I turned off my firewall and now I have 15 connections but still unable to sync
Topic: Discussion on Legacy SilkCoin wallet to help late swappers to New Silk (SLK) - page 5. (Read 8046 times)
November 06, 2016, 02:17:11 PM
November 06, 2016, 12:39:08 PM
Ok, it's back up, but I may have to bring it down a couple of time throughout the day.
CPU usage goes to 100% when I do a silkcoind getinfo
I did manage to do a silkcoind getconnectioncoun an I'm showing 14 connections after the restart.
I added txindex to my conf file and that seems to be helping as long as I am patient and don't try a getinfo for a while
These are the entries in my conf file, less of course username, password, and all the addnodes
port=16666
rpcport=16667
daemon=1
server=1
listen=1
txindex=1
maxconnections=128
staking=0
stakegen=0
reservebalance=99999999
CPU usage goes to 100% when I do a silkcoind getinfo
I did manage to do a silkcoind getconnectioncoun an I'm showing 14 connections after the restart.
I added txindex to my conf file and that seems to be helping as long as I am patient and don't try a getinfo for a while
These are the entries in my conf file, less of course username, password, and all the addnodes
port=16666
rpcport=16667
daemon=1
server=1
listen=1
txindex=1
maxconnections=128
staking=0
stakegen=0
reservebalance=99999999
November 06, 2016, 10:41:03 AM
I think I may have broken my daemon to the point that I may need to reboot the vm after I shutdown the daemon, so it may appear to be offline for a bit, hopefully not more than 15 minutes. What happened is this;
I went back to the original ann for Silkcoin to get the specs;
Specifications
Block time: 1 minute
Maximum POW supply: ~45 million
Difficulty retarget: every block
Stake interest: 2% annually
Min transaction fee: 0.0001 SC
Fees are paid to miners
Confirmations: 10, maturity: 350
Minimum stake age: 12 hours - No max age
P2P port: 16666, RPC port: 16667
I should have looked at the original thread when we first started this.
Because a transaction takes 10 confirmations and then 350 confirmations before mature for staking
Based on that, I created 25 addresses in the daemon wallet and started sending 2 Silkcoins to each address
The first round of 25 worked pretty well, but I got carried away and ran it 2, 3, or 4 more times so I have 75 to 125 transactions processing through the daemon.
Needless to say after finally going to bed and now waking up, the vm is and has been at 100% CPU, more than likely all night long since around 3am
I just stopped the daemon and am waiting for the process to end, then I'll reboot.
I'll post when it's back online
I went back to the original ann for Silkcoin to get the specs;
Specifications
Block time: 1 minute
Maximum POW supply: ~45 million
Difficulty retarget: every block
Stake interest: 2% annually
Min transaction fee: 0.0001 SC
Fees are paid to miners
Confirmations: 10, maturity: 350
Minimum stake age: 12 hours - No max age
P2P port: 16666, RPC port: 16667
I should have looked at the original thread when we first started this.
Because a transaction takes 10 confirmations and then 350 confirmations before mature for staking
Based on that, I created 25 addresses in the daemon wallet and started sending 2 Silkcoins to each address
The first round of 25 worked pretty well, but I got carried away and ran it 2, 3, or 4 more times so I have 75 to 125 transactions processing through the daemon.
Needless to say after finally going to bed and now waking up, the vm is and has been at 100% CPU, more than likely all night long since around 3am
I just stopped the daemon and am waiting for the process to end, then I'll reboot.
I'll post when it's back online
November 06, 2016, 02:49:27 AM
MCDev
should we add :16666 to the conf file after the nodes as well?
You seem to know these things better
should we add :16666 to the conf file after the nodes as well?
You seem to know these things better
To be honest with you, I always remove the port in my conf files. I know that in a few of my posts I did have the port included which was an oversight. I honestly don't know if it makes a difference. I know that on my daemon vms, I only open the firewall to the single port number to coin is using for p2p, in this case 16666
November 06, 2016, 02:45:49 AM
It's a bit of mess in the main thread for now
lots of silent investors till now, just surfaced and want mooooney back
lots of silent investors till now, just surfaced and want mooooney back
I wish we knew how much they have in and calling themselves investors. I wanted sooooooo badly to say something like "it takes 5+ BTC value to call yourself and investor" in the post I made a few minutes ago.
I was about 75% sure they wouldn't release on the 5th. It doesn't matter to me. I only wish they would have made an announcement early in the week, It wouldn't have stopped the "I want my money back" crap but it would have squashed the claims for lack of communication.
November 06, 2016, 12:37:34 AM
It's a bit of mess in the main thread for now
lots of silent investors till now, just surfaced and want mooooney back
lots of silent investors till now, just surfaced and want mooooney back
November 06, 2016, 12:14:59 AM
suddenly this thread and the work we are doing seems extra important.
McDev, i can't run an instance on my main box but i'd be willing to get some thing setup to be a dedicated node. I'll pm you when i get a min.
Still no movement from my wallets. I am closing the one for 24 hours to see how that helps the coins mature. Though i feel like the maturity issues will suss out once we get blocks moving regularly.
I have more to post but have to run. i'll get back in here tomorrow.
cheers fellas.
McDev, i can't run an instance on my main box but i'd be willing to get some thing setup to be a dedicated node. I'll pm you when i get a min.
Still no movement from my wallets. I am closing the one for 24 hours to see how that helps the coins mature. Though i feel like the maturity issues will suss out once we get blocks moving regularly.
I have more to post but have to run. i'll get back in here tomorrow.
cheers fellas.
November 06, 2016, 12:03:21 AM
MCDev
should we add :16666 to the conf file after the nodes as well?
You seem to know these things better
should we add :16666 to the conf file after the nodes as well?
You seem to know these things better
November 06, 2016, 12:01:21 AM
Also, aside from being online, make sure your firewall allows traffic in out on port 16666 if you want inbound connections.
You can also add my daemon as a node.
45.76.0.136
added to the conf.file post You can also add my daemon as a node.
45.76.0.136
November 05, 2016, 11:41:38 PM
I am unable to sync, if I do manage, I will be more than happy to stake.
Just leave your wallet onI'm not able to add you as a node
My wallet won't connect to yours no matter what
Are you online?
I'll try the last version
Also, aside from being online, make sure your firewall allows traffic in out on port 16666 if you want inbound connections.
You can also add my daemon as a node.
45.76.0.136
November 05, 2016, 09:28:19 PM
I am unable to sync, if I do manage, I will be more than happy to stake.
Just leave your wallet onI'm not able to add you as a node
My wallet won't connect to yours no matter what
Are you online?
I'll try the last version
November 05, 2016, 08:12:49 PM
I am unable to sync, if I do manage, I will be more than happy to stake.
November 05, 2016, 03:44:38 PM
Hey guys,
are I correct in my assertion that staking is required for any movement in the blockchain?
are I correct in my assertion that staking is required for any movement in the blockchain?
You are correct. If you have some to spare it would help us out if you staked them.
November 05, 2016, 02:16:58 PM
I cant sync again
November 05, 2016, 01:11:43 PM
No change as far as the status of me staking anything, still synced and now at 18 connections
"version" : "v1.1.0.21-g32a928e",
"protocolversion" : 60016,
"walletversion" : 60000,
"balance" : 354.99920000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 1758735,
"timeoffset" : 0,
"moneysupply" : 44040833.90213142,
"connections" : 18,
"proxy" : "",
"ip" : "45.76.0.136",
"version" : "v1.1.0.21-g32a928e",
"protocolversion" : 60016,
"walletversion" : 60000,
"balance" : 354.99920000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 1758735,
"timeoffset" : 0,
"moneysupply" : 44040833.90213142,
"connections" : 18,
"proxy" : "",
"ip" : "45.76.0.136",
November 05, 2016, 11:19:09 AM
Still struggling to get my coins out of staking. There just isn't enough network activity. I currently have 300k silkcoin tied up. Not good.
I didn't know you have coins stuck in stakingI guess you tried everything already
November 05, 2016, 10:56:43 AM
Still struggling to get my coins out of staking. There just isn't enough network activity. I currently have 300k silkcoin tied up. Not good.
November 05, 2016, 10:05:30 AM
they do show up in the explorer
November 05, 2016, 09:44:35 AM
also, none of my confirmed coins have arrived into my weaver wallet yet, does anyone know when they will likely arrive?
Do they show up in the explorer?
They might be doing manual updates and I know they are working their butts off getting ready for the Dark release.
I would not want to be in their shoes today
November 05, 2016, 09:31:10 AM
also, none of my confirmed coins have arrived into my weaver wallet yet, does anyone know when they will likely arrive?
Jump to: