not enough to sway the public. Don't get me wrong, like what other posters have said, I really also do admire the effort you've put into making this, it's just that we need more tangible evidence.
Great! Allow me to be the first to congratulate you on launching your miner.
I really haven't personally tried this yet but everything looks in order and professionally done. Doesn't seem like this much effort was done just to scam people. I wish you nothing but the best for the success of your miner.
I really haven't personally tried this yet but everything looks in order and professionally done. Doesn't seem like this much effort was done just to scam people. I wish you nothing but the best for the success of your miner.
Thank you !
New miner, great. Do you have any benchmark for 10xx cards?
Great! Allow me to be the first to congratulate you on launching your miner.
I really haven't personally tried this yet but everything looks in order and professionally done. Doesn't seem like this much effort was done just to scam people. I wish you nothing but the best for the success of your miner.
I really haven't personally tried this yet but everything looks in order and professionally done. Doesn't seem like this much effort was done just to scam people. I wish you nothing but the best for the success of your miner.
____ ____ _ ____ ____ ____ ____ ____ __
| __\| o \||_/\| o \|_ _\| || _\| __\| \|\
| \__| <_| __/| __/ || | o || [ \| ]_| \|
|___/|/\_/|/ |/ |/ |___/|___/|___/|/\_/
Latest version is v3.0.5
Supports phi2 Luxcoin new algo
DOWNLOAD :
* Windows : https://github.com/genminer/cryptogen/releases
* Linux : not yet
HARDWARE / SYSTEM NEEDED :
- OS : Windows 10 x64 (pro or enterprise recommended)
- GPUs : 98x / 10xx cards (1080ti 8GB+ recommended :-)
- Recent nVidia drivers up to versions 397.x, with compute capability 5.0 and beyond.
Avoid version 398.x as it seems to create problems.
FEATURES :
- Built for nVidia with CUDA 7.5, 32bits version (anyway faster than 64bits version)
- New optimized code with special portions. Effective hashrate is higher, without power overkill.
- Up to 16 GPUs can be used.
- Supports Stratum versions
- Shows detailed mining information and hashrate for each card.
SPECIAL FEATURES :
- Supplied batch file allows easier choice for mining.
- You may create configuration files with pools, one file for each coin. Much simple to manage.
- Up to 16 pools in each configuration file.
- Automatic watchdog, auto-terminate if too many errors occurs (--max-rejects, default=7)
- Inactivity watchdog, auto-terminate if program stucks more than 120s.
- Automatic failover to next pool if current doesn't work.
- Miner can be restarted if too many blocks pass without submission (-M, --max-blocks-null)
- Special parameters can be used in the configuration file / pools zone (%WORKER%, %DIFF%)
INSTALLATION GUIDE :
- Unzip downloaded file into desired folder
- Update cryptogen.*.conf files with your own information (pools, wallet addresses, etc)
- Feel free to add new pools in .conf files
- Feel free to add new conf files for your preferred coins.
- Update file CRYPTOGEN-MINE.bat to choose coin to mine.
- Execute (double-click) CRYPTOGEN-MINE.bat
CONFIGURATION FILES :
The batch file CRYPTOGEN-MINE.bat uses one configuration file for each coin to mine.
These files must be in JSON format, some are provided as examples.
Some options (like -w or -z) define "tags" values usable in config file.
FREE SOFTWARE :
Using this software is free, however, a default developer fee of 2% is applied. During each cycle of 6000 seconds (100 minutes),
the software will mine 120s for the developer. One don't know in advance when the developer mining will occur during the cycle.
You can reduce the fee, anyway your contribution is highly appreciated. If you don't agree with this, don't use this software.
COMMAND LINE OPTIONS :
-a, --algo=ALGO Specify the algorithm to use
bastion Hefty bastion
bitcore Timetravel-10
blake Blake256-14rounds(SFR)
blake2s Blake2s (NEVA/XVG/XSH)
blakecoin Blake256-8rounds (BLC)
bmw BMW 256
cryptolight AEON cryptonight(MEM / 2)
cryptonight XMR cryptonight
c11 C11/flax (AXS/CHC/SPD/IMC/JLG/DXC/ANU)
decred Blake256-14rounds(DCR)
deep Deepcoin
dmd-gr Diamond - Groestl
equihash Zcash Equihash
fresh Freshcoin(shavite 80)
fugue256 Fuguecoin
groestl Groestlcoin
hmq1725 Doubloons/Espers
hsr X13+SM3 (Hshare)
jackpot JHA v8
keccak keccak256 (Maxcoin)
keccakc Keccak - 256 (CreativeCoin)
lbry Lbry (Library Credits)
luffa Joincoin
lyra2 CryptoCoin
lyra2v2 VertCoin
lyra2z ZeroCoin(3rd impl)
myr-gr Myriad-Groestl (SFR/AUR/DGB/XVG/MYR)
neoscrypt Neoscrypt (FTC/PXC/UFO)
nist5 NIST5 (Talkcoin/Power)
penta Pentablake hash(5x Blake 512)
phi PHI1612 (LUX/FLM/SERA)
phi2 PHI v2 (LUX since block 300K)
polytimos Politimos
quark Quark (Quarkcoin)
qubit Qubit
sha256d SHA256d (bitcoin)
sha256t SHA256 x3
sia Sia (SIAcoin)
sib X11+gost (Sibcoin)
scrypt Scrypt
scrypt-jane Scrypt-jane Chacha
skein Skein SHA2 (AUR/DGB/SKC)
skein2 Double Skein (Woodcoin)
vcash Blake256-8rounds (XVC)
skunk Skein Cube Fugue Streebog
s3 S3 (1Coin)
timetravel Machinecoin permuted x8
tribus Denarius
vanilla Blake256-8 (VNL)
veltor Thorsriddle streebog
whirlcoin Old Whirlcoin (Whirlpool algo)
whirlpool Whirlpool (JoinCoin)
x11 X11 (DarkCoin)
x11evo Permuted x11 (Revolver)
x12 X12 (GalaxyCash)
x13 X13 (MaruCoin)
x14 X14 (BernCoin)
x15 X15 (Joincoin)
x15 X15
x16r X16R (Raven)
x16s X16S
x17 X17 (XVG)
wildkeccak Boolberry
zr5 ZR5 (ZiftrCoin)
--api-remote Allow remote control, like pool switching
-b, --api-bind=port IP:port for the miner API (ex: 127.0.0.1:4068),
0=disabled (default disabled)
-B, --background Run the miner in the background
--benchmark Run in offline benchmark mode
--cert=FILE Certificate for mining server using SSL
-c, --config=FILE Load a JSON-format configuration file
--cputest Debug hashes from cpu algorithms
--cpu-affinity Set process affinity to cpu core(s), mask 0x3 for cores 0 and 1
--cpu-priority Set process priority (default: 3) 0 idle, 2 normal to 5 highest
--cuda-schedule Set device threads scheduling mode (default: auto)
-D, --debug Enable debug output
-d, --devices Comma separated list of CUDA devices to use.
Device IDs start counting from 0!Alternatively takes
string names of your cards like gtx780ti or gt640#2
(matching 2nd gt640 in the PC)
-f, --diff-factor Divide difficulty by this factor (default 1.0)
--donate Percentage of time to donate to the developer
-h, --help Display this help text and exit
-i, --intensity=N[,N] GPU intensity 8.0-25.0 (default: auto)
Decimals are allowed for fine tuning
-m, --diff-multiplier Multiply difficulty by this value (default 1.0)
-M, --max-blocks-null Maximum quantity of blocks without submit before
terminating (default no limit)
--max-rejects Maximum quantity of rejected blocks before terminating
(value between 3 and 32, default=7).
--max-temp=N Only mine if gpu temp is less than specified value
--max-rate=N[KMG] Only mine if net hashrate is less than specified value
--max-diff=N Only mine if net difficulty is less than specified value
Can be tuned with --resume-diff=N to set a resume value
-n, --ndevs List cuda devices
-N, --statsavg Number of samples used to compute hashrate (default: 30)
--no-color Disable colored output
--no-extranonce Disable extranonce subscribe on stratum
--no-gbt Disable getblocktemplate support (height check in solo)
--no-longpoll Disable X-Long-Polling support
--no-stratum Disable X-Stratum support
-o, --url=URL URL of mining server
-O, --userpass=U:P username:password pair for mining server
-p, --pass=PASSWORD Password for mining server
-P, --protocol-dump Verbose dump of protocol-level activities
-q, --quiet Disable per-thread hashmeter output
-R, --retry-pause=N Time to pause between retries, in seconds (default: 30)
-r, --retries=N Number of times to retry if a network call fails
(default: retry indefinitely)
-s, --scantime=N Upper bound on time spent scanning current work when
long polling is unavailable, in seconds (default: 60)
-T, --timeout=N Network timeout, in seconds (default: 300)
-t, --threads=N Number of miner threads (default: number of nVidia GPUs)
--time-limit Maximum time (seconds) to mine before exiting the program.
--trust-pool Trust the max block reward vote (maxvote) sent by the pool
-u, --user=USERNAME Username for mining server
--vote=VOTE Vote (for decred and HeavyCoin)
-V, --version Display version information and exit
-x, --proxy=[PROTOCOL://]HOST[:PORT] Connect through a proxy
-z, --diff=0.0 Set wanted difficulty, to be used in pool file as DIFF
When reach, end program
--watch-timeout Timeout in seconds for inactivity. Value between 30 and 3600,
default=120, 0 to disable inactivity watchdog.
--watch-quiet Dont display watchdog living messages
-w, --worker=name Set worker name, to be used in pool file as WORKER
default : computer name.
GPUs options :
--mem-clock=3505 Set the gpu memory boost clock
--gpu-clock=1150 Set the gpu engine boost clock
--plimit=100 Set the gpu power limit in percentage
--tlimit=80 Set the gpu thermal limit in degrees
--led=100 Set the logo led level (0=disable, 0xFF00FF for RVB)
VERSION HISTORY :
See details on https://github.com/genminer/cryptogen
Jump to: