Pages:
Author

Topic: [DiceBitco.in] [Make the most out of your sig!] Make coins by simply posting! - page 33. (Read 26843 times)

legendary
Activity: 1274
Merit: 1000
SomeoneInNeed
Posts: 81
BTC: *will provide later

Sorry but you can not join:
If you are scammer/with negative trust you cannot enroll.


You need to fix your sig Holdaaja ! You using the wrong size Smiley

What?
I'm full member and I copied the full mebmer sig...
I can't see what is wrong with it Embarrassed
copper member
Activity: 3948
Merit: 2201
Verified awesomeness ✔
A small reminder, if anyone cares about it:
5 BTC Escrow is still a lot more than other new campaigns have provided. Shouldn't be a problem, good gesture from their side.
XBTec offered higher rates and escrowed less (even if you multiply the escrowed amount by 4, because they only accepted 25 participants), so it should be all good.

For people that don't know how much they escrowed:
==========Message to sign==========
I, BitcoinInformation, am currently in control of 1.0625BTC, which have been send to me so that I can keep them in escrow for this campaign. The coins that have been escrowed are enough to pay 25 Full Member if they posted 50 messages. The calculation for this is ((50*25)*0.00085).

If XBTec fails to pay up these funds will be used reimburse the participants as far as possible. These funds will be fairly distributed among the participants.
If XBTec pays up, these funds will be returned to him without any fee's. Donations are welcome though.

This messaged will be signed by the address that contains these funds (13te3WeK1r6GxCyWuWYV).

If you have any questions, do ask.
==========Signed message==========
HLF9MPHlNXpPen0lFlo64GBqq705nEOlipD6cbV5UfOw7qsQA4Ygj2DF0gRaWF974LMuLx/5F+DZUlgPBbwcG6w=
============Signed with===========
13te3WeK1r6GxCyWuWYVDZaADfUYySAutC
member
Activity: 84
Merit: 10
SomeoneInNeed
Posts: 81
BTC: *will provide later

Sorry but you can not join:
If you are scammer/with negative trust you cannot enroll.


You need to fix your sig Holdaaja ! You using the wrong size Smiley
sr. member
Activity: 318
Merit: 250
Can I change my addy later?
I don't use same address for long so...
sed
hero member
Activity: 532
Merit: 500
SomeoneInNeed
Posts: 81
BTC: *will provide later

I don't think they're going to accept you until you resolve this: https://bitcointalksearch.org/topic/scam-report-someoneinneed-448343
legendary
Activity: 1778
Merit: 1043
#Free market
SomeoneInNeed
Posts: 81
BTC: *will provide later

Quote
  • If you are scammer/with negative trust you cannot enroll.


PS: sorry for the multiple post !
legendary
Activity: 1274
Merit: 1000
SomeoneInNeed
Posts: 81
BTC: *will provide later

Sorry but you can not join:
If you are scammer/with negative trust you cannot enroll.
member
Activity: 94
Merit: 10
SomeoneInNeed
Posts: 81
BTC: *will provide later
legendary
Activity: 1778
Merit: 1043
#Free market
==========Message to sign==========
Hello everyone,

I am currently holding 5BTC in escrow for this campaign. These coins will be used to reimburse people if the OP disappears or defaults. Otherwise they will be send back as soon as everybody got paid.

Just to clarify, the extra 0.05BTC is a tip that the OP send me.

Kind Regards,
BitcoinInformation
==========Address used to sign==========
1ExgQhoWP9aEJrSYgHKRt9EF8Hwa8aFprF
==========Signed message==========
G8HrvHd8E5B3+80oGGIywHTQCr+1MpEMUAzrMPjGK1ALYfwZMIvy4Q6f2BTLzMc6ViD3XaU14UxAFKaSsO9hcEQ=

Hey bitcoininformation,

I was trying to see if I could figure out how to verify your signed message.  I tried it in Multibit but I couldn't get it to verify.  I wonder if I did something wrong.  Am I supposed to use the "===" sections or not?

This is the correct message :

-----BEGIN BITCOIN SIGNED MESSAGE-----
Hello everyone,

I am currently holding 5BTC in escrow for this campaign. These coins will be used to reimburse people if the OP disappears or defaults. Otherwise they will be send back as soon as everybody got paid.

Just to clarify, the extra 0.05BTC is a tip that the OP send me.

Kind Regards,
BitcoinInformation
-----BEGIN SIGNATURE-----
1ExgQhoWP9aEJrSYgHKRt9EF8Hwa8aFprF
G8HrvHd8E5B3+80oGGIywHTQCr+1MpEMUAzrMPjGK1ALYfwZMIvy4Q6f2BTLzMc6ViD3XaU14UxAFKaSsO9hcEQ=
-----END BITCOIN SIGNED MESSAGE-----


Copy and paste  here : https://brainwallet.github.io/#verify

I got "Message failed to verify!" with both, multibit and brainwallet.org
What does this mean?

There should be no trailing spaces  and   initial , try with this pastebin : http://pastebin.com/N1ASkcyS   ( the RAW Paste Data ) .


I got it working now with this RAW Paste Data.
All good now Smiley

you're welcome;)

I do not have no problem to helping people; =
sed
hero member
Activity: 532
Merit: 500
Ok, I got it now too.  I had missed the bottom ---- delimiter when doing it this last time from the raw paste data.  Thanks you guys.  Now I'm going to play with it in multibit till i figure that out.

EDIT: got it working in multibit now too.  There must have been something funny in the forum formatting which was messing me up.  Cheers and thanks everyone for the education.
sed
hero member
Activity: 532
Merit: 500
==========Message to sign==========
Hello everyone,

I am currently holding 5BTC in escrow for this campaign. These coins will be used to reimburse people if the OP disappears or defaults. Otherwise they will be send back as soon as everybody got paid.

Just to clarify, the extra 0.05BTC is a tip that the OP send me.

Kind Regards,
BitcoinInformation
==========Address used to sign==========
1ExgQhoWP9aEJrSYgHKRt9EF8Hwa8aFprF
==========Signed message==========
G8HrvHd8E5B3+80oGGIywHTQCr+1MpEMUAzrMPjGK1ALYfwZMIvy4Q6f2BTLzMc6ViD3XaU14UxAFKaSsO9hcEQ=

Hey bitcoininformation,

I was trying to see if I could figure out how to verify your signed message.  I tried it in Multibit but I couldn't get it to verify.  I wonder if I did something wrong.  Am I supposed to use the "===" sections or not?

This is the correct message :

-----BEGIN BITCOIN SIGNED MESSAGE-----
Hello everyone,

I am currently holding 5BTC in escrow for this campaign. These coins will be used to reimburse people if the OP disappears or defaults. Otherwise they will be send back as soon as everybody got paid.

Just to clarify, the extra 0.05BTC is a tip that the OP send me.

Kind Regards,
BitcoinInformation
-----BEGIN SIGNATURE-----
1ExgQhoWP9aEJrSYgHKRt9EF8Hwa8aFprF
G8HrvHd8E5B3+80oGGIywHTQCr+1MpEMUAzrMPjGK1ALYfwZMIvy4Q6f2BTLzMc6ViD3XaU14UxAFKaSsO9hcEQ=
-----END BITCOIN SIGNED MESSAGE-----


Copy and paste  here : https://brainwallet.github.io/#verify

I got "Message failed to verify!" with both, multibit and brainwallet.org
What does this mean?

There should be no trailing spaces  and   initial , try with this pastebin : http://pastebin.com/N1ASkcyS   ( the RAW Paste Data ) .


It looks like the raw pastebin data does have a trailing space after the first two sentences: "got paid. " and "send me. "  I put these into the brainwallet interface and still no verify.  I wonder what I could be doing wrong.
legendary
Activity: 1274
Merit: 1000
==========Message to sign==========
Hello everyone,

I am currently holding 5BTC in escrow for this campaign. These coins will be used to reimburse people if the OP disappears or defaults. Otherwise they will be send back as soon as everybody got paid.

Just to clarify, the extra 0.05BTC is a tip that the OP send me.

Kind Regards,
BitcoinInformation
==========Address used to sign==========
1ExgQhoWP9aEJrSYgHKRt9EF8Hwa8aFprF
==========Signed message==========
G8HrvHd8E5B3+80oGGIywHTQCr+1MpEMUAzrMPjGK1ALYfwZMIvy4Q6f2BTLzMc6ViD3XaU14UxAFKaSsO9hcEQ=

Hey bitcoininformation,

I was trying to see if I could figure out how to verify your signed message.  I tried it in Multibit but I couldn't get it to verify.  I wonder if I did something wrong.  Am I supposed to use the "===" sections or not?

This is the correct message :

-----BEGIN BITCOIN SIGNED MESSAGE-----
Hello everyone,

I am currently holding 5BTC in escrow for this campaign. These coins will be used to reimburse people if the OP disappears or defaults. Otherwise they will be send back as soon as everybody got paid.

Just to clarify, the extra 0.05BTC is a tip that the OP send me.

Kind Regards,
BitcoinInformation
-----BEGIN SIGNATURE-----
1ExgQhoWP9aEJrSYgHKRt9EF8Hwa8aFprF
G8HrvHd8E5B3+80oGGIywHTQCr+1MpEMUAzrMPjGK1ALYfwZMIvy4Q6f2BTLzMc6ViD3XaU14UxAFKaSsO9hcEQ=
-----END BITCOIN SIGNED MESSAGE-----


Copy and paste  here : https://brainwallet.github.io/#verify

I got "Message failed to verify!" with both, multibit and brainwallet.org
What does this mean?

There should be no trailing spaces  and   initial , try with this pastebin : http://pastebin.com/N1ASkcyS   ( the RAW Paste Data ) .


I got it working now with this RAW Paste Data.
All good now Smiley
sed
hero member
Activity: 532
Merit: 500
==========Message to sign==========
Hello everyone,

I am currently holding 5BTC in escrow for this campaign. These coins will be used to reimburse people if the OP disappears or defaults. Otherwise they will be send back as soon as everybody got paid.

Just to clarify, the extra 0.05BTC is a tip that the OP send me.

Kind Regards,
BitcoinInformation
==========Address used to sign==========
1ExgQhoWP9aEJrSYgHKRt9EF8Hwa8aFprF
==========Signed message==========
G8HrvHd8E5B3+80oGGIywHTQCr+1MpEMUAzrMPjGK1ALYfwZMIvy4Q6f2BTLzMc6ViD3XaU14UxAFKaSsO9hcEQ=

Hey bitcoininformation,

I was trying to see if I could figure out how to verify your signed message.  I tried it in Multibit but I couldn't get it to verify.  I wonder if I did something wrong.  Am I supposed to use the "===" sections or not?

This is the correct message :

-----BEGIN BITCOIN SIGNED MESSAGE-----
Hello everyone,

I am currently holding 5BTC in escrow for this campaign. These coins will be used to reimburse people if the OP disappears or defaults. Otherwise they will be send back as soon as everybody got paid.

Just to clarify, the extra 0.05BTC is a tip that the OP send me.

Kind Regards,
BitcoinInformation
-----BEGIN SIGNATURE-----
1ExgQhoWP9aEJrSYgHKRt9EF8Hwa8aFprF
G8HrvHd8E5B3+80oGGIywHTQCr+1MpEMUAzrMPjGK1ALYfwZMIvy4Q6f2BTLzMc6ViD3XaU14UxAFKaSsO9hcEQ=
-----END BITCOIN SIGNED MESSAGE-----


Copy and paste  here : https://brainwallet.github.io/#verify

I got "Message failed to verify!" with both, multibit and brainwallet.org
What does this mean?
(I have never done this though so it might be my fail.)

I also just tried in the brainwallet interface.  I also failed.  I think this puts me solidly into the class of people who don't know how to do this.  That or there's something funny going on with the whitespace characters.  I'm on GNU/Linux so I assume my system is going to use \n newlines (maybe this matters, idk).
legendary
Activity: 1778
Merit: 1043
#Free market
==========Message to sign==========
Hello everyone,

I am currently holding 5BTC in escrow for this campaign. These coins will be used to reimburse people if the OP disappears or defaults. Otherwise they will be send back as soon as everybody got paid.

Just to clarify, the extra 0.05BTC is a tip that the OP send me.

Kind Regards,
BitcoinInformation
==========Address used to sign==========
1ExgQhoWP9aEJrSYgHKRt9EF8Hwa8aFprF
==========Signed message==========
G8HrvHd8E5B3+80oGGIywHTQCr+1MpEMUAzrMPjGK1ALYfwZMIvy4Q6f2BTLzMc6ViD3XaU14UxAFKaSsO9hcEQ=

Hey bitcoininformation,

I was trying to see if I could figure out how to verify your signed message.  I tried it in Multibit but I couldn't get it to verify.  I wonder if I did something wrong.  Am I supposed to use the "===" sections or not?

This is the correct message :

-----BEGIN BITCOIN SIGNED MESSAGE-----
Hello everyone,

I am currently holding 5BTC in escrow for this campaign. These coins will be used to reimburse people if the OP disappears or defaults. Otherwise they will be send back as soon as everybody got paid.

Just to clarify, the extra 0.05BTC is a tip that the OP send me.

Kind Regards,
BitcoinInformation
-----BEGIN SIGNATURE-----
1ExgQhoWP9aEJrSYgHKRt9EF8Hwa8aFprF
G8HrvHd8E5B3+80oGGIywHTQCr+1MpEMUAzrMPjGK1ALYfwZMIvy4Q6f2BTLzMc6ViD3XaU14UxAFKaSsO9hcEQ=
-----END BITCOIN SIGNED MESSAGE-----


Copy and paste  here : https://brainwallet.github.io/#verify

I got "Message failed to verify!" with both, multibit and brainwallet.org
What does this mean?

There should be no trailing spaces  and   initial , try with this pastebin : http://pastebin.com/N1ASkcyS   ( the RAW Paste Data ) .
sed
hero member
Activity: 532
Merit: 500
==========Message to sign==========
Hello everyone,

I am currently holding 5BTC in escrow for this campaign. These coins will be used to reimburse people if the OP disappears or defaults. Otherwise they will be send back as soon as everybody got paid.

Just to clarify, the extra 0.05BTC is a tip that the OP send me.

Kind Regards,
BitcoinInformation
==========Address used to sign==========
1ExgQhoWP9aEJrSYgHKRt9EF8Hwa8aFprF
==========Signed message==========
G8HrvHd8E5B3+80oGGIywHTQCr+1MpEMUAzrMPjGK1ALYfwZMIvy4Q6f2BTLzMc6ViD3XaU14UxAFKaSsO9hcEQ=

Hey bitcoininformation,

I was trying to see if I could figure out how to verify your signed message.  I tried it in Multibit but I couldn't get it to verify.  I wonder if I did something wrong.  Am I supposed to use the "===" sections or not?

This is the correct message :

-----BEGIN BITCOIN SIGNED MESSAGE-----
Hello everyone,

I am currently holding 5BTC in escrow for this campaign. These coins will be used to reimburse people if the OP disappears or defaults. Otherwise they will be send back as soon as everybody got paid.

Just to clarify, the extra 0.05BTC is a tip that the OP send me.

Kind Regards,
BitcoinInformation
-----BEGIN SIGNATURE-----
1ExgQhoWP9aEJrSYgHKRt9EF8Hwa8aFprF
G8HrvHd8E5B3+80oGGIywHTQCr+1MpEMUAzrMPjGK1ALYfwZMIvy4Q6f2BTLzMc6ViD3XaU14UxAFKaSsO9hcEQ=
-----END BITCOIN SIGNED MESSAGE-----


Copy and paste  here : https://brainwallet.github.io/#verify

I appreciate the suggestion.  The main differences I can see are that you used --- rather than === to delimit sections and that you include the address and signature in the same section at the bottom rather than in two sections.  I also appreciate the suggestion to try a different interface.  However, I'm using MultiBit client to verify so I have three fields to fill out.  The first is "address", the second is "message", the third is "signature". I think that addres and signature are unambiguous.  you copy-paste the string into those fields with no surrounding whitespace or delimeters.  The message, however, is a little ambiguous.  Do I include the delimters?  Now I'm thinking "no" since you changed them.
copper member
Activity: 3948
Merit: 2201
Verified awesomeness ✔
If we make escrow amount bigger could we use another escrow for that?
If tere is 2 escrows with 5btc each it won't be as big temptation to stole it as compared to 1 escrow with 10btc.
My suggest for possible second escrow is escrow.ms
That sounds like a good idea IMO.

Yeah i get it man, but always in almost all scams nobody "could see it coming" , so i think its fair for op to choose another escrow if the amount gets bigger like the user above me said, or simple pay bi-weekly or weekly the first month so he dont need to scrow so many btcs.
I get that and I think that it's a great idea to split the risk.

This is the correct message :
-snip-
Thanks! I always post it in my own format, but it seems like a bad idea. Will be using the brainwallet format from now on.

I got "Message failed to verify!" with both, multibit and brainwallet.org
What does this mean?
I just tried it myself and it works just fine for me. You must have copied it incorrectly.
legendary
Activity: 1274
Merit: 1000
==========Message to sign==========
Hello everyone,

I am currently holding 5BTC in escrow for this campaign. These coins will be used to reimburse people if the OP disappears or defaults. Otherwise they will be send back as soon as everybody got paid.

Just to clarify, the extra 0.05BTC is a tip that the OP send me.

Kind Regards,
BitcoinInformation
==========Address used to sign==========
1ExgQhoWP9aEJrSYgHKRt9EF8Hwa8aFprF
==========Signed message==========
G8HrvHd8E5B3+80oGGIywHTQCr+1MpEMUAzrMPjGK1ALYfwZMIvy4Q6f2BTLzMc6ViD3XaU14UxAFKaSsO9hcEQ=

Hey bitcoininformation,

I was trying to see if I could figure out how to verify your signed message.  I tried it in Multibit but I couldn't get it to verify.  I wonder if I did something wrong.  Am I supposed to use the "===" sections or not?

This is the correct message :

-----BEGIN BITCOIN SIGNED MESSAGE-----
Hello everyone,

I am currently holding 5BTC in escrow for this campaign. These coins will be used to reimburse people if the OP disappears or defaults. Otherwise they will be send back as soon as everybody got paid.

Just to clarify, the extra 0.05BTC is a tip that the OP send me.

Kind Regards,
BitcoinInformation
-----BEGIN SIGNATURE-----
1ExgQhoWP9aEJrSYgHKRt9EF8Hwa8aFprF
G8HrvHd8E5B3+80oGGIywHTQCr+1MpEMUAzrMPjGK1ALYfwZMIvy4Q6f2BTLzMc6ViD3XaU14UxAFKaSsO9hcEQ=
-----END BITCOIN SIGNED MESSAGE-----


Copy and paste  here : https://brainwallet.github.io/#verify

I got "Message failed to verify!" with both, multibit and brainwallet.org
What does this mean?
(I have never done this though so it might be my fail.)
legendary
Activity: 1778
Merit: 1043
#Free market
==========Message to sign==========
Hello everyone,

I am currently holding 5BTC in escrow for this campaign. These coins will be used to reimburse people if the OP disappears or defaults. Otherwise they will be send back as soon as everybody got paid.

Just to clarify, the extra 0.05BTC is a tip that the OP send me.

Kind Regards,
BitcoinInformation
==========Address used to sign==========
1ExgQhoWP9aEJrSYgHKRt9EF8Hwa8aFprF
==========Signed message==========
G8HrvHd8E5B3+80oGGIywHTQCr+1MpEMUAzrMPjGK1ALYfwZMIvy4Q6f2BTLzMc6ViD3XaU14UxAFKaSsO9hcEQ=

Hey bitcoininformation,

I was trying to see if I could figure out how to verify your signed message.  I tried it in Multibit but I couldn't get it to verify.  I wonder if I did something wrong.  Am I supposed to use the "===" sections or not?

This is the correct message :

-----BEGIN BITCOIN SIGNED MESSAGE-----
Hello everyone,

I am currently holding 5BTC in escrow for this campaign. These coins will be used to reimburse people if the OP disappears or defaults. Otherwise they will be send back as soon as everybody got paid.

Just to clarify, the extra 0.05BTC is a tip that the OP send me.

Kind Regards,
BitcoinInformation
-----BEGIN SIGNATURE-----
1ExgQhoWP9aEJrSYgHKRt9EF8Hwa8aFprF
G8HrvHd8E5B3+80oGGIywHTQCr+1MpEMUAzrMPjGK1ALYfwZMIvy4Q6f2BTLzMc6ViD3XaU14UxAFKaSsO9hcEQ=
-----END BITCOIN SIGNED MESSAGE-----


Copy and paste  here : https://brainwallet.github.io/#verify
sr. member
Activity: 896
Merit: 272
Undeadbitcoiner Will not DIE until 1BTC=50K
Stayed long time in Bitcointalk, Supported PD now the time to support New and Upgoing.
Whatever outcome will be but will be supporting with good luck.

Updated signature.

Username : undeadbitcoiner
Posts : 725
BTC : 1HWQat1RpsPNDrzaNcHHmNgQMxXjPcGoYd
sed
hero member
Activity: 532
Merit: 500
==========Message to sign==========
Hello everyone,

I am currently holding 5BTC in escrow for this campaign. These coins will be used to reimburse people if the OP disappears or defaults. Otherwise they will be send back as soon as everybody got paid.

Just to clarify, the extra 0.05BTC is a tip that the OP send me.

Kind Regards,
BitcoinInformation
==========Address used to sign==========
1ExgQhoWP9aEJrSYgHKRt9EF8Hwa8aFprF
==========Signed message==========
G8HrvHd8E5B3+80oGGIywHTQCr+1MpEMUAzrMPjGK1ALYfwZMIvy4Q6f2BTLzMc6ViD3XaU14UxAFKaSsO9hcEQ=

Hey bitcoininformation,

I was trying to see if I could figure out how to verify your signed message.  I tried it in Multibit but I couldn't get it to verify.  I wonder if I did something wrong.  Am I supposed to use the "===" sections or not?
Pages:
Jump to: