does the community has confidence is square., lol cube!?
Is this a trick question?
Topic: 💸 DigiCube 🔷 NOW ON RAWX (NEW MCXNOW) 💸 EARN 50K CUBE/WEEK WITH TWITTER! - page 321. (Read 460462 times)
December 04, 2015, 02:18:06 AM
Is this a trick question?
December 04, 2015, 02:15:43 AM
does the community has confidence is square., lol cube!?
December 04, 2015, 02:14:33 AM
Hey I am having a bitch of a time getting the windows wallet to work??? I've downloaded the bootstrap.dat and I've added the nodes from a couple pages in but I keep getting 0 connections with both the normal digicube windows wallet and the christmas one? Could someone please help me figure out why the freak I can't get this wallet to sync 
Thanks
EDIT - NEVERMIND it finally kicked in lol geez I was so confused for a couple mins there lol
ThanksEDIT - NEVERMIND it finally kicked in lol geez I was so confused for a couple mins there lol
How much CUBE are you starting off with dude? Good luck with CUBE, hope you get some good stakes
December 04, 2015, 02:07:04 AM
That error can be ignored too. It will still load and default to IPv4 . You may get less connections, but it should snag at least a couple
My wallet run properly, but no synchronizing, 0 connections... I add nodes to DigiCube.conf in .DigiCube folder, but did not help
addnode
December 04, 2015, 01:00:50 AM
Hey I am having a bitch of a time getting the windows wallet to work??? I've downloaded the bootstrap.dat and I've added the nodes from a couple pages in but I keep getting 0 connections with both the normal digicube windows wallet and the christmas one? Could someone please help me figure out why the freak I can't get this wallet to sync Thanks
EDIT - NEVERMIND it finally kicked in lol geez I was so confused for a couple mins there lol
ThanksEDIT - NEVERMIND it finally kicked in lol geez I was so confused for a couple mins there lol
addnode=108.61.189.19
addnode=104.238.176.25
addnode=85.25.44.20
addnode=64.57.133.225
addnode=82.211.30.147
addnode=45.32.68.23
addnode=54.187.131.248
addnode=98.196.176.13
addnode=94.52.19.22
addnode=149.202.2.191
addnode=46.164.246.81
addnode=46.118.235.88
addnode=98.213.214.11
addnode=98.213.214.114
addnode=97.97.227.235
addnode=71.8.87.15
addnode=205.237.142.9
addnode=180.191.100.168
addnode=137.135.51.19
addnode=178.33.209.212
addnode=79.44.190.120
addnode=70.92.184.20
addnode=113.148.158.23
addnode=89.222.233.22
addnode=76.25.23.251
addnode=84.90.100.9
addnode=71.179.61.20
addnode=50.71.66.17
addnode=93.81.56.16
addnode=73.30.72.11
addnode=138.210.145.50
addnode=111.254.59.191
addnode=79.77.65.21
addnode=88.153.243.17
addnode=188.120.84.111
addnode=213.22.1.147
addnode=104.172.24.7
addnode=104.246.99.226
addnode=88.114.7.8
addnode=37.35.9.55
addnode=216.211.93.16
addnode=85.76.35.6
addnode=219.77.44.18
addnode=104.238.169.7
http://www.presstab.pw/phpexplorer/CUBE/nodes.php
December 03, 2015, 11:26:11 PM
Hey I am having a bitch of a time getting the windows wallet to work??? I've downloaded the bootstrap.dat and I've added the nodes from a couple pages in but I keep getting 0 connections with both the normal digicube windows wallet and the christmas one? Could someone please help me figure out why the freak I can't get this wallet to sync Thanks
EDIT - NEVERMIND it finally kicked in lol geez I was so confused for a couple mins there lol
ThanksEDIT - NEVERMIND it finally kicked in lol geez I was so confused for a couple mins there lol
December 03, 2015, 10:50:32 PM
So you'd rather wait 30 days to get your 1% yearly (with a 90 day max) than wait for 24 hours to get 5% daily?
inflation makes me so very scared
December 03, 2015, 10:17:06 PM
You can pick pretty much any address on the presstab explorer and see every single staker had been doing well
December 03, 2015, 10:07:38 PM
So you'd rather wait 30 days to get your 1% yearly (with a 90 day max) than wait for 24 hours to get 5% daily?
inflation makes me so very scared
it's ok. cos in a month all the bagholders will be very rich
December 03, 2015, 09:57:50 PM
So you'd rather wait 30 days to get your 1% yearly (with a 90 day max) than wait for 24 hours to get 5% daily?
inflation makes me so very scared
Even a slow PoS coin can die very quickly. There are too many variables that contribute to a coin 'staying alive' - so judging CUBE based off a past experience won't make it true!
December 03, 2015, 09:15:04 PM
That error can be ignored too. It will still load and default to IPv4 . You may get less connections, but it should snag at least a couple
December 03, 2015, 09:00:51 PM
Oh no, next problem... 
Error: Couldn't open socket for incoming connections (socket returned error 97)
Error: Couldn't open socket for incoming connections (socket returned error 97)That error message is because you need to enable IPv6. You can execute "sudo modprobe ipv6" to enable it instantly. It won't stick through a reboot though, to enable it at startup execute "sudo nano /etc/modules" and add "ipv6", withou quotes, on a line by itself.
December 03, 2015, 08:36:35 PM
Oh no, next problem... Error: Couldn't open socket for incoming connections (socket returned error 97)
Error: Couldn't open socket for incoming connections (socket returned error 97) December 03, 2015, 08:12:23 PM
Are you going to leave that repo up for a long time? I will update the script to use yours if you are. Thanks for this, I must have built mine incorrectly and took for granted everyone had all the dev tools. My bad! Been meaning to test yours, too, and thank you in PM, but it totally slipped my mind, sorry about that.
By the way, I'm super happy to see both StakeBox and the Android developer (MystPhysX) are following closely. Thanks to everyone for helping out!
By the way, I'm super happy to see both StakeBox and the Android developer (MystPhysX) are following closely. Thanks to everyone for helping out!
December 03, 2015, 08:10:26 PM
Someone uses raspberry wallet?
I have a problem, after install i click on desktop to DigiCubeARM icon and choose "Executable", after that nothing happens. When i click Executable on terminal, terminal show up for a moment and disappears... Is the wallet requires additional packages? I use Raspbian Wheezy and Raspberry PI Rev B2
I have a problem, after install i click on desktop to DigiCubeARM icon and choose "Executable", after that nothing happens. When i click Executable on terminal, terminal show up for a moment and disappears... Is the wallet requires additional packages? I use Raspbian Wheezy and Raspberry PI Rev B2
Thanks for the report. Ok, open terminal in the folder with the Qt (/home/pi/DigiCubeARM) and type:
sudo chmod 755 DigiCubeARM
./DigiCubeARM
Then wait for it to load. This should all be done with the script though. After this, you will be able to double click to open and not require a terminal window to be open. If that doesn't work, we have another build that StakeBox uses: https://github.com/StakeBox/DigiCube - If this one works and mine doesn't, I will adjust the script to use this one instead
To automate the new wallet download, use this:
cd /home/pi
git clone https://github.com/StakeBox/DigiCube
cd DigiCube
sudo chmod 755 DigiCube
./DigiCube
Should work and make it executable so you can double click to open instead of doing so through terminal, although I have not personally tested StakeBox's yet. I use the one on my Github, but I also have my Pi set up with a ton of different stuff so my build might not be as global as I had hoped (totally possible). I'm using Raspian (Wheezy) on a B+
Thanks for fast reply! Actually i tried to run from the terminal and displays the missing package, i installed it and now another missing package...
Trying to install all of them and see what will happen next... This error are probably those who do not use any cryptocurrency wallet on raspberry.
It's working!
For future reference, run ldd against the digicube executable you will see the additional libraries that are needed to run it. The wallet atgithub.com/StakeBox/DigiCube is statically compiled and will work without additional libraries in both Rasbian wheezy and jessie.
December 03, 2015, 07:58:39 PM
Someone uses raspberry wallet?
I have a problem, after install i click on desktop to DigiCubeARM icon and choose "Executable", after that nothing happens. When i click Executable on terminal, terminal show up for a moment and disappears... Is the wallet requires additional packages? I use Raspbian Wheezy and Raspberry PI Rev B2
I have a problem, after install i click on desktop to DigiCubeARM icon and choose "Executable", after that nothing happens. When i click Executable on terminal, terminal show up for a moment and disappears... Is the wallet requires additional packages? I use Raspbian Wheezy and Raspberry PI Rev B2
Thanks for the report. Ok, open terminal in the folder with the Qt (/home/pi/DigiCubeARM) and type:
sudo chmod 755 DigiCubeARM
./DigiCubeARM
Then wait for it to load. This should all be done with the script though. After this, you will be able to double click to open and not require a terminal window to be open. If that doesn't work, we have another build that StakeBox uses: https://github.com/StakeBox/DigiCube - If this one works and mine doesn't, I will adjust the script to use this one instead
To automate the new wallet download, use this:
cd /home/pi
git clone https://github.com/StakeBox/DigiCube
cd DigiCube
sudo chmod 755 DigiCube
./DigiCube
Should work and make it executable so you can double click to open instead of doing so through terminal, although I have not personally tested StakeBox's yet. I use the one on my Github, but I also have my Pi set up with a ton of different stuff so my build might not be as global as I had hoped (totally possible). I'm using Raspian (Wheezy) on a B+
Thanks for fast reply! Actually i tried to run from the terminal and displays the missing package, i installed it and now another missing package...
Trying to install all of them and see what will happen next... This error are probably those who do not use any cryptocurrency wallet on raspberry.
It's working!
if someone also have a problem with wallet on raspberry, must install this standard bitcoin wallet packages:
sudo apt-get install libqt4-core libqt4-gui libqt4-dev
sudo apt-get install libboost-all-dev
sudo apt-get install libdb5.1++-dev
December 03, 2015, 07:57:04 PM
So you'd rather wait 30 days to get your 1% yearly (with a 90 day max) than wait for 24 hours to get 5% daily?
inflation makes me so very scared
December 03, 2015, 07:42:15 PM
Someone uses raspberry wallet?
I have a problem, after install i click on desktop to DigiCubeARM icon and choose "Executable", after that nothing happens. When i click Executable on terminal, terminal show up for a moment and disappears... Is the wallet requires additional packages? I use Raspbian Wheezy and Raspberry PI Rev B2
I have a problem, after install i click on desktop to DigiCubeARM icon and choose "Executable", after that nothing happens. When i click Executable on terminal, terminal show up for a moment and disappears... Is the wallet requires additional packages? I use Raspbian Wheezy and Raspberry PI Rev B2
Thanks for the report. Ok, open terminal in the folder with the Qt (/home/pi/DigiCubeARM) and type:
sudo chmod 755 DigiCubeARM
./DigiCubeARM
Then wait for it to load. This should all be done with the script though. After this, you will be able to double click to open and not require a terminal window to be open. If that doesn't work, we have another build that StakeBox uses: https://github.com/StakeBox/DigiCube - If this one works and mine doesn't, I will adjust the script to use this one instead
To automate the new wallet download, use this:
cd /home/pi
git clone https://github.com/StakeBox/DigiCube
cd DigiCube
sudo chmod 755 DigiCube
./DigiCube
Should work and make it executable so you can double click to open instead of doing so through terminal, although I have not personally tested StakeBox's yet. I use the one on my Github, but I also have my Pi set up with a ton of different stuff so my build might not be as global as I had hoped (totally possible). I'm using Raspian (Wheezy) on a B+
December 03, 2015, 07:35:42 PM
Someone uses raspberry wallet?
I have a problem, after install i click on desktop to DigiCubeARM icon and choose "Executable", after that nothing happens. When i click Executable on terminal, terminal show up for a moment and disappears... Is the wallet requires additional packages? I use Raspbian Wheezy and Raspberry PI Rev B2
I have a problem, after install i click on desktop to DigiCubeARM icon and choose "Executable", after that nothing happens. When i click Executable on terminal, terminal show up for a moment and disappears... Is the wallet requires additional packages? I use Raspbian Wheezy and Raspberry PI Rev B2
December 03, 2015, 06:47:49 PM
So you'd rather wait 30 days to get your 1% yearly (with a 90 day max) than wait for 24 hours to get 5% daily?
Jump to: