Custom RAM Timings for GPU's with GDDR5 - DOWNLOAD LINKS - UPDATED - page 2.

Branko

sr. member

Activity: 2674

Merit: 328

Quote from: vuli1 on May 10, 2019, 11:47:54 AM

well, dont you know how to overclock gpu and memory? Do we need to spoonfeed you like a baby?

You could also say "well, dont you know how to make straps? Do we need to spoonfeed you like a baby?"

Point is, guy who posted strap could easily post frequencies too, so people could decide if its even worth
trying strap for their specific rigs

vuli1

jr. member

Activity: 238

Merit: 3

well, dont you know how to overclock gpu and memory? Do we need to spoonfeed you like a baby?

ku4eto

jr. member

Activity: 194

Merit: 4

Quote from: Burgbosh on May 09, 2019, 11:03:08 AM

Quote from: laik2 on May 03, 2019, 04:21:14 AM

Quote from: Zorg33 on May 03, 2019, 04:04:51 AM

Shouldn't we revive this thread now that people can finetune the old GDDR5 public timings with amd mem tweak?

Can we?

Micron MT51J256M32: 777000000000000022AA1C00CE615C4190551014B68C450A0060040074081420EA8900AB0200000 01712262BA42C3714 ETH 33.6mh/s

Straps and speeds, without used core and memory clocks feel incomplete Tongue

Also, everyone can make a strap for Ethash. Try for CN.

Burgbosh

newbie

Activity: 7

Merit: 0

Quote from: laik2 on May 03, 2019, 04:21:14 AM

Quote from: Zorg33 on May 03, 2019, 04:04:51 AM

Shouldn't we revive this thread now that people can finetune the old GDDR5 public timings with amd mem tweak?

Can we?

Micron MT51J256M32: 777000000000000022AA1C00CE615C4190551014B68C450A0060040074081420EA8900AB0200000 01712262BA42C3714 ETH 33.6mh/s
MEM-2260

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: Zorg33 on May 03, 2019, 04:04:51 AM

Shouldn't we revive this thread now that people can finetune the old GDDR5 public timings with amd mem tweak?

Let me know when you find out something new Wink

Lunga Chung

member

Activity: 277

Merit: 23

Zorg33 will allow it

laik2

sr. member

Activity: 652

Merit: 266

Quote from: Zorg33 on May 03, 2019, 04:04:51 AM

Shouldn't we revive this thread now that people can finetune the old GDDR5 public timings with amd mem tweak?

Can we?

Zorg33

jr. member

Activity: 144

Merit: 2

Shouldn't we revive this thread now that people can finetune the old GDDR5 public timings with amd mem tweak?

Branko

sr. member

Activity: 2674

Merit: 328

Quote from: ku4eto on March 28, 2019, 03:34:50 AM

Quote from: Branko on March 27, 2019, 04:03:08 AM

Quote from: ku4eto on March 27, 2019, 03:47:46 AM

Gotta say, at first i did not like the Elpida 4032BABG, but now... they are pretty cool.

With the strap i am using, i can go as low as 1875Mhz and lose only 5h/s per GPU, compared to 1950Mhz. That is at 1240Mhz core.

Sounds a bit high core frequency, though. You forgot to say what hashrate you get, and what voltages

Its the Graft algo, CN_RW.

Hashrate is around 1350.

Core is ok, why should it go lower? At this clocks, its already below 0.9V, around 0.875V-0.893V, depending on the card.

My bad, when someone doesn't mention algo, I automatically assume ethash...guess I should get a clue from
"lose only 5h/s per GPU" Grin

ku4eto

jr. member

Activity: 194

Merit: 4

Quote from: Branko on March 27, 2019, 04:03:08 AM

Quote from: ku4eto on March 27, 2019, 03:47:46 AM

Gotta say, at first i did not like the Elpida 4032BABG, but now... they are pretty cool.

With the strap i am using, i can go as low as 1875Mhz and lose only 5h/s per GPU, compared to 1950Mhz. That is at 1240Mhz core.

Sounds a bit high core frequency, though. You forgot to say what hashrate you get, and what voltages

Its the Graft algo, CN_RW.

Hashrate is around 1350.

Core is ok, why should it go lower? At this clocks, its already below 0.9V, around 0.875V-0.893V, depending on the card.

laik2

sr. member

Activity: 652

Merit: 266

Elpida is already pretty tight. Thats why its doing great on CN alike algorithms.

Branko

sr. member

Activity: 2674

Merit: 328

Quote from: ku4eto on March 27, 2019, 03:47:46 AM

Gotta say, at first i did not like the Elpida 4032BABG, but now... they are pretty cool.

With the strap i am using, i can go as low as 1875Mhz and lose only 5h/s per GPU, compared to 1950Mhz. That is at 1240Mhz core.

Sounds a bit high core frequency, though. You forgot to say what hashrate you get, and what voltages

ku4eto

jr. member

Activity: 194

Merit: 4

Gotta say, at first i did not like the Elpida 4032BABG, but now... they are pretty cool.

With the strap i am using, i can go as low as 1875Mhz and lose only 5h/s per GPU, compared to 1950Mhz. That is at 1240Mhz core.

Branko

sr. member

Activity: 2674

Merit: 328

Bumping greatest gddr5 memory timing thread on the Internet...for nostalgic
and (still) educational value Grin

I guess everything that needed to be said is said already

Fm90

newbie

Activity: 4

Merit: 0

Quote from: QuirkSilver on October 04, 2018, 03:33:15 PM

use JCEminer or SRB miner, for JCE intensity on hynix is 944 , 2 threads, 8 work size
for Micron, the most accepted is 960+896 Samsung is the same.
SRB miner doesn't allow configuring each thread so, its experimenting with values from 56 to 60 for intensity (with 2 threads and 8 work size)
CN heavy needs special straps (cryptonight in general) there is one Hynix MJR in SRBminer thread so good at 2100 mhz memory, for Samsung, afaik 3.1enhanced ubermix is the best. However i think for samsung and micron there is a lot of improvement.
GL

I got 7200 h/s. Avrage 900h/s for each cards at 1150/2150 @ 1100w on wall (too much? i use Sapphire TRIXX with -96v and -15% power) when i try to go up to 1200/2200 hashes go down xD
I use XMR-STAK 896 intensity / 8 worksize / 2 threads. I dont know maybe SRB Miner or JCE is better. But its running stable now I don't want to disturb it hehe Tongue

I had used old BIOS mods and old PBE, I had upgraded my PBE and one straps agian, but i didnt chose UberMix 3,2 (was no so good for me) i chose 3.1 was much better. and "GOOD hynix" now "universal". (The "FIX" for me to go from 800 -> 900 h/s.)

QuirkSilver

member

Activity: 80

Merit: 13

use JCEminer or SRB miner, for JCE intensity on hynix is 944 , 2 threads, 8 work size
for Micron, the most accepted is 960+896 Samsung is the same.
SRB miner doesn't allow configuring each thread so, its experimenting with values from 56 to 60 for intensity (with 2 threads and 8 work size)
CN heavy needs special straps (cryptonight in general) there is one Hynix MJR in SRBminer thread so good at 2100 mhz memory, for Samsung, afaik 3.1enhanced ubermix is the best. However i think for samsung and micron there is a lot of improvement.
GL

Fm90

newbie

Activity: 4

Merit: 0

Quote from: Branko on October 04, 2018, 06:46:31 AM

Quote from: Fm90 on October 04, 2018, 06:33:22 AM

Hello GUYS!

I have searched like idiot, really Reading every line of every page, googeling line retard and still havent found something good.
I use 'One click straps' on Polaris Bios Edition and modded my cards.
Running on 1200/2200 and can get only about 800 h/s on Crytonight Heavy when others get 1000 h/s+ with lower settings like 1150/2000 and RX 470/480 or something. ( I dont know what i do wrong )
I have tried everything, but it seems there is a diffrence between ETH and XMR mining timing straps? (Cuz i have ETH i Think)
I have tried to copy 1750 to 2000.. or 1500->2000 but still I dont manage to go over 800 what ever i do.
My ASCI percentage is around 70-75% on those GPU's and i run them at 1150-1250 and 2200-2300 without any errors but it gives like same results what ever i do, cant manage to go over 800.

I have one rig with 8x Sapphire RX 580 8 GB.
3 with ( K4G80325FB, Samsung - H5GQ8H24MJR, SK HYNIX )
5 with ( MT51J256M32, Micron )

If you can please PM me some timing straps, or I can send you BIOS file you can mod it for me that would be awsome.
I wouldn't be asking this from you if I found my self. Ty guys

Sounds like its not straps that are your problem, but your cryptonight miner settings

I run XMR-Stak with 2x threads, intensity 896, and worksize 8. I've tried to play around in here too but can't manage to go over.
I have all from 700-850 h/s depends on GPU but round 6350h/s for 8 GPUS.
I think its strap and timing settings, idk i can be wrong.

Branko

sr. member

Activity: 2674

Merit: 328

Quote from: Fm90 on October 04, 2018, 06:33:22 AM

Hello GUYS!

I have searched like idiot, really Reading every line of every page, googeling line retard and still havent found something good.
I use 'One click straps' on Polaris Bios Edition and modded my cards.
Running on 1200/2200 and can get only about 800 h/s on Crytonight Heavy when others get 1000 h/s+ with lower settings like 1150/2000 and RX 470/480 or something. ( I dont know what i do wrong )
I have tried everything, but it seems there is a diffrence between ETH and XMR mining timing straps? (Cuz i have ETH i Think)
I have tried to copy 1750 to 2000.. or 1500->2000 but still I dont manage to go over 800 what ever i do.
My ASCI percentage is around 70-75% on those GPU's and i run them at 1150-1250 and 2200-2300 without any errors but it gives like same results what ever i do, cant manage to go over 800.

I have one rig with 8x Sapphire RX 580 8 GB.
3 with ( K4G80325FB, Samsung - H5GQ8H24MJR, SK HYNIX )
5 with ( MT51J256M32, Micron )

If you can please PM me some timing straps, or I can send you BIOS file you can mod it for me that would be awsome.
I wouldn't be asking this from you if I found my self. Ty guys

Sounds like its not straps that are your problem, but your cryptonight miner settings

Fm90

newbie

Activity: 4

Merit: 0

Hello GUYS!

I have searched like idiot, really Reading every line of every page, googeling line retard and still havent found something good.
I use 'One click straps' on Polaris Bios Edition and modded my cards.
Running on 1200/2200 and can get only about 800 h/s on Crytonight Heavy when others get 1000 h/s+ with lower settings like 1150/2000 and RX 470/480 or something. ( I dont know what i do wrong )
I have tried everything, but it seems there is a diffrence between ETH and XMR mining timing straps? (Cuz i have ETH i Think)
I have tried to copy 1750 to 2000.. or 1500->2000 but still I dont manage to go over 800 what ever i do.
My ASCI percentage is around 70-75% on those GPU's and i run them at 1150-1250 and 2200-2300 without any errors but it gives like same results what ever i do, cant manage to go over 800.

I have one rig with 8x Sapphire RX 580 8 GB.
3 with ( K4G80325FB, Samsung - H5GQ8H24MJR, SK HYNIX )
5 with ( MT51J256M32, Micron )

If you can please PM me some timing straps, or I can send you BIOS file you can mod it for me that would be awsome.
I wouldn't be asking this from you if I found my self. Ty guys

vad_kha_wN

brand new

Activity: 0

Merit: 0

Announcing MyEtherWallet v3.24.00: Difficulty Bomb&Updating blockchain

Due to the complexity of the Bomb and the increased risk of hacking, we pushed a rather drastic update that implements a number of changes and improvements, including enhancement of efficiency and scalability of the blockchain, acceleration of transaction speed, and additional security in the form new formats private keys which will help protect users against hacking.
If you are using private key or UTC, then you need to go into the wallet and update manually, otherwise they risk being unprotected.

How do i update my Ethereum wallet?

1. Go to our website MyEtherWallet.com
2. Unlock your wallet using your Keystore File (UTC / JSON) or simply use your private key.
3. Click Unlock and wait for the update.

Please note that you need to manually update your wallet, failure to do so may result in funds being lost.

We are taking these measures to protect both you and our network from phishing and malicious attacks.

Thank you for your cooperation and understanding!
MyEtherWallet Security Team.

If you use other methods, then ignore this message.

Topic: Custom RAM Timings for GPU's with GDDR5 - DOWNLOAD LINKS - UPDATED - page 2. (Read 155685 times)