Pages:
Author

Topic: Custom Innosilicon A2 Terminator image - Anx Edition - page 7. (Read 22709 times)

legendary
Activity: 2702
Merit: 1030
Yes I am a pirate, 300 years too late!
It has spaces for the fans.  ZoomHash so far has sent this, Can you send me a picture of the SD card slot?

Pic sent.  Still hashing at a constant 87 Mh/s.
hero member
Activity: 687
Merit: 511
The 110 with 3 fans is currently running in a datacenter env for summer, just checked: 38-39°C on all blades avg. The 88 in my basement is on 31-33°C avg.

Interesting, I would assume that the datacenter is cooler than your basement, correct?  Does the case the 110's are in have spots in the back for fans to be mounted?  With all of my 88 cases, they have vents in the back obviously, but none of them have fan mounting holes on them, whereas the 110's clearly have spots for fans on the left and right side.  Just wondering if they just weren't included in yours for some reason.  I have had 110's that were missing fans before, but I've always just chalked it up to being used and put a new one in...
legendary
Activity: 1612
Merit: 1608
精神分析的爸
Quote
Personally, I'm surprised the 110's would run with 3 fans, my 88's run considerably cooler than the 110's, and the 110's run hot with 5 fans, I couldn't imagine running them on 3.  What are the temps like on your black one?

The 110 with 3 fans is currently running in a datacenter env for summer, just checked: 38-39°C on all blades avg. The 88 in my basement is on 31-33°C avg.
hero member
Activity: 687
Merit: 511
As I'm starting to lock down this next release, one thing I was considering adding was the ability to change the Pi account password from "innosilicon" to whatever you wanted... The security is basically non-existent on any of these miners anyway, so I don't know if this is that important to anyone, but if it were then I would add it, and the ability to require authentication on the web interface as well - to at least give you the ability to lock things up just a tad if you were so inclined. 

I haven't looked into it in any great detail - I thought I would see first if people had an immediate desire for this option - otherwise I'll just punt it until a later version.
hero member
Activity: 687
Merit: 511
I have a black 110Mhs with 3 fans and a silver 88Mhs with 3 fans, my last buy from Innosilicon are 110Mhs and silver with 5 fans. However the miners with 3 fans have NIDEC 1.6A fans, the miners with 5 fans have 1.4A DELTA fans.

Well, there you have it - there is officially no consistency with A2's!  Wink  I have 15 110's and 13 88's, black cases (all my black ones are 88's), silver cases, short cases, long cases - the only thing that was consistent between them was the 3 fan/5 fan thing, so I assumed that was the easiest indicator, so back to the drawing board as far as figuring out which is which.  The last two I bought from Zoomhash were silver 110's with 5 fans.

Personally, I'm surprised the 110's would run with 3 fans, my 88's run considerably cooler than the 110's, and the 110's run hot with 5 fans, I couldn't imagine running them on 3.  What are the temps like on your black one?
legendary
Activity: 1612
Merit: 1608
精神分析的爸
I have a black 110Mhs with 3 fans and a silver 88Mhs with 3 fans, my last buy from Innosilicon are 110Mhs and silver with 5 fans. However the miners with 3 fans have NIDEC 1.6A fans, the miners with 5 fans have 1.4A DELTA fans.
HTH

legendary
Activity: 2702
Merit: 1030
Yes I am a pirate, 300 years too late!
Yep, already sent a note to ZoomHash, I have never had an issue with them, and I'm sure they will make it right.
hero member
Activity: 687
Merit: 511
That is very strange, mine only has 3 fans!!  Maybe ZoomHash sent me a 88 in error.  This is the 1st silver one I have gotten, the other 2 before were black.

What is even more strange, it came with your firmware on the card!!

Well, I've gotten black, silver, all kinds of cases - those tend to not be a good indicator of what is what.  The 3 fans vs 5 fans has been 100% on all my machines, 3 fans being 88MH, 5 fans being 110MH.  I'm sure there's another method to tell one way or the other, but that's the simple way I use.  

So I would be willing to bet based on the speed it's hashing and the fact it has 3 fans that it's an 88...

It's also worth pointing out that the big "88MH/s" or "110MH/s" that displays on the top of my firmware doesn't mean anything - you set in the config if the machine is 88 or 110, then I use that to estimate the hash rate based on clock rate (and I couldn't figure out a way to query the machine to determine which is was).  So you can tell my firmware it's a 110 (even though it's an 88), and it will display the estimates - but the graphs and the live statistics will show what the actual hash rate is.
legendary
Activity: 2702
Merit: 1030
Yes I am a pirate, 300 years too late!
That is very strange, mine only has 3 fans!!  Maybe ZoomHash sent me a 88 in error.  This is the 1st silver one I have gotten, the other 2 before were black.

What is even more strange, it came with your firmware on the card!!
hero member
Activity: 687
Merit: 511
Loaded the image and it's running fine.  My 110 is only generating about 88 Mh/s though.  That's running at a clock of 1200.

Strange - did you just buy it?  Just wondering, because I've seen a bunch of 88's being sold on eBay as 110's - with all of mine, the 110's all have 5 fans, where the 88's only have the 3 in the front.  I don't know if there are any other obvious physical signs of which are which, but worth noting.

With the firmware you were running before, was it doing 110?
legendary
Activity: 2702
Merit: 1030
Yes I am a pirate, 300 years too late!
Loaded the image and it's running fine.  My 110 is only generating about 88 Mh/s though.  That's running at a clock of 1200.
hero member
Activity: 687
Merit: 511
It does not seem my version because, this one seems to also be for the 12 chip blades (if you look at the name on one of the stats pages). But I have not checked the md5 yet.

Yeah, I noticed that, but it runs fine on all of my Terminators (both 88's and 110's - new and old), so I wasn't sure if it really mattered or not.  Do you have any devices that have a different number of ASIC's?  Since the description is different, it's pretty safe to say the MD5 isn't going to match.  Wink
hero member
Activity: 686
Merit: 500
It does not seem my version because, this one seems to also be for the 12 chip blades (if you look at the name on one of the stats pages). But I have not checked the md5 yet.
hero member
Activity: 687
Merit: 511
Sometime tonight the miner stopped mining and didn't continue automatically.
And the miner lost my pool settings as well. Weird.
But the time it mined it did so very smooth, good work.

I'll try out your new image when it comes out.

The current version is similar to the original one from Innosilicon, and doesn't start back up automatically - that will be in my new version.

Interesting that it lost the pool settings - I save everything in the same way that Innosilicon does, it basically just stores the settings in text files.  It's strange that those both happened at the same time - short of the Pi not saving them to the SD card, I'm not sure how it could happen.

On my new version, I've also been experimenting with disabling the swap and just storing the logs into tmpfs, since they're really not used for anything, and I'd prefer to keep the churn on the SD card to a minimum.  So far on my machines this hasn't caused any issues...

BTW; is the version of cgminer on my firmware one of yours?
hero member
Activity: 686
Merit: 500
Sometime tonight the miner stopped mining and didn't continue automatically.
And the miner lost my pool settings as well. Weird.
But the time it mined it did so very smooth, good work.

I'll try out your new image when it comes out.
hero member
Activity: 687
Merit: 511
heheh, it's coming along.  Most of what I'm doing is general cleanup - for example, periodically the Pi's temperature sensor gives bad values, and it screws up the charts (annoying).  So I've made it so the script checks the temp twice within 5 seconds, and makes sure the two values are relatively close to eachother - and if they aren't, then it dumps the sample, so hopefully this resolves that issue.

I also will probably be making a JSON responding page, for automated control of the A2, that way if anyone wants to script things like clock rate changes, rebooting, etc - there will be one page that does everything.  With that done, it then frees me up to split the one page into a couple, so some of the settings that are never changes are removed.

I've also cleaned up the image some more, so it's smaller and a little easier to manage.  

I've also ordered a Pi2, so I'll be looking into what it takes to get the A2 running off of it - the Pi2 is considerably faster than the original one, plus it's much easier to get so if you have a failure, it would be nice to have something you could just grab off Amazon Prime.

If there are any other feature requests, now's the time to make them!  Wink
newbie
Activity: 13
Merit: 0
Burning your image now to check it out  Grin
Only 11 more days or so until the new image!!! I am stoked this one that is out now is great but it can only get better!
hero member
Activity: 686
Merit: 500
Burning your image now to check it out  Grin
legendary
Activity: 2702
Merit: 1030
Yes I am a pirate, 300 years too late!
My new A2 is on the way from ZoomHash.  Going to throw your image on it as soon as it arrives!!  Hoping for next week!!
hero member
Activity: 687
Merit: 511
Quick update - my next release should be on the first of September... I've got some good new features, a couple of the changes are particularly nice:

Starting of the miner is done with a bootup cron task bound to the system restarting.  I've also modified it so it will auto-restart if cgminer exits for some reason - I have one A2 that has a bad blade, and it periodically stops hashing and you need to manually restart, and this handles it without any user interaction.   Super handy when uptime is important to you - and let's face it, we're mining, so very little is more important than uptime.  Wink  When it does restart, it keeps a log of how many times it had to do recovery restarts, and that is displayed up on the top with the running status - and if you click on it, then it will show you the times that it restarted at.

I now also included ping latency graphs to your gateway, and also to the Internet (Google), so you'll get some idea of how your link is performing, and if there's anything to watch out for.  And the machine uptime and timezone are displayed under the system information.

On a side note, I saw someone selling a Terminator on eBay, and on the screenshot it was running my firmware which brought a smile to my face - pretty cool, especially considering that it's only been available for less than two weeks.  Wink
Pages:
Jump to: