DRILLBIT SYSTEM Miners - Avalon range available - Now $104.99! - page 135.

milkbottlec

member

Activity: 95

Merit: 10

Just made a payment on PayPal, do I need to send any email to confirm?

Its About Sharing

legendary

Activity: 1442

Merit: 1000

Antifragile

Quote from: Barntech on August 20, 2013, 06:29:00 AM

Quote from: Its About Sharing on August 20, 2013, 06:23:44 AM

Just sent $310 via paypal for one complete system - ID 3F017843PT660442P

Please check.

Good luck with the GB!

IAS

Got it. Thanks IAS. :-)

Put me down for another one. So, of course, just see I placed the 2 orders the same day so I get the backpane included and shipped in the same box.

Conf - 8AR38252L7183463B

Thanks again
IAS

ps - Had problems with pay pal last time through, a few failed transactions, just make sure there were no double or triple charges!

Skriglitz

member

Activity: 61

Merit: 10

Btw barn, for those that wont be using a power supply to run their boards, what is your estimated 5v and/or 12v amp consumption for non oc?

vulgartrendkill

hero member

Activity: 518

Merit: 500

I`ll definately be looking at all my options

Thanks guys

Skriglitz

member

Activity: 61

Merit: 10

Quote from: vulgartrendkill on August 20, 2013, 11:32:34 AM

To answer your questions guys,

at the moment I do not have a seperate psu to enable powering of the boards. However I do already have 10 BE hashing away. My idea was to keep everything neat and tidy.

However I do also have a single and 2 jalapenos on order. Once I get the jallies, I`ll see what space is like and we`ll see.

Not only that visible hashing hardware makes my better half come out in hives...

It may not be neat but you might do what I'm doing. I have a 120v AC to 4 pin molex power brick that I'm going to use. They run about 15-20 on amazon, ebay, and possibly newegg. That is assuming the required 5v or 12v amps is not more than the brick will supply

Barntech

sr. member

Activity: 266

Merit: 250

Quote from: Pinwheel on August 20, 2013, 07:09:56 AM

I'm considering to place an order for few hundred chips by the end of this week (hope it still be available). Price is still same USD 25 per chip. When chips can be shipped, any idea? On front page you wrote about escrow is it still an option for chips at least.

Hey Pinwheel,

Are you interested in plain chips, or assembly also? By all means, grab a few hundred. The price is the same for all the chips. We have been told early October delivery on the chips. Assembly will be a couple weeks from when get the chips. We are not doing escrow on this one, mostly to have quick easy access to the money when we need it for the chips. I have been verifed by John K https://bitcointalksearch.org/topic/m.2917573 and we accept paypal payments as an extra security blanket. We're not going to run away with your money.

Also, happy to have a chat on the phone if you like, PM me for my phone number.

Cheers

Barntech

vulgartrendkill

hero member

Activity: 518

Merit: 500

To answer your questions guys,

at the moment I do not have a seperate psu to enable powering of the boards. However I do already have 10 BE hashing away. My idea was to keep everything neat and tidy.

However I do also have a single and 2 jalapenos on order. Once I get the jallies, I`ll see what space is like and we`ll see.

Not only that visible hashing hardware makes my better half come out in hives...

bcollan

member

Activity: 69

Merit: 10

Hi Barntech,

Sent $930 yesterday via PayPal for 3 complete boards.
This is to associate my screen name here with my PayPal account.

PayPal Transaction ID: 2RP193088N8153639

r00t$

member

Activity: 117

Merit: 10

Just sent payment VIA PayPal for 1 fully assembled DRILLBIT board...$310

Transaction ID 22696829DG618884T

Thanks!

Skriglitz

member

Activity: 61

Merit: 10

Quote from: milkbottlec on August 20, 2013, 07:38:58 AM

Quote from: vulgartrendkill on August 20, 2013, 07:28:11 AM

Hi Barntech,

Could you confirm that you have received my payment for 3 thumb units?

Thanks

Why did you go for 3 USB rather than a board? :p

Thats my thoughts.. But its possible that they are gifts or just don't have a way to power the boards like an extra psu

milkbottlec

member

Activity: 95

Merit: 10

Quote from: vulgartrendkill on August 20, 2013, 07:28:11 AM

Hi Barntech,

Could you confirm that you have received my payment for 3 thumb units?

Thanks

Why did you go for 3 USB rather than a board? :p

vulgartrendkill

hero member

Activity: 518

Merit: 500

Hi Barntech,

Could you confirm that you have received my payment for 3 thumb units?

Thanks

Pinwheel

sr. member

Activity: 378

Merit: 250

I'm considering to place an order for few hundred chips by the end of this week (hope it still be available). Price is still same USD 25 per chip. When chips can be shipped, any idea? On front page you wrote about escrow is it still an option for chips at least.

Barntech

sr. member

Activity: 266

Merit: 250

Quote from: synapse on August 20, 2013, 06:44:17 AM

Quote from: Barntech on August 19, 2013, 09:34:30 PM

Quote from: milkbottlec on August 19, 2013, 04:46:26 PM

That's great. Will you release a cooling system with it so to be like pre-built OC? So maybe before shipment we could choose and pay for extra for the cooling system pre-built in it?

Does this group buy need to clear all the chips before completing? Or it will be delivered anyway in late Oct?
I will pbb buy soon

will there be any updates soon?

Yes we're looking into providing cooling as an optional extra, either in the form of a heatsink or a case with fans built in. See where we get to on this. Priority first is to get the boards happening, and then we'll look at the other bits and pieces.

Regarding clearing all the chips, i have asnswered this one a few times now, though i know the thread is a bit long and tedious to read through. I'm gonna build an FAQ section on the front page to deal with things like this. So the answer is, if there are few enough chips left that we can afford to buy the rest out once october rolls around, then we will. My rough guess was 500. Lets see how we're looking as we get closer.

Cheers

Barntech

Will the boards have thermal vias to transfer heat to the other side? Much like the klondike avalon based board? You could easily bolt on your own heatsink then.

Yes this is the design. You will always have the option to bolt on a heatsink, but we may also offer it as a bundled option.

synapse

member

Activity: 79

Merit: 10

Quote from: Barntech on August 19, 2013, 09:34:30 PM

Quote from: milkbottlec on August 19, 2013, 04:46:26 PM

That's great. Will you release a cooling system with it so to be like pre-built OC? So maybe before shipment we could choose and pay for extra for the cooling system pre-built in it?

Does this group buy need to clear all the chips before completing? Or it will be delivered anyway in late Oct?
I will pbb buy soon

will there be any updates soon?

Yes we're looking into providing cooling as an optional extra, either in the form of a heatsink or a case with fans built in. See where we get to on this. Priority first is to get the boards happening, and then we'll look at the other bits and pieces.

Regarding clearing all the chips, i have asnswered this one a few times now, though i know the thread is a bit long and tedious to read through. I'm gonna build an FAQ section on the front page to deal with things like this. So the answer is, if there are few enough chips left that we can afford to buy the rest out once october rolls around, then we will. My rough guess was 500. Lets see how we're looking as we get closer.

Cheers

Barntech

Will the boards have thermal vias to transfer heat to the other side? Much like the klondike avalon based board? You could easily bolt on your own heatsink then.

Barntech

sr. member

Activity: 266

Merit: 250

Quote from: Its About Sharing on August 20, 2013, 06:23:44 AM

Just sent $310 via paypal for one complete system - ID 3F017843PT660442P

Please check.

Good luck with the GB!

IAS

Got it. Thanks IAS. :-)

Its About Sharing

legendary

Activity: 1442

Merit: 1000

Antifragile

Just sent $310 via paypal for one complete system - ID 3F017843PT660442P

Please check.

Good luck with the GB!

IAS

Barntech

sr. member

Activity: 266

Merit: 250

Quote from: libertybuck on August 20, 2013, 05:43:41 AM

Hi Barntech,

I have just sent you payment for 32 chips with PayPal.

Transaction ID: 90J458500N428250B

Payment Total: $832.00 USD

Please check your PayPal account.

Regards

libertybuck

Got it.

Thanks liberty.

libertybuck

full member

Activity: 137

Merit: 100

Hi Barntech,

I have just sent you payment for 32 chips with PayPal.

Transaction ID: 90J458500N428250B

Payment Total: $832.00 USD

Please check your PayPal account.

Regards

libertybuck

Barntech

sr. member

Activity: 266

Merit: 250

Quote from: erk on August 20, 2013, 03:47:19 AM

Quote from: Barntech on August 20, 2013, 03:35:18 AM

Quote from: libertybuck on August 20, 2013, 02:43:54 AM

Hi Barntech,

Quote

To calculate BTC required: Multiply the number of chips desired by $25 (cost=chips*US$25) to arrive at the $US dollar amount. Then times this amount but the current exchange rate (currently 1BTC = US$104).

I want to order chips with BTC. Today MTgox exchange rate is $120/btc. So, to calculate btc amount which exchange rate should I use ?

Regards

libertybuck

Hey.

Yes, sorry, i've been busy and haven't updated. Go with US $120 for the exchange rate. I'll go change that now.

Cheers

Barntech

Have you considered opening up a merchant account on bitpay.com? I opened one recently and it's reasonably painless. Does on the spot BTC/USD calc and can pay you automatically in AUD.

Yes considered it. The 1% fee is the main turn off, though i may still end up going with it for conveniece. I had the MTGOX pay button up for a while but there's a few things about how it works that i don't like, like not giving you bitcoin transaction information. Maybe bitpay is the way. For now i'll just try to keep up with fluctuations.

Also, genreally steering clear of AUD for now because the chip purchase will be in USD.

Cheers

Topic: DRILLBIT SYSTEM Miners - Avalon range available - Now $104.99! - page 135. (Read 273816 times)