any one know how long before Bittrex and Yobit get wallets sorted. any news on new exchanges yet?
cheers have fun
Topic: 💸 DigiCube 🔷 NOW ON RAWX (NEW MCXNOW) 💸 EARN 50K CUBE/WEEK WITH TWITTER! - page 197. (Read 460460 times)
March 20, 2016, 03:18:28 AM
March 20, 2016, 02:37:24 AM
Remove that line from the conf file. You are doing the exact opposite of what you want it to do and right now it's locked for everything except staking
Ow... Thanx, i'll replace the conf with the previous one
March 20, 2016, 02:32:31 AM
Remove that line from the conf file. You are doing the exact opposite of what you want it to do and right now it's locked for everything except staking
March 20, 2016, 02:30:23 AM
You can also use
reservebalance=99999999
in DigiCube.conf to run a node without staking or encrypting, as well (the network and I appreciate you running a node
)
This can be turned on and off in the debug window, too
reservebalance true
reservebalance false
Replace with how much you want always available for sending
reservebalance=99999999
in DigiCube.conf to run a node without staking or encrypting, as well (the network and I appreciate you running a node
)This can be turned on and off in the debug window, too
reservebalance true
reservebalance false
Replace
Thanx Spots and Bones261 for the info... Much appreciated
Spots suggestion trumps mine. That's why I deleted my comment.
I see... I used the 'reservebalance=99999999' in DigiCube.conf as suggested by Spots and opened the wallet having this unlocked icon and message 'Wallet is encrypted and currently unlocked for block minting only'... Am I in the right configuration? I just want for the wallet to have its true stake reward percentage
You have the complete opposite happening
Remove the walletpassphrase line I'm assuming you have in there
Apologies... How to remove the walletpassphrase in the wallet?
March 20, 2016, 02:27:43 AM
You can also use
reservebalance=99999999
in DigiCube.conf to run a node without staking or encrypting, as well (the network and I appreciate you running a node)
This can be turned on and off in the debug window, too
reservebalance true
reservebalance false
Replace with how much you want always available for sending
reservebalance=99999999
in DigiCube.conf to run a node without staking or encrypting, as well (the network and I appreciate you running a node
)This can be turned on and off in the debug window, too
reservebalance true
reservebalance false
Replace
Thanx Spots and Bones261 for the info... Much appreciated
Spots suggestion trumps mine. That's why I deleted my comment.
I see... I used the 'reservebalance=99999999' in DigiCube.conf as suggested by Spots and opened the wallet having this unlocked icon and message 'Wallet is encrypted and currently unlocked for block minting only'... Am I in the right configuration? I just want for the wallet to have its true stake reward percentage
You have the complete opposite happening
Remove the walletpassphrase line I'm assuming you have in there
March 20, 2016, 02:22:19 AM
You can also use
reservebalance=99999999
in DigiCube.conf to run a node without staking or encrypting, as well (the network and I appreciate you running a node)
This can be turned on and off in the debug window, too
reservebalance true
reservebalance false
Replace with how much you want always available for sending
reservebalance=99999999
in DigiCube.conf to run a node without staking or encrypting, as well (the network and I appreciate you running a node
)This can be turned on and off in the debug window, too
reservebalance true
reservebalance false
Replace
Thanx Spots and Bones261 for the info... Much appreciated
Spots suggestion trumps mine. That's why I deleted my comment.
I see... I used the 'reservebalance=99999999' in DigiCube.conf as suggested by Spots and opened the wallet having this unlocked icon and message 'Wallet is encrypted and currently unlocked for block minting only'... I hope I did it right, I just want for the wallet to have its true stake reward percentage
March 20, 2016, 01:28:58 AM
You can also use
reservebalance=99999999
in DigiCube.conf to run a node without staking or encrypting, as well (the network and I appreciate you running a node)
This can be turned on and off in the debug window, too
reservebalance true
reservebalance false
Replace with how much you want always available for sending
reservebalance=99999999
in DigiCube.conf to run a node without staking or encrypting, as well (the network and I appreciate you running a node
)This can be turned on and off in the debug window, too
reservebalance true
reservebalance false
Replace
Thanx Spots and Bones261 for the info... Much appreciated
Spots suggestion trumps mine. That's why I deleted my comment.
March 20, 2016, 01:26:50 AM
You can also use
reservebalance=99999999
in DigiCube.conf to run a node without staking or encrypting, as well (the network and I appreciate you running a node)
This can be turned on and off in the debug window, too
reservebalance true
reservebalance false
Replace with how much you want always available for sending
reservebalance=99999999
in DigiCube.conf to run a node without staking or encrypting, as well (the network and I appreciate you running a node
)This can be turned on and off in the debug window, too
reservebalance true
reservebalance false
Replace
Thanx Spots and Bones261 for the info... Much appreciated
March 20, 2016, 01:18:10 AM
You can also use
reservebalance=99999999
in DigiCube.conf to run a node without staking or encrypting, as well (the network and I appreciate you running a node)
This can be turned on and off in the debug window, too
reservebalance true
reservebalance false
Replace with how much you want always available for sending
reservebalance=99999999
in DigiCube.conf to run a node without staking or encrypting, as well (the network and I appreciate you running a node
)This can be turned on and off in the debug window, too
reservebalance true
reservebalance false
Replace
March 20, 2016, 01:12:20 AM
I still confused about new mint reward system in wallet 1.6 ? if before 50k block I got reward in 5-6 day ~20 cube(from 100 coin) that now only 1cube ?
yep, spots made cube v1.6 a unique coin, tamagotchi-like,
one should constantly nanny the wallet to keep block weights above the 2% threshold,
and small blocks are practically useless (almost)
soo my 7 k cubes is useless ? everyday i will get those 1 cube ? : D
hahahaha
Send all of your coins to yourself so they are all in one input.
Lock your wallet for two days.
Unlock your wallet after 2 days and wait for stake.
Repeat
If you have 7000 coins in one input, after 2 days the coin-days would be 14000, so more than enough to qualify for the 2000%/yr stake.
You may have to sacrifice some of those coindays if they are less than 2% of the current block number. You could also lock your wallet and wait for the day when all of your inputs have a coinday greater than 2% of the block reward. Not sure how big your inputs are though. If they are only 1 coin, that would take over 3 decades for that input to get enough weight.
You are better off saying fuck it and eating the loss one-time right now to combine them all at once. I see why you would want to hold on to all that coin age, but sometimes you gotta just say screw it. You should have combined them a few days before block 500k, but luckily it's still fairly early so competition for big blocks will still be pretty slim; not that big of a loss. Each minute you wait, however, is potential coin age that you won't accumulate, so I would do it as soon as possible
Send all coins to yourself in one transaction and lock the wallet for like 3 days just to be on the safe side. When you unlock it, you should stake almost immediately for 5.5% x the days it was locked. If you keep it locked for three days, you will stake approximately 1155 coins with an input size of 7000
Newbie here... Does lock the wallet means encrypting it or just don't open the wallet?.. I just combined the cubes in another wallet, sent it to wallet 1.6 and will open the wallet again in 2 1/2 days prior my trip for days... Thanx in advance for the response
March 19, 2016, 11:24:56 PM
What conf file will I put did? Where is that located?
maxconnections=99
addnode=46.105.158.205
addnode=98.144.161.18
addnode=109.60.4.135:55041
addnode=173.78.118.187:50588
addnode=83.251.51.13:4509
addnode=185.31.33.159:63686
addnode=106.51.116.240:8888
addnode=112.198.98.233:58451
addnode=109.75.136.179:64900
maxconnections=99
addnode=46.105.158.205
addnode=98.144.161.18
addnode=109.60.4.135:55041
addnode=173.78.118.187:50588
addnode=83.251.51.13:4509
addnode=185.31.33.159:63686
addnode=106.51.116.240:8888
addnode=112.198.98.233:58451
addnode=109.75.136.179:64900
In Windows, it will generally be in this folder:
C:\Users\yourusername\AppData\Roaming\DigiCube
If you do not have one, you will have to create DigiCube.conf
March 19, 2016, 10:06:22 PM
What conf file will I put did? Where is that located?
maxconnections=99
addnode=46.105.158.205
addnode=98.144.161.18
addnode=109.60.4.135:55041
addnode=173.78.118.187:50588
addnode=83.251.51.13:4509
addnode=185.31.33.159:63686
addnode=106.51.116.240:8888
addnode=112.198.98.233:58451
addnode=109.75.136.179:64900
maxconnections=99
addnode=46.105.158.205
addnode=98.144.161.18
addnode=109.60.4.135:55041
addnode=173.78.118.187:50588
addnode=83.251.51.13:4509
addnode=185.31.33.159:63686
addnode=106.51.116.240:8888
addnode=112.198.98.233:58451
addnode=109.75.136.179:64900
March 19, 2016, 08:48:30 PM
Haven't been reading every page but any update on android wallet?
He's working on a way to make the fork go smoothly since we had to do some network repairs to resolve all the errors from v1.6 - Those are now settled, so we can move forward again. Android is a bit more complicated since the blockchain files are a little harder to work with. I imagine he will have a solution soon, sorry for the delay
March 19, 2016, 03:15:45 PM
Haven't been reading every page but any update on android wallet?
March 19, 2016, 03:09:22 PM
Later today I will replace the 'DigiCube v1.2' countdown on http://freestaking.com to show the minimum age needed and max reward possible, updated every 5 seconds
Got a few other things to do first today, but I'll make sure I throw that in later
Got a few other things to do first today, but I'll make sure I throw that in later
March 19, 2016, 03:02:38 PM
right after 500K Block inflation has been halved after several complaints that CUBE will reach an incredible supply so if you didnt have 10K CUBE or more after block 500K the staking time has increased. 10K CUBE will stake in 24 hours 5000 CUBE will take 2 days and 1000 CUBE takes 11 days. The measures taken to curb inflation have now been introduced. Whens Bittrex going to let us deposit and withdraw ?
March 19, 2016, 12:41:11 PM
I still confused about new mint reward system in wallet 1.6 ? if before 50k block I got reward in 5-6 day ~20 cube(from 100 coin) that now only 1cube ?
yep, spots made cube v1.6 a unique coin, tamagotchi-like,
one should constantly nanny the wallet to keep block weights above the 2% threshold,
and small blocks are practically useless (almost)
soo my 7 k cubes is useless ? everyday i will get those 1 cube ? : D
hahahaha
Send all of your coins to yourself so they are all in one input.
Lock your wallet for two days.
Unlock your wallet after 2 days and wait for stake.
Repeat
If you have 7000 coins in one input, after 2 days the coin-days would be 14000, so more than enough to qualify for the 2000%/yr stake.
You may have to sacrifice some of those coindays if they are less than 2% of the current block number. You could also lock your wallet and wait for the day when all of your inputs have a coinday greater than 2% of the block reward. Not sure how big your inputs are though. If they are only 1 coin, that would take over 3 decades for that input to get enough weight.
You are better off saying fuck it and eating the loss one-time right now to combine them all at once. I see why you would want to hold on to all that coin age, but sometimes you gotta just say screw it. You should have combined them a few days before block 500k, but luckily it's still fairly early so competition for big blocks will still be pretty slim; not that big of a loss. Each minute you wait, however, is potential coin age that you won't accumulate, so I would do it as soon as possible
Send all coins to yourself in one transaction and lock the wallet for like 3 days just to be on the safe side. When you unlock it, you should stake almost immediately for 5.5% x the days it was locked. If you keep it locked for three days, you will stake approximately 1155 coins with an input size of 7000
during this 3 day locked wallet should be run ?
March 19, 2016, 10:04:48 AM
Megan (ShapeShift)
Mar 17, 20:54
Thanks for reaching out. I have added Digicube to our discovery list and our development team will look into it when they begin to decide on the next coins to add. We receive several dozen requests a day for new coins to be added so can not assure you we will add your coin, but we will for sure look into it and see if it makes sense for us to add at this time. Any new coins we add will be announced on our social media channels as well as via our email list.
people request for cube on https://shapeshift.zendesk.com/hc/en-us/requests/new
March 19, 2016, 08:25:22 AM
Hi guys I'm a newbie and I don't know how to make a wallet 
March 19, 2016, 04:34:31 AM
before block 500000 i had 7k CUBE
now there is only 260, wallet synced
WTF ?!!!
now there is only 260, wallet synced
WTF ?!!!
repairwallet
Needs to rescan for the fork
Jump to: