Pages:
Author

Topic: Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 36. (Read 42511 times)

jr. member
Activity: 39
Merit: 1
I just got the Zig Z1+ with firmware 20181015 firmware for days ago. Had to change my router to 192.168.1.1 to be able to log in.

While I can log and set the parameters for Nicehash and log into the interface it always says offline and dashboard says "Miner may not start".

Anyone else got a Zig Z1+ working on 20181015 firmware?

Otherwise, I might have a bad unit.

I also have the Z1+ with the 15 October firmware which I received this past Thursday. Also struggled with the IP but once I changed IP range on DHCP, it found the Z1+ it works fine
newbie
Activity: 3
Merit: 0
I just got the Zig Z1+ with firmware 20181015 firmware for days ago. Had to change my router to 192.168.1.1 to be able to log in.

While I can log and set the parameters for Nicehash and log into the interface it always says offline and dashboard says "Miner may not start".

Anyone else got a Zig Z1+ working on 20181015 firmware?

Otherwise, I might have a bad unit.
jr. member
Activity: 39
Merit: 1
asicminervalue indicates income of $24,03 for the Z1+ However I am only getting around $20 through NiceHash. Any recommendations on a pool where I can get the full value
jr. member
Activity: 102
Merit: 2
Hi Streeni ,thanks for your kindly supports and trust to AKminer.com .
Also here we had the first batch NEW Baikal G28 in hands ,
https://www.akminer.com/all-products/new-baikal-miner-bk-g28-ship-now
Welcome to group buying and we will talk to Baikal factory directly to get best wholesale prices for serious buyers in this thread .

You say you have them in hands, that mean shipping the same day of payment ?
newbie
Activity: 21
Merit: 0
i many time Flashing with UDisk , and don't have problem , if you have problem  with UDisk , coming to whatsApp Group and give help

https://chat.whatsapp.com/DaHV50fCmrF837Gr7QPWUA

Was anyone successful in flashing one of the version (20180930 - 20181015) onto a new usb and having it work?

If so, did you do anything special appart from using udisk ?

Here's how I messed up. I only went to login screen the first time. I tried the root/envision some people gave but it wouldn't login.

I then switched the usb to my PC to see if I could disable the password but got welcomed with a "you need to format this drive".

Test on 3 more pc, same result.

Tested again the miner, couldn't get in.

I've decided to flash the latest version, but now no matter what I try, I can't see my miner since I wiped the usb that came with it to try and upgrade it.
jr. member
Activity: 102
Merit: 2
Well, they provide a program (made by a known team) to either flash some boot file to the usb or to extract them (make a copy on your pc)

http://download.zigminer.com/

http://prntscr.com/laxnoq

If you feel adventurous enough to stop your miner, I'll be real happy to get this file Smiley
jr. member
Activity: 39
Merit: 1
Was anyone successful in flashing one of the version (20180930 - 20181015) onto a new usb and having it work?

If so, did you do anything special appart from using udisk ?

Here's how I messed up. I only went to login screen the first time. I tried the root/envision some people gave but it wouldn't login.

I then switched the usb to my PC to see if I could disable the password but got welcomed with a "you need to format this drive".

Test on 3 more pc, same result.

Tested again the miner, couldn't get in.

I've decided to flash the latest version, but now no matter what I try, I can't see my miner since I wiped the usb that came with it to try and upgrade it.

Check if a Tomax can help as they are a massive supplier of miners and they may have a relationship with DaYun as well. Maybe they can drop the entire usb drive contents on a zip file and send to you. I am not that technical else I would have tried to help. As mentioned is my previous post, I struggled to set up the IP and when I got it running I haven’t touched it. Also, my hash rate varies from 2.5 to 7.5 GH/S and I did read a post that deals with that but I am going to settle for my $20 per day and not touch the machine. Also saw the temperature running at 50 degrees for the core and the 4 units were running at around 69 degrees as my garage gets very hot and this machine throws out lots of heat. Not too sure if there is a risk with that so please let me know
jr. member
Activity: 102
Merit: 2
Was anyone successful in flashing one of the version (20180930 - 20181015) onto a new usb and having it work?

If so, did you do anything special appart from using udisk ?

Here's how I messed up. I only went to login screen the first time. I tried the root/envision some people gave but it wouldn't login.

I then switched the usb to my PC to see if I could disable the password but got welcomed with a "you need to format this drive".

Test on 3 more pc, same result.

Tested again the miner, couldn't get in.

I've decided to flash the latest version, but now no matter what I try, I can't see my miner since I wiped the usb that came with it to try and upgrade it.
member
Activity: 236
Merit: 16
to Zig owners,

do not use untrusted or untested image. because some of them usually have phpbash.php, cc99 and powny. they are illegal software or scripts.
some of them has extra user like pi or fa. please be attention of these.



phpbash and pi/fa users are present in the factory image.
jr. member
Activity: 39
Merit: 1
Hi,

Did anybody buy from these guys:

http://www.dayunmining.com/

Claim to be direct manufacturer

Any thoughts?



They are not.  And the prices alone suggest it is a scam.

Look...Almost the same page... https://dayun.company/

I bought my Z1+ from Akminer.com. I suggest you WhatsApp them for a price as they delivered within 3 days and also helped me with customs. I will definitely buy from them again

The machine had been running for just over 23 hrs for $20.
jr. member
Activity: 39
Merit: 1
Hi,

Did anybody buy from these guys:

http://www.dayunmining.com/

Claim to be direct manufacturer

Any thoughts?



They are not.  And the prices alone suggest it is a scam.

Look...Almost the same page... https://dayun.company/

I bought my Z1+ from Akminer.com. I suggest you WhatsApp them for a price as they delivered within 3 days and also helped me with customs. I will definitely buy from them again
jr. member
Activity: 178
Merit: 2
Hi,

Did anybody buy from these guys:

http://www.dayunmining.com/

Claim to be direct manufacturer

Any thoughts?



They are not.  And the prices alone suggest it is a scam.

Look...Almost the same page... https://dayun.company/
newbie
Activity: 42
Merit: 0
Hi,

Did anybody buy from these guys:

http://www.dayunmining.com/

Claim to be direct manufacturer

Any thoughts?

jr. member
Activity: 70
Merit: 1
What The best currency to Mining is with the current conditions?
Which pool is better?

I'm mining in nicehash pool
Today's profit fell to $ 18

Conditions are not good at all

Did you check on WhatToMine? --> https://bit.ly/2JnwpNv

Or did you check ShitToMine? (sorry, could not shorten this link) ---> https://shittomine.com/calculator/?rtx2080ti=>x10606GB=&rtx2080=>x10603GB=>x1080ti=>x1050ti=>x1080=>x1050=>x1070ti=>x1070=&vega64=&vega56=&radeon580=&radeon570=&radeon480=&radeon470=&aergo=&power_aergo=&allium=&power_allium=&argon2d=&power_argon2d=&axiom=&power_axiom=&balloon=&power_balloon=&blake256r8vnl=&power_blake256r8vnl=&blake2s=&power_blake2s=&c11=&power_c11=&cryptonightlite=&power_cryptonightlite=&cryptonightb2n=&power_cryptonightb2n=&cryptonightheavy=&power_cryptonightheavy=&cryptonightsaber=&power_cryptonightsaber=&cryptonightv7=&power_cryptonightv7=&cryptonightv8=&power_cryptonightv8=&cuckoo=&power_cuckoo=&dmdgr=&power_dmdgr=&equihash1445=&power_equihash1445=&equihash1927=&power_equihash1927=&equihash965=&power_equihash965=ðash=&power_ethash=&exosis=&power_exosis=&groestl=&power_groestl=&heavy3=&power_heavy3=&hex=&power_hex=&hmq1725=&power_hmq1725=&hsr=&power_hsr=&keccak=&power_keccak=&keccakc=&power_keccakc=&lbk3=&power_lbk3=&lyra2re=&power_lyra2re=&lyra2z=&power_lyra2z=&neoscrypt=&power_neoscrypt=&phi=&power_phi=&phi2=&power_phi2=&polytimos=&power_polytimos=&progpow=&power_progpow=&renesis=&power_renesis=&scryptnf=&power_scryptnf=&sha224=&power_sha224=&skunk=&power_skunk=&soliditysha3=&power_soliditysha3=&sonoa=&power_sonoa=&timetravel=&power_timetravel=&timetravel10=&power_timetravel10=&tribus=&power_tribus=&trihash=&power_trihash=&whirlpoolx=&power_whirlpoolx=&x11evo=&power_x11evo=&bcd=&power_bcd=&x16r=&power_x16r=&x16s=&power_x16s=&x17=&power_x17=&x22i=&power_x22i=&xevan=&power_xevan=&yescrypt=&power_yescrypt=&blake14r=&power_blake14r=&blake256=&power_blake256=&blake256r8=&power_blake256r8=&blake2b=&power_blake2b=&brick2b=&power_brick2b=&cryptonight=&power_cryptonight=&equihash=&power_equihash=&lbry=&power_lbry=&select_lyra2v2=1&lyra2v2=6800&power_lyra2v2=1200&myriadgroestl=&power_myriadgroestl=&nist5=&power_nist5=&pascal=&power_pascal=&quark=&power_quark=&qubit=&power_qubit=&scrypt=&power_scrypt=&sha256=&power_sha256=&skein=&power_skein=&tensority=&power_tensority=&x11=&power_x11=&x11gost=&power_x11gost=&x12=&power_x12=&x13=&power_x13=&x14=&power_x14=&x15=&power_x15=&argon2id=&power_argon2id=&geek=&power_geek=&hodl=&power_hodl=&jad8=&power_jad8=&scryptjanenf16=&power_scryptjanenf16=&sha256t=&power_sha256t=&yescryptr16=&power_yescryptr16=&yescryptr32=&power_yescryptr32=&power=&price=bid&cost=0.0713&exchange=exchange_24h&btc=6411.77&selectdifficulty=difficulty_24h&devise=USD&volume_display=TEXT&volume_minimum=LOW&get=get&submit=Calculate

The profit for this miner is gone and won't come back.
newbie
Activity: 21
Merit: 0
What The best currency to Mining is with the current conditions?
Which pool is better?

I'm mining in nicehash pool
Today's profit fell to $ 18

Conditions are not good at all
newbie
Activity: 69
Merit: 0
to Zig owners,

do not use untrusted or untested image. because some of them usually have phpbash.php, cc99 and powny. they are illegal software or scripts.
some of them has extra user like pi or fa. please be attention of these.

newbie
Activity: 21
Merit: 0
Hi guys

How i can edit IMG file of zigminer ?
i opening this file with ultraISO But Only show 40MB disk, and don't show another Drive

I Want change login Page & login Picture
jr. member
Activity: 39
Merit: 1
Well, Tomax is the provider I actually used.

0.66 BTC vs the 4600$ of akminer still leave me a good 300-400$ cheaper product depending on where I was looking for the price. Google was also showing 6215$ exactly while binance was showing 6310ish.

By the way, do not do the newbie like me and do not try to immediatly flash latest version. If you do want to flash it on the usb, user another drive, not the default. I managed to see the miner login page before flashing it and now I'm stuck as I don't have the default version.


I'd suggest going to http://download.zigminer.com/ and downloading the udisk tool and make a backup of your usb. Oh and if you can send me a link for it afterward, I'd appreciate it Wink

This is my first miner so I struggled with sorting the IP but when I sorted that out and register with NiseHash everything ran smoothly. Also using the 15 October update and getting on average of 6.5 GH/S
jr. member
Activity: 102
Merit: 2
Well, Tomax is the provider I actually used.

0.66 BTC vs the 4600$ of akminer still leave me a good 300-400$ cheaper product depending on where I was looking for the price. Google was also showing 6215$ exactly while binance was showing 6310ish.

By the way, do not do the newbie like me and do not try to immediatly flash latest version. If you do want to flash it on the usb, user another drive, not the default. I managed to see the miner login page before flashing it and now I'm stuck as I don't have the default version.


I'd suggest going to http://download.zigminer.com/ and downloading the udisk tool and make a backup of your usb. Oh and if you can send me a link for it afterward, I'd appreciate it Wink
jr. member
Activity: 39
Merit: 1
@streenip

0.66 BTC (it was just before miner profitability drop) for 4215$ instead of the 5000+ that was listed on asicminervalue and the 4599$ that akminer was quoting me for purchasing 5+ unit.

And that was price for a single unit.

Add about 55$ usd duty fee (74.50$ cad)

Total 4270$.

Anyone happen to have a copy of the flash drive ?

I tried on 3 pc and each says I need to format the drive, but I could get to the login screen when going to the IP of the miner. I'd copy it onto another drive and see if I can work to put my address into the files instead of trying to find the root pwd for Z1+

Edit:

I found the download of different drivers. Trying with the 20181015 to see what happens.

Nope, that's a no go. Red light goes on for a few second before going for for 10-20 second, then back on, slowly flashing like this.

Tried with 20181015 on 3 different usb just to be sure.

Now trying the 20180930 overclocking to see if my Z1+ will come alive.

Thanks, that is an excellent price but this is where I have a problem...when you change that value to BTC it comes out much more than they quoted you. An example, I agreed to a price of $4220 (they added $20 more for the Bitmain PSU) with Tomax and they declined trade assurance due to being a new product. Then their payment options meant coverting a poor performing ZAR(check my previous feedback) to dollars. Nonetheless, I bought BTC and then did a conversion using huobipro.com which equates to $4220/$6574=0.642BTC. Tomax disagreed with the figure and insisted on charging 0.667BTC which increased the price to $4382, using my logic and calculations. I asked for the exchange they were using so we could work off the same platform...still waiting. Similarly I left them hanging.

I eventually settled for AKMiner, although at a higher price but I wasn’t getting the run around.
Pages:
Jump to: