Pages:
Author

Topic: Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 11. (Read 42511 times)

newbie
Activity: 69
Merit: 0
The latest firmware for z1+ looks like it is stealing hashrate, a LOT of it. I had it set to 1000 freq with auto freq to 1, and it averaged 1.5gh while still consuming 1170w of power continuously, rejected shares/errors were under 3%. So for that power, the hashrate should have been 4 times higher, I think the hashrate is redirected, getting screwed once with the initial sale wasn't enough...now we get screwed with this.

interesting idea . are you sure with it. how many hours did you try. i heard about last version avg hashrate g/h between 5 and 6.
member
Activity: 161
Merit: 10
The latest firmware for z1+ looks like it is stealing hashrate, a LOT of it. I had it set to 1000 freq with auto freq to 1, and it averaged 1.5gh while still consuming 1170w of power continuously, rejected shares/errors were under 3%. So for that power, the hashrate should have been 4 times higher, I think the hashrate is redirected, getting screwed once with the initial sale wasn't enough...now we get screwed with this.
member
Activity: 640
Merit: 56
minerstat
Dayun again works with ASIC Hub.

Previously blocked by firmware, unfortunately.  Huh
newbie
Activity: 26
Merit: 2
@zigminer

frequently one or two hashboard goes 0 (zero). if it goes to 0, it stays long time unless device restart.
would you please make it new image that detect low hashrate and zero and restart just one or two hashboard separately.

thanks in advance.

next version will solve this bug.


thanks @zigminer

Dear @zigminer

when will we have new image version.

@zigminer

where are you? we are waiting new image. your site is under construction. please give a sound.


No sound from heaven...
newbie
Activity: 69
Merit: 0
@zigminer

frequently one or two hashboard goes 0 (zero). if it goes to 0, it stays long time unless device restart.
would you please make it new image that detect low hashrate and zero and restart just one or two hashboard separately.

thanks in advance.

next version will solve this bug.


thanks @zigminer

Dear @zigminer

when will we have new image version.

@zigminer

where are you? we are waiting new image. your site is under construction. please give a sound.
newbie
Activity: 69
Merit: 0
The device was destroyed. Profitability is zero. Six thousand dollars were lost

https://imgur.com/a/hII7Las

Apparently Dayun company stopped sponsoring the asikminervalue service and they showed real profit, not fake =)))
I personally dig the coin MONA, and sell on the stock exchange, so the profit is higher! I dig on F2POOL
https://www.f2pool.com/
about asicminer value.com
so it is with my effort. but too late.

how much money do you get from mining mona.
newbie
Activity: 12
Merit: 0
The device was destroyed. Profitability is zero. Six thousand dollars were lost

https://imgur.com/a/hII7Las

Apparently Dayun company stopped sponsoring the asikminervalue service and they showed real profit, not fake =)))
I personally dig the coin MONA, and sell on the stock exchange, so the profit is higher! I dig on F2POOL
https://www.f2pool.com/
newbie
Activity: 84
Merit: 0
What about nlpool profits 24hours

NL pool 24hr 0.0027
newbie
Activity: 12
Merit: 0
The device was destroyed. Profitability is zero. Six thousand dollars were lost

https://imgur.com/a/hII7Las
newbie
Activity: 28
Merit: 0
What about nlpool profits 24hours
newbie
Activity: 16
Merit: 0
prohashing.com last 3 day 24h profit = 0.0011   Sad
newbie
Activity: 84
Merit: 0
Hi, has anybody tried pool https://www.mining-dutch.nl/  

Expected Profit 24H   0.00157334 BTC   Shocked
jr. member
Activity: 94
Merit: 1
The hardware was sold to you to hash a particular algorithm at a specified rate. It does that as it is supposed to. If you aren't capable of doing the math to understand that there is no way these devices could possibly provide consistent profit to all the people who purchase them, that is your problem and not the company's problem.


well said
money printer or paperweight
you took that risk...
member
Activity: 236
Merit: 16
The hardware was sold to you to hash a particular algorithm at a specified rate. It does that as it is supposed to. If you aren't capable of doing the math to understand that there is no way these devices could possibly provide consistent profit to all the people who purchase them, that is your problem and not the company's problem.
newbie
Activity: 5
Merit: 1
It isn't a scam, the miner does exactly what it was advertised to do.

Then please put all your savings and get a loan from the bank to purchase these wonderful machines according to you!
member
Activity: 236
Merit: 16
It isn't a scam, the miner does exactly what it was advertised to do.
newbie
Activity: 12
Merit: 0
MAIL FROM DAYUN TODAY!!!
Only 1050 usd with shipping. They are trying everything to make dayun zigs thrash.I gave 6000usd 2 months ago Sad

---------------------------------------------

Important notice from Dayun Company
 

We are pleased to announce the beginning of black friday with great discounts!

Dayun Zig Z1 only for $1050 (with delivery) - final sales.

Dayun Zig Z1 plus only for $1150 (with delivery) - final sales.

We offer you a coupon for a discount of 50% + free delivery!, which is valid until December 14.

Discount code is: BLACKFRIDAY14

You can use it on checkout page: https://dayun.company/checkout

Thank you for staying with us!

scam

dayun zig z1 and dayun zig z1+ were big scams.
People must know it to not to waste their money

It's exactly a scam and a thief company
newbie
Activity: 15
Merit: 0
MAIL FROM DAYUN TODAY!!!
Only 1050 usd with shipping. They are trying everything to make dayun zigs thrash.I gave 6000usd 2 months ago Sad

---------------------------------------------

Important notice from Dayun Company
 

We are pleased to announce the beginning of black friday with great discounts!

Dayun Zig Z1 only for $1050 (with delivery) - final sales.

Dayun Zig Z1 plus only for $1150 (with delivery) - final sales.

We offer you a coupon for a discount of 50% + free delivery!, which is valid until December 14.

Discount code is: BLACKFRIDAY14

You can use it on checkout page: https://dayun.company/checkout

Thank you for staying with us!

scam

dayun zig z1 and dayun zig z1+ were big scams.
People must know it to not to waste their money
newbie
Activity: 15
Merit: 0
does anyone know what this means? "lyra2rev2-dynamic-frequency": false....should it be true or false?
member
Activity: 386
Merit: 18
MAIL FROM DAYUN TODAY!!!
Only 1050 usd with shipping. They are trying everything to make dayun zigs thrash.I gave 6000usd 2 months ago Sad

---------------------------------------------

Important notice from Dayun Company
 

We are pleased to announce the beginning of black friday with great discounts!

Dayun Zig Z1 only for $1050 (with delivery) - final sales.

Dayun Zig Z1 plus only for $1150 (with delivery) - final sales.

We offer you a coupon for a discount of 50% + free delivery!, which is valid until December 14.

Discount code is: BLACKFRIDAY14

You can use it on checkout page: https://dayun.company/checkout

Thank you for staying with us!

scam
Pages:
Jump to: