[DIG] DIGIT [X13] |Available For Takeover! | - page 38.

AceCobra1

sr. member

Activity: 364

Merit: 250

Quote from: stokecrypto on June 01, 2014, 03:49:21 PM

the port is what ever you want it to be,

so if you want your wallet server on port 1000, you would use port 1000 in your miners .bat.

if you did yourip:1000, you could connect from a remote computer and mine into your local wallet

thanks

stokecrypto

full member

Activity: 154

Merit: 100

the port is what ever you want it to be,

so if you want your wallet server on port 1000, you would use port 1000 in your miners .bat.

if you did yourip:1000, you could connect from a remote computer and mine into your local wallet

AceCobra1

sr. member

Activity: 364

Merit: 250

Quote from: Kergekoin on June 01, 2014, 03:47:25 PM

Quote from: AceCobra1 on June 01, 2014, 03:44:19 PM

Quote from: qwizzie on June 01, 2014, 03:13:41 PM

Quote from: stokecrypto on June 01, 2014, 03:02:05 PM

solo mine is easy just add the following to digit.conf

rpcuser=gpu1
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44101
daemon=1
server=1
listen=1

then in your .bat or .conf file for your miner use http://127.0.0.1:44101 as your server address (address usually for the pool) and you can mine

rpcport=44101 ? not rpcport 11101 as from post 1 ?

How do I find out which port I should use ?

You can use any port what you like. It does not matter. This port needs to be free ofc.
Default ports are in OP. If you want you can use default ports too. No problem.

The password, username and rpcport has to match your miner password, username and rpcport. Thats the only thing to check.

So does the port in the bat file in CGminer need to match the port in the conf file ?

Hoshimaru

sr. member

Activity: 411

Merit: 252

Quote from: AceCobra1 on June 01, 2014, 03:44:19 PM

Quote from: qwizzie on June 01, 2014, 03:13:41 PM

Quote from: stokecrypto on June 01, 2014, 03:02:05 PM

solo mine is easy just add the following to digit.conf

rpcuser=gpu1
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44101
daemon=1
server=1
listen=1

then in your .bat or .conf file for your miner use http://127.0.0.1:44101 as your server address (address usually for the pool) and you can mine

rpcport=44101 ? not rpcport 11101 as from post 1 ?

How do I find out which port I should use ?
It doesn't matter. I you like, you can even use 666 or 9999, as long as no other process or service uses them.
I solo mine all the time on 1981. Same config for all wallets and no need to alter bat files or cgwatcher profile Wink

pieran

newbie

Activity: 34

Merit: 0

is it possible to solo mine with multiple rigs by setting up the wallet on one rig and connecting all miners to it? Or do I need to setup some kind of proxy?

Kergekoin

hero member

Activity: 546

Merit: 500

Quote from: AceCobra1 on June 01, 2014, 03:44:19 PM

Quote from: qwizzie on June 01, 2014, 03:13:41 PM

Quote from: stokecrypto on June 01, 2014, 03:02:05 PM

solo mine is easy just add the following to digit.conf

rpcuser=gpu1
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44101
daemon=1
server=1
listen=1

then in your .bat or .conf file for your miner use http://127.0.0.1:44101 as your server address (address usually for the pool) and you can mine

rpcport=44101 ? not rpcport 11101 as from post 1 ?

How do I find out which port I should use ?

You can use any port what you like. It does not matter. This port needs to be free ofc.
Default ports are in OP. If you want you can use default ports too. No problem.

The password, username and rpcport has to match your miner password, username and rpcport. Thats the only thing to check.

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: AceCobra1 on June 01, 2014, 03:44:19 PM

Quote from: qwizzie on June 01, 2014, 03:13:41 PM

Quote from: stokecrypto on June 01, 2014, 03:02:05 PM

solo mine is easy just add the following to digit.conf

rpcuser=gpu1
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44101
daemon=1
server=1
listen=1

then in your .bat or .conf file for your miner use http://127.0.0.1:44101 as your server address (address usually for the pool) and you can mine

rpcport=44101 ? not rpcport 11101 as from post 1 ?

How do I find out which port I should use ?

just put something like 3666 and match it with the bat(conf/shortcut of your miner

AceCobra1

sr. member

Activity: 364

Merit: 250

Quote from: qwizzie on June 01, 2014, 03:13:41 PM

Quote from: stokecrypto on June 01, 2014, 03:02:05 PM

solo mine is easy just add the following to digit.conf

rpcuser=gpu1
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44101
daemon=1
server=1
listen=1

then in your .bat or .conf file for your miner use http://127.0.0.1:44101 as your server address (address usually for the pool) and you can mine

rpcport=44101 ? not rpcport 11101 as from post 1 ?

How do I find out which port I should use ?

Kergekoin

hero member

Activity: 546

Merit: 500

Lol, guys read the DSF posts. They distanced themselves from pools because they want to be fair for everyone and give same conditions for everyone.

Use the X13 sph sgminer here:

https://bitcointalk.org/index.php?topic=623409.0;topicseen

Im sure it works. I used it on marucoin and worked fine.

qwizzie

legendary

Activity: 2548

Merit: 1245

Quote from: Hoshimaru on June 01, 2014, 03:37:56 PM

Quote from: stokecrypto on June 01, 2014, 03:33:10 PM

good old solo mine. brings back memories

That suits me well

I've been looking forward to a launch were I could at least solo mine for 15 - 30 minutes before diff skyrockets because of pools coming online.
Lately, I didn't even bother to try solo.

i even did solo mining without windows wallet once (with some difficulty) .. those good old maxcoin times

good thing we have a windows wallet right after start..

qwizzie

legendary

Activity: 2548

Merit: 1245

Quote from: ChekaZ on June 01, 2014, 03:36:33 PM

Which miner to use for X13? Same as for X11?

see post 14

qwizzie

legendary

Activity: 2548

Merit: 1245

Quote from: Hoshimaru on June 01, 2014, 03:31:57 PM

Any idea if minep.it will have a pool ready for Digit X13?
If not, what pools are joining in?

at least two pools have offically declared on this forum to support Digit, those pools will need to setup the pool for Digit
first .. which they can only do after launch time. When they are ready they will announce it here ..

flubber

full member

Activity: 238

Merit: 100

Quote from: kahir on June 01, 2014, 03:36:28 PM

looks like Dev want to solomine for while then give us wallets and nodes

Yeah dev, why wallet release SHORTLY after launch, the launch should be the wallet !! ??

Hoshimaru

sr. member

Activity: 411

Merit: 252

Quote from: stokecrypto on June 01, 2014, 03:33:10 PM

good old solo mine. brings back memories

That suits me well

I've been looking forward to a launch were I could at least solo mine for 15 - 30 minutes before diff skyrockets because of pools coming online.
Lately, I didn't even bother to try solo.

ChekaZ

legendary

Activity: 1884

Merit: 1005

Which miner to use for X13? Same as for X11?

kahir

legendary

Activity: 1050

Merit: 1000

looks like Dev want to solomine for while then give us wallets and nodes

marada

sr. member

Activity: 442

Merit: 250

Do we have to wait with sources checking until the coin is launched??

stokecrypto

full member

Activity: 154

Merit: 100

good old solo mine. brings back memories

Hoshimaru

sr. member

Activity: 411

Merit: 252

Any idea if minep.it will have a pool ready for Digit X13?
If not, what pools are joining in?

qwizzie

legendary

Activity: 2548

Merit: 1245

wait till launch time !!

Topic: [DIG] DIGIT [X13] |Available For Takeover! | - page 38. (Read 78113 times)