You must have the 190 mhz firmware on the first ones. Buy a xilinx jtag cable and write the 200 mhz firmware and all will run at 400 mhashes.
Will all new orders use the latest firmware?
EDIT: blackarrow - sent you a PM
Topic: Discontinued: Lancelot (Heavy Duty 400 Mega hashes, 2 x FPGA Mining Board) - page 26. (Read 86478 times)
May 17, 2013, 01:37:02 AM
Will all new orders use the latest firmware?
EDIT: blackarrow - sent you a PM
May 16, 2013, 11:14:52 PM
I received the remaining 5 Lancelots in my order today. They seem to run just a tad faster then the previous 5 I got... I'm not complaining 
They are all working great. New ones: 399 MH/s, old ones, 379 MH/s.
They are all working great. New ones: 399 MH/s, old ones, 379 MH/s.You must have the 190 mhz firmware on the first ones. Buy a xilinx jtag cable and write the 200 mhz firmware and all will run at 400 mhashes.
May 16, 2013, 08:56:57 PM
How is your group manufacturing plan going, blackarrow? I'm interested in 5 pcs.
May 16, 2013, 07:48:07 PM
At least an hour.
The speed is of course an estimate, the A over a day or 2 will tell you if it is accurate.
However, 3 HW with 12 A is pretty bad too (20%)
The speed is of course an estimate, the A over a day or 2 will tell you if it is accurate.
However, 3 HW with 12 A is pretty bad too (20%)
Apart from bogus speeds reported by cgminer (900Megahashes), it actually started yielding better results... It had quite a lot of dropped packets but more accepted packages than the other devices.
Code:
--------------------------------------------------------------------------------
[P]ool management [S]ettings [D]isplay options [Q]uit
ICA 0: | 529.1M/760.8Mh/s | A:58 R:0 HW: 4 U: 2.11/m
ICA 1: | 436.6M/425.9Mh/s | A:53 R:0 HW: 2 U: 1.93/m
ICA 2: | 391.7M/394.7Mh/s | A:50 R:0 HW: 0 U: 1.82/m
ICA 3: | 979.8M/1.001Gh/s | A:70 R:0 HW:14 U: 2.55/m
ICA 4: | 398.1M/411.5Mh/s | A:55 R:0 HW: 2 U: 2.00/m
--------------------------------------------------------------------------------
Guess which one is running v42 firmware ?[P]ool management [S]ettings [D]isplay options [Q]uit
ICA 0: | 529.1M/760.8Mh/s | A:58 R:0 HW: 4 U: 2.11/m
ICA 1: | 436.6M/425.9Mh/s | A:53 R:0 HW: 2 U: 1.93/m
ICA 2: | 391.7M/394.7Mh/s | A:50 R:0 HW: 0 U: 1.82/m
ICA 3: | 979.8M/1.001Gh/s | A:70 R:0 HW:14 U: 2.55/m
ICA 4: | 398.1M/411.5Mh/s | A:55 R:0 HW: 2 U: 2.00/m
--------------------------------------------------------------------------------
I'd think that might mean it might shorten it's life?
Is there a way to clock that firmware down a little to get that HW number a lot lower?
Also the incorrect MH/s could be directly related to the firmware - the standard Icarus firmware divides the work in 2 on 2 FPGAs and runs at a constant MHz
I'm of course assuming that's what the standard Lancelot firmware does also and it seems to match that by reporting the MH/s correctly.
Do you know what that firmware does (and also do you have details about how to upload it? I have a jTag cable also that I have never used ...)
May 16, 2013, 05:31:21 PM
At least an hour.
The speed is of course an estimate, the A over a day or 2 will tell you if it is accurate.
However, 3 HW with 12 A is pretty bad too (20%)
The speed is of course an estimate, the A over a day or 2 will tell you if it is accurate.
However, 3 HW with 12 A is pretty bad too (20%)
Apart from bogus speeds reported by cgminer (900Megahashes), it actually started yielding better results... It had quite a lot of dropped packets but more accepted packages than the other devices.
Code:
--------------------------------------------------------------------------------
[P]ool management [S]ettings [D]isplay options [Q]uit
ICA 0: | 529.1M/760.8Mh/s | A:58 R:0 HW: 4 U: 2.11/m
ICA 1: | 436.6M/425.9Mh/s | A:53 R:0 HW: 2 U: 1.93/m
ICA 2: | 391.7M/394.7Mh/s | A:50 R:0 HW: 0 U: 1.82/m
ICA 3: | 979.8M/1.001Gh/s | A:70 R:0 HW:14 U: 2.55/m
ICA 4: | 398.1M/411.5Mh/s | A:55 R:0 HW: 2 U: 2.00/m
--------------------------------------------------------------------------------
Guess which one is running v42 firmware ?[P]ool management [S]ettings [D]isplay options [Q]uit
ICA 0: | 529.1M/760.8Mh/s | A:58 R:0 HW: 4 U: 2.11/m
ICA 1: | 436.6M/425.9Mh/s | A:53 R:0 HW: 2 U: 1.93/m
ICA 2: | 391.7M/394.7Mh/s | A:50 R:0 HW: 0 U: 1.82/m
ICA 3: | 979.8M/1.001Gh/s | A:70 R:0 HW:14 U: 2.55/m
ICA 4: | 398.1M/411.5Mh/s | A:55 R:0 HW: 2 U: 2.00/m
--------------------------------------------------------------------------------
Looks like a Xilinx Jtag adapter is needed to upgrade the firmware a do some tests, any hints? Wich one are you using?
May 16, 2013, 04:46:12 PM
For new orders, any idea on current turnaround times?
May 16, 2013, 04:00:21 PM
I received the remaining 5 Lancelots in my order today. They seem to run just a tad faster then the previous 5 I got... I'm not complaining They are all working great. New ones: 399 MH/s, old ones, 379 MH/s.
Here are some pictures.
They are all working great. New ones: 399 MH/s, old ones, 379 MH/s.Here are some pictures.
May 16, 2013, 02:37:03 PM
Don't worry, customs just picked yours up for xray.
May 16, 2013, 02:33:37 PM
OK, thanks. I guess there is something wrong with my tracking number. Hopefully it's on it's way.
May 16, 2013, 02:32:36 PM
I'm not risking them going bad and delivery mains voltage to my miners.
I disagree. I have 9 pcs running here and no problems (apart from melting the plastic if they're too close to each other)
Those brick power supplies are #$%@
I disagree. I have 9 pcs running here and no problems (apart from melting the plastic if they're too close to each other)
May 16, 2013, 02:32:07 PM
5 Departed Facility in HONG KONG - HONG KONG HONG KONG - HONG KONG 15:07
May 16, 2013, 02:30:39 PM
Yeah mine says it left hk. But i have 6 boxes I think !
May 16, 2013, 02:13:58 PM
At least an hour.
The speed is of course an estimate, the A over a day or 2 will tell you if it is accurate.
However, 3 HW with 12 A is pretty bad too (20%)
The speed is of course an estimate, the A over a day or 2 will tell you if it is accurate.
However, 3 HW with 12 A is pretty bad too (20%)
Apart from bogus speeds reported by cgminer (900Megahashes), it actually started yielding better results... It had quite a lot of dropped packets but more accepted packages than the other devices.
Code:
--------------------------------------------------------------------------------
[P]ool management [S]ettings [D]isplay options [Q]uit
ICA 0: | 529.1M/760.8Mh/s | A:58 R:0 HW: 4 U: 2.11/m
ICA 1: | 436.6M/425.9Mh/s | A:53 R:0 HW: 2 U: 1.93/m
ICA 2: | 391.7M/394.7Mh/s | A:50 R:0 HW: 0 U: 1.82/m
ICA 3: | 979.8M/1.001Gh/s | A:70 R:0 HW:14 U: 2.55/m
ICA 4: | 398.1M/411.5Mh/s | A:55 R:0 HW: 2 U: 2.00/m
--------------------------------------------------------------------------------
Guess which one is running v42 firmware ?[P]ool management [S]ettings [D]isplay options [Q]uit
ICA 0: | 529.1M/760.8Mh/s | A:58 R:0 HW: 4 U: 2.11/m
ICA 1: | 436.6M/425.9Mh/s | A:53 R:0 HW: 2 U: 1.93/m
ICA 2: | 391.7M/394.7Mh/s | A:50 R:0 HW: 0 U: 1.82/m
ICA 3: | 979.8M/1.001Gh/s | A:70 R:0 HW:14 U: 2.55/m
ICA 4: | 398.1M/411.5Mh/s | A:55 R:0 HW: 2 U: 2.00/m
--------------------------------------------------------------------------------
May 16, 2013, 02:10:53 PM
Those brick power supplies are #$%@
I disagree. I have 9 pcs running here and no problems (apart from melting the plastic if they're too close to each other)
May 16, 2013, 01:52:15 PM
Yours is probably in the air. Mine hasn't even been scanned.
yes, otherwise, DHL is working during weekend but delivery is possible (here) only during working days, so I will have to wait until Monday. If you have got already tracking #, I'm pretty sure, that you will receive your package also on Monday.)
May 16, 2013, 01:47:40 PM
4 Departed Facility in HONG KONG - HONG KONG HONG KONG - HONG KONG 17:32
Yours is probably in the air. Mine hasn't even been scanned.
May 16, 2013, 01:45:39 PM
bitpop, is your DHL tracking updating? Mine still says Hong Hong.
hey, mine is also still in HK.(
Thursday, May 16, 2013
4 Departed Facility in HONG KONG - HONG KONG HONG KONG - HONG KONG 17:32
3 Processed at HONG KONG - HONG KONG HONG KONG - HONG KONG 17:17
2 Arrived at Sort Facility HONG KONG - HONG KONG HONG KONG - HONG KONG 06:40
1 Shipment picked up HONG KONG - HONG KONG 01:28
May 16, 2013, 01:34:07 PM
My 20 are almost here. ATX 650 psu ready!
bitpop, is your DHL tracking updating? Mine still says Hong Hong.
May 16, 2013, 01:28:10 PM
My 20 are almost here. ATX 650 psu ready!
May 16, 2013, 01:21:57 PM
Okay, been mining for about 30 mins now, with power from the PSU and going strong, updated my earlier posts too as It was my fault that I didn't notice the not working green light on the power brick 
+1 to BlackArrow, good support and quick shipping !
Will be buying more in the coming days !
Thanks!
EDIT Screens ! (PS, restarted miner a few mins ago)
+1 to BlackArrow, good support and quick shipping !
Will be buying more in the coming days !
Thanks!
EDIT Screens ! (PS, restarted miner a few mins ago)
Jump to: