Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 34.

Yezzzuurrr

newbie

Activity: 37

Merit: 0

Quote from: alex.asic on November 01, 2018, 03:15:56 AM

Thank you i had forgotten about that write up. ill set the temp limit and see how we go.

Quote from: streenip on November 01, 2018, 02:48:30 AM

Quote from: alex.asic on November 01, 2018, 02:07:03 AM

Gday gents. being in Australia we get some hot temps. today was the first day over 30 in my area. My miners have been shutting down. first on 950 auto and now on 900 auto. Iam assuming that when the temps stay over 50 degrees it will shut off. Looking at the json file it is set to shutdown at 50 degress. has any one changed the temp to 60 or higher? Iam running the 9.30 software. Or do you reckon re doing the thermal paste will help out enough? The miners are in my garage which isn't plastered so has ok air movement. Thanks.

Hi, go to the message thread #174...I used these settings suggested by Mordred for my Z1+ and it works as my machine core temperature gets to 52-53 degrees Celsius but it still runs fine.

On the auto stop which settings do you use for the fans? lowerfanspeed in and lowerfanspeed out

alex.asic

newbie

Activity: 49

Merit: 0

Thank you i had forgotten about that write up. ill set the temp limit and see how we go.

Quote from: streenip on November 01, 2018, 02:48:30 AM

Quote from: alex.asic on November 01, 2018, 02:07:03 AM

Gday gents. being in Australia we get some hot temps. today was the first day over 30 in my area. My miners have been shutting down. first on 950 auto and now on 900 auto. Iam assuming that when the temps stay over 50 degrees it will shut off. Looking at the json file it is set to shutdown at 50 degress. has any one changed the temp to 60 or higher? Iam running the 9.30 software. Or do you reckon re doing the thermal paste will help out enough? The miners are in my garage which isn't plastered so has ok air movement. Thanks.

Hi, go to the message thread #174...I used these settings suggested by Mordred for my Z1+ and it works as my machine core temperature gets to 52-53 degrees Celsius but it still runs fine.

streenip

jr. member

Activity: 39

Merit: 1

Quote from: alex.asic on November 01, 2018, 02:07:03 AM

Gday gents. being in Australia we get some hot temps. today was the first day over 30 in my area. My miners have been shutting down. first on 950 auto and now on 900 auto. Iam assuming that when the temps stay over 50 degrees it will shut off. Looking at the json file it is set to shutdown at 50 degress. has any one changed the temp to 60 or higher? Iam running the 9.30 software. Or do you reckon re doing the thermal paste will help out enough? The miners are in my garage which isn't plastered so has ok air movement. Thanks.

Hi, go to the message thread #174...I used these settings suggested by Mordred for my Z1+ and it works as my machine core temperature gets to 52-53 degrees Celsius but it still runs fine.

alex.asic

newbie

Activity: 49

Merit: 0

Gday gents. being in Australia we get some hot temps. today was the first day over 30 in my area. My miners have been shutting down. first on 950 auto and now on 900 auto. Iam assuming that when the temps stay over 50 degrees it will shut off. Looking at the json file it is set to shutdown at 50 degress. has any one changed the temp to 60 or higher? Iam running the 9.30 software. Or do you reckon re doing the thermal paste will help out enough? The miners are in my garage which isn't plastered so has ok air movement. Thanks.

topoolscom

newbie

Activity: 24

Merit: 0

topools.com

Quote from: deneme12 on October 31, 2018, 09:10:38 PM

Quote from: streenip on October 31, 2018, 12:31:50 PM

It’s 1:30 am in China, any improvement on the income?

Discount coupon is valid until 31 october. Why not november? Because 1st of november nothing will change and people will mark them as a lier. I wrote before write a review for zig 1 in dayun.company and see what happens when they publish. They write good words and 5 star and use your name like it is yours. Never trust any of their words...

I think dayun.company is not Z1 official website.

deneme12

newbie

Activity: 8

Merit: 0

Quote from: streenip on October 31, 2018, 12:31:50 PM

It’s 1:30 am in China, any improvement on the income?

Discount coupon is valid until 31 october. Why not november? Because 1st of november nothing will change and people will mark them as a lier. I wrote before write a review for zig 1 in dayun.company and see what happens when they publish. They write good words and 5 star and use your name like it is yours. Never trust any of their words...

esol

jr. member

Activity: 41

Merit: 6

hi, my Z1 stopped mining suddenly as I've discovered the dashboard reports outtake fan speed to "0"

of course the fan is connected and running, but most likely the logic board don't recognise anymore the RPM sensor. Some component possibly has gone...

any idea how to set by software to avoid FAN speed check?

any other idea?
thanks!
/E

xs.over

full member

Activity: 376

Merit: 103

Quote from: streenip on October 31, 2018, 12:31:50 PM

It’s 1:30 am in China, any improvement on the income?

Remember a simple thing: nowadays mainly only miming hardware manufacturers and hardware resellers earn money in crypto mining sphere.

streenip

jr. member

Activity: 39

Merit: 1

It’s 1:30 am in China, any improvement on the income?

alex.asic

newbie

Activity: 49

Merit: 0

Thanks for that. Not worth buying unless almost free electricity it seems.

Quote from: ?? on ??

Quote from: alex.asic on October 30, 2018, 08:01:11 PM

New miner from Dayun listed here. Any info? Says its a x11 miner 48GH/s

https://www.zigminer.com/miner.html

Yes ,it is new Dayun miner called Dayun Zig D1 ,x11 miner 48GH/s ,more details you will find from here :

https://www.akminer.com/all-products/new-dayun-x11-d1-ship-now

Tarlatata

jr. member

Activity: 102

Merit: 2

Quote from: alex.asic on October 30, 2018, 08:01:11 PM

New miner from Dayun listed here. Any info? Says its a x11 miner 48GH/s

https://www.zigminer.com/miner.html

Nice catch. Tomax is looking at avaibility/specs for me right now.

vcon

newbie

Activity: 1

Merit: 0

Has anyone found a way to enable SSH on the Z1+?

alex.asic

newbie

Activity: 49

Merit: 0

New miner from Dayun listed here. Any info? Says its a x11 miner 48GH/s

https://www.zigminer.com/miner.html

Tarlatata

jr. member

Activity: 102

Merit: 2

Quote from: streenip on October 30, 2018, 12:54:40 PM

Quote from: Bitreo on October 30, 2018, 11:34:46 AM

Quote from: streenip on October 30, 2018, 08:49:12 AM

Saw few comments about the core temperature on the interface, my Z1+ runs in a range from 47-52 degrees Celsius. The temperature in Johannesburg has been around the 35 degree mark over the past few days. Is this okay or should I be concerned?

Hi

what it like there in JHB with power cuts and stuff, how you manage the downtime when no electricity ? also whats the going price for electricity now ?

just curious, didnt think there would be a lot of people willing to mine crypto in SA.

Regards
bitreo

The power grid has stabilized a bit so the power cuts are minimal, but still happens...when you least expect it to. Considering a solar solution to mitigate the power risk but that also comes a massive cost. The cost of electricity works on a step pricing scale. On average it starts from $0.12 p/kw and it increases with usage. This machine will cost around $140 pm. Mining is a bit expensive here. Just to give you an idea, the Z1+ sells for around $8800, due to all the taxes and the week Rand. Then add the power challenges, poor internet stability and trading fees. So you need to know what you are doing and the ROI takes 2 or 3 times longer than the many other countries.

Are you an ex-South African?

Well, you might be interested in what I have been starting lately.

Gstamato3113

newbie

Activity: 12

Merit: 0

hello to everyone

i bought the 23/10/2018 Z1+. from the very first beginning i started to use it at nicehash pool. the problem is the it never-never go on average above 6,57gh/s. they promised 7.2gh/s. wtf is going on here?

i overclocked it to 1150 frequency. nothing was improved. i overclocked it with putting auto frequency to "1" at miner.json file. again nothing happened.

i dont know what to do to increase the hashing. this is rediculous. from the asicminervalue.com profit prediction, i am behind 3-4 euros.

can you please advise how can we overclock this thing?

i am using 20181015 firmware. it came with this firmware installed.

do you think i have a difesient asic miner? is it problematic or it is natural this hash rate?

at what gh/s do you have your Z1+. please reply only those who have Z1+

streenip

jr. member

Activity: 39

Merit: 1

Quote from: streenip on October 30, 2018, 12:54:40 PM

Quote from: Bitreo on October 30, 2018, 11:34:46 AM

Quote from: streenip on October 30, 2018, 08:49:12 AM

Saw few comments about the core temperature on the interface, my Z1+ runs in a range from 47-52 degrees Celsius. The temperature in Johannesburg has been around the 35 degree mark over the past few days. Is this okay or should I be concerned?

Hi

what it like there in JHB with power cuts and stuff, how you manage the downtime when no electricity ? also whats the going price for electricity now ?

just curious, didnt think there would be a lot of people willing to mine crypto in SA.

Regards
bitreo

The power grid has stabilized a bit so the power cuts are minimal, but still happens...when you least expect it to. Considering a solar solution to mitigate the power risk but that also comes a massive cost. The cost of electricity works on a step pricing scale. On average it starts from $0.12 p/kw and it increases with usage. This machine will cost around $140 pm. Mining is a bit expensive here. Just to give you an idea, the Z1+ sells for around $8800, due to all the taxes and the week Rand. Then add the power challenges, poor internet stability and trading fees. So you need to know what you are doing and the ROI takes 2 or 3 times longer than the many other countries.

Are you an ex-South African?

Also considering using a hosting service, in SA Not too many miners...evident through the lack of interest when mining machines go up for sale.

streenip

jr. member

Activity: 39

Merit: 1

Quote from: Bitreo on October 30, 2018, 11:34:46 AM

Quote from: streenip on October 30, 2018, 08:49:12 AM

Saw few comments about the core temperature on the interface, my Z1+ runs in a range from 47-52 degrees Celsius. The temperature in Johannesburg has been around the 35 degree mark over the past few days. Is this okay or should I be concerned?

Hi

what it like there in JHB with power cuts and stuff, how you manage the downtime when no electricity ? also whats the going price for electricity now ?

just curious, didnt think there would be a lot of people willing to mine crypto in SA.

Regards
bitreo

The power grid has stabilized a bit so the power cuts are minimal, but still happens...when you least expect it to. Considering a solar solution to mitigate the power risk but that also comes a massive cost. The cost of electricity works on a step pricing scale. On average it starts from $0.12 p/kw and it increases with usage. This machine will cost around $140 pm. Mining is a bit expensive here. Just to give you an idea, the Z1+ sells for around $8800, due to all the taxes and the week Rand. Then add the power challenges, poor internet stability and trading fees. So you need to know what you are doing and the ROI takes 2 or 3 times longer than the many other countries.

Are you an ex-South African?

Bitreo

newbie

Activity: 14

Merit: 0

Quote from: streenip on October 30, 2018, 08:49:12 AM

Saw few comments about the core temperature on the interface, my Z1+ runs in a range from 47-52 degrees Celsius. The temperature in Johannesburg has been around the 35 degree mark over the past few days. Is this okay or should I be concerned?

Hi

what it like there in JHB with power cuts and stuff, how you manage the downtime when no electricity ? also whats the going price for electricity now ?

just curious, didnt think there would be a lot of people willing to mine crypto in SA.

Regards
bitreo

streenip

jr. member

Activity: 39

Merit: 1

Saw few comments about the core temperature on the interface, my Z1+ runs in a range from 47-52 degrees Celsius. The temperature in Johannesburg has been around the 35 degree mark over the past few days. Is this okay or should I be concerned?

metnet

newbie

Activity: 69

Merit: 0

Quote from: OurManInHavana on October 30, 2018, 06:36:44 AM

If you ordered a Z1+, but they sent you a Z1... how would you know? (Outside is identical?). Is the difference really only firmware?

interface shows you what is z1+ or z1. in the other hand both devices almost the same. they changed some software configuration files.

Topic: Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 34. (Read 42511 times)