Topic: [DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi - page 45. (Read 82114 times)
why ?
This is a great idea. When I upgrade s1 to s3 blades I was hoping I could still use the old blades. How about running s1 & s3 blades on a single controller.
DoubleDD
DoubleDD
[DIY] AllCoinMiner's Power Supply Sizing Guide
[DIY] AllCoinMiner's Solar Energy Setup for Mining DIY Research going on
[DIY] AllCoinMiner's Antminer S1/S3 Blade on Raspberry Pi or on a Single ControlBoardBounty Offered
[GUIDE] Mining Profitablility Discussions
Project Aim:
1. To run Antminer S3 or the previous release Antminer S1, run with the support of a Raspberry-Pi instead of the default controller.
2. To add more than two blades with one Raspberry-Pi or in the same default controller.
3. To consolidate more than two miners in to a single frame or a mod-ed frame
If the project progresses well and anyone can demonstrate and proved a working method/hack to DIY practically, I will have a bounty for them.
1. The Reward is $100 equivalent of BTC
2. Another contribution to the bounty from googlemaster1
Conditions to claim the Reward
1. Give a DIY guide to run more than 2 Antminer "S3" blades in one controller.
2. Any controller like the default one or Raspi or any other can be used.
3. Reward is only if it works in S3, but you can experiment with S1.
4. There is a time limit for this reward. Currently its 3 months. But will extend depending on the situation.
5. If its a group of people achieving this, reward will be given to the top contributor
I'm inviting all expert and novice members active participation to achieve this.
[DIY] AllCoinMiner's Solar Energy Setup for Mining DIY Research going on
[DIY] AllCoinMiner's Antminer S1/S3 Blade on Raspberry Pi or on a Single ControlBoardBounty Offered
[GUIDE] Mining Profitablility Discussions
Antminer S1/S3 Blade on Raspberry Pi or on a Single ControlBoard
[DIY][/color]
http://www.raspberrypi.org/
[DIY][/color]
http://www.raspberrypi.org/
Project Aim:
1. To run Antminer S3 or the previous release Antminer S1, run with the support of a Raspberry-Pi instead of the default controller.
2. To add more than two blades with one Raspberry-Pi or in the same default controller.
3. To consolidate more than two miners in to a single frame or a mod-ed frame
If the project progresses well and anyone can demonstrate and proved a working method/hack to DIY practically, I will have a bounty for them.
1. The Reward is $100 equivalent of BTC
2. Another contribution to the bounty from googlemaster1
Conditions to claim the Reward
1. Give a DIY guide to run more than 2 Antminer "S3" blades in one controller.
2. Any controller like the default one or Raspi or any other can be used.
3. Reward is only if it works in S3, but you can experiment with S1.
4. There is a time limit for this reward. Currently its 3 months. But will extend depending on the situation.
5. If its a group of people achieving this, reward will be given to the top contributor
I'm inviting all expert and novice members active participation to achieve this.
Jump to: