DRILLBIT SYSTEM Miners - Avalon range available - Now $104.99! - page 88.

rocks

legendary

Activity: 1153

Merit: 1000

Quote from: Barntech on October 10, 2013, 10:46:35 AM

Delivery schedule is still looking good for late Oct / early Nov. Batch 2 shouldn't be very far behind batch 1, and potentially even ship at the same time if all goes well. I'm currently making efforts to ensure that we can do both batches together.

Is batch 2 ordered? Or does it require all of the boards in that batch to be ordered and paid for first? Sorry if this was mentioned earlier.

Barntech

sr. member

Activity: 266

Merit: 250

Quote from: southerngentuk on October 10, 2013, 03:06:58 AM

The new price is welcome, however can you give any further updates.

How's the prototype going ?
Any update in chip dispatch batch 1&2 ?
how long from receiving chips to delivery ?

Please don't think I doubt you. I don't. I just have learn't the hard way. 2-3 weeks delay and were busted.

It's pretty close, am on the fence for a couple more.

The prototyping is coming along. The comms are looking solid on the boards, comunication between the ATMEL processor chip and the bitfury chips is all working. The cgminer side of things is all sorted. The remaining pieces of the puzzle are getting the USB protocols working and making sure the bootloader is functioning correctly for future firmware updates. Almost there!

Update on chips is that they are on the brink of being sent. Should be in the post in the next couple of days.

From receiving chips to delivery will be 2-3 weeks, though i am exploring options to potentially cut this down. See what i can do.

Barntech

Barntech

sr. member

Activity: 266

Merit: 250

Quote from: tk1337 on October 09, 2013, 10:11:19 PM

Quote from: Barntech on October 09, 2013, 11:54:15 AM

Hello people.

I'm very pleased to announce a price drop on all Drillbit System hardware for Batch 2 Grin

Drillbit Thumb - 0.8 BTC
Drillbit 8 Board - 2.5 BTC
Drillbit Miniplane - 0.3 BTC
Drillbit Double Scroll - 0.3 BTC

You'll see I've changed the front page quite a bit. Much that was on there is no longer relevant. For now payments will only be accepted in BTC. I think most of you know the deal with PAYPAL. We may reinstate the third party paypal option, but for now i'd rather keep it to Bitcoin, after all, that's why we're all here right? If anyone is desperate to pay with Paypal or Bank Transfer, PM me, it's possible, but please, go get some BTC.

If we get all these miners bought up quick, batch 2 should not be far behind batch 1.

Cheers

Barntech

I'm sure all of what I'm about to ask is located somewhere in the 61 pages of this thread, but...

What's your delivery schedule for batch #1? Just trying to estimate how "far" behind batch #2 would be
Looks like a ATX adapter to the backplane, is that correct?

Delivery schedule is still looking good for late Oct / early Nov. Batch 2 shouldn't be very far behind batch 1, and potentially even ship at the same time if all goes well. I'm currently making efforts to ensure that we can do both batches together.

Barntech

sr. member

Activity: 266

Merit: 250

Quote from: Thyatis on October 09, 2013, 07:05:23 PM

will a rasp pi be able to mine with these?

Yes you can use a raspberry pi with cgminer to run these. Also, good news is that we've been working with Kano and Con from cgminer and the new cgminer update has full bitfury support. This will include our boards. Grin

Barntech

sr. member

Activity: 266

Merit: 250

Quote from: erk on October 09, 2013, 06:27:51 PM

Quote from: techman05 on October 09, 2013, 06:13:04 PM

does make me twitch to not stand too close to whatever pool you as a person decide to over take.

The one thought I haven't thought to though while on the subject of chips . Are the chips on the assembled boards potentialy upgradable?

Who knows, I mean if Bitfury decide to release a 2nd gen chip, say 28nm, they might choose a different chip package like BFL have done for their 28nm 2nd gen chip. I like the current small packages that don't need expensive heat sinks. although you need way more off them to get the same GH/s. the trade off is you end up having a much higher component count on each board, but the board is not covered by a massive heat sink assembly, and you can produce a single chips USB powered device.

This is possible but it will really depend on the deign of the chips. In most likelihood, they will have different specs and require different circuitry. Generally speaking its going to be better to design new boards for new chips to ensure that the design is optimal.

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

Quote from: southerngentuk on October 10, 2013, 03:06:58 AM

The new price is welcome, however can you give any further updates.

How's the prototype going ?
Any update in chip dispatch batch 1&2 ?
how long from receiving chips to delivery ?

Please don't think I doubt you. I don't. I just have learn't the hard way. 2-3 weeks delay and were busted.

It's pretty close, am on the fence for a couple more.

I think he is away atm, but we are working on things in the time area, and hopefully will have good news later today.

techman05

hero member

Activity: 546

Merit: 500

If I could get someone to buy my preorder for my jalapeno at retail price , I'd get a few more too. Someone will eventually want it for posterity value for that price at least I hope.

southerngentuk

sr. member

Activity: 1316

Merit: 254

Sugars.zone | DatingFi - Earn for Posting

The new price is welcome, however can you give any further updates.

How's the prototype going ?
Any update in chip dispatch batch 1&2 ?
how long from receiving chips to delivery ?

Please don't think I doubt you. I don't. I just have learn't the hard way. 2-3 weeks delay and were busted.

It's pretty close, am on the fence for a couple more.

Barntech

sr. member

Activity: 266

Merit: 250

Quote from: bobsag3 on October 09, 2013, 01:36:31 PM

Yall can thank me for buying 2/3rds of the reel so barn can get the chips ASAP and much cheaper.

Yes massive thanks to Bobsag for helping make this possible! Grin

tk1337

sr. member

Activity: 266

Merit: 250

Quote from: Barntech on October 09, 2013, 11:54:15 AM

Hello people.

I'm very pleased to announce a price drop on all Drillbit System hardware for Batch 2 Grin

Drillbit Thumb - 0.8 BTC
Drillbit 8 Board - 2.5 BTC
Drillbit Miniplane - 0.3 BTC
Drillbit Double Scroll - 0.3 BTC

You'll see I've changed the front page quite a bit. Much that was on there is no longer relevant. For now payments will only be accepted in BTC. I think most of you know the deal with PAYPAL. We may reinstate the third party paypal option, but for now i'd rather keep it to Bitcoin, after all, that's why we're all here right? If anyone is desperate to pay with Paypal or Bank Transfer, PM me, it's possible, but please, go get some BTC.

If we get all these miners bought up quick, batch 2 should not be far behind batch 1.

Cheers

Barntech

I'm sure all of what I'm about to ask is located somewhere in the 61 pages of this thread, but...

What's your delivery schedule for batch #1? Just trying to estimate how "far" behind batch #2 would be
Looks like a ATX adapter to the backplane, is that correct?

chadtn

sr. member

Activity: 672

Merit: 250

Quote from: techman05 on October 09, 2013, 07:28:21 PM

Quote from: erk on October 09, 2013, 07:15:23 PM

Quote from: Thyatis on October 09, 2013, 07:05:23 PM

will a rasp pi be able to mine with these?

I would imagine that someone will compile the miner for rPi at some point. I was actually just thinking of putting the Drillbit boards into an old PC case and fitting either a rPi or an Intel Atom board to run it, as it would be nicely self contained with the PSU and everything in the one box.

If you get a good deal make sure to note it here or drill bit system forum. I'm not planning to dream too much till I've run my first and see where I can put it more tasteful, all I know is the pi is not my dream boat. I'm not sure if its overheating or not powered enough for after an hour or two not showing anything.

So far my Pi has been running rock solid. It's been mining for me 24/7 for the past two months. The only time it has stopped is last night when I rebooted it to test some changes I made in my configuration after updating cgminer. I wanted to make sure that in the unlikely event I have a power failure that it would start back to mining unattended as soon as power is restored. I've got enough batteries hooked to the UPS now that at a 1000 watt draw my system would continue to hash away for more than thirty hours. lol. I lucked into a bunch of free equipment. heh..

Chad

techman05

hero member

Activity: 546

Merit: 500

Quote from: lajz99 on October 09, 2013, 07:16:12 PM

Quote from: Thyatis on October 09, 2013, 07:05:23 PM

will a rasp pi be able to mine with these?

Assuming bfgminer/cgminer are updated I don't see why not! That's my plan, I've got one ready and waiting!

As long as we don't have to use a too weird setup, thats my plan too unless I trip over another mining program that fits my needs.

techman05

hero member

Activity: 546

Merit: 500

Quote from: erk on October 09, 2013, 07:15:23 PM

Quote from: Thyatis on October 09, 2013, 07:05:23 PM

will a rasp pi be able to mine with these?

I would imagine that someone will compile the miner for rPi at some point. I was actually just thinking of putting the Drillbit boards into an old PC case and fitting either a rPi or an Intel Atom board to run it, as it would be nicely self contained with the PSU and everything in the one box.

If you get a good deal make sure to note it here or drill bit system forum. I'm not planning to dream too much till I've run my first and see where I can put it more tasteful, all I know is the pi is not my dream boat. I'm not sure if its overheating or not powered enough for after an hour or two not showing anything.

lajz99

hero member

Activity: 756

Merit: 500

Quote from: Thyatis on October 09, 2013, 07:05:23 PM

will a rasp pi be able to mine with these?

Assuming bfgminer/cgminer are updated I don't see why not! That's my plan, I've got one ready and waiting!

erk

hero member

Activity: 826

Merit: 500

Quote from: Thyatis on October 09, 2013, 07:05:23 PM

will a rasp pi be able to mine with these?

I would imagine that someone will compile the miner for rPi at some point. I was actually just thinking of putting the Drillbit boards into an old PC case and fitting either a rPi or an Intel Atom board to run it, as it would be nicely self contained with the PSU and everything in the one box.

Thyatis

sr. member

Activity: 252

Merit: 250

will a rasp pi be able to mine with these?

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

Quote from: techman05 on October 09, 2013, 06:13:04 PM

does make me twitch to not stand too close to whatever pool you as a person decide to over take.

The one thought I haven't thought to though while on the subject of chips . Are the chips on the assembled boards potentialy upgradable?

I will only be keeping a small portion for myself. The rest will probably be sold/ group buy'ed out.

erk

hero member

Activity: 826

Merit: 500

Quote from: techman05 on October 09, 2013, 06:13:04 PM

does make me twitch to not stand too close to whatever pool you as a person decide to over take.

The one thought I haven't thought to though while on the subject of chips . Are the chips on the assembled boards potentialy upgradable?

Who knows, I mean if Bitfury decide to release a 2nd gen chip, say 28nm, they might choose a different chip package like BFL have done for their 28nm 2nd gen chip. I like the current small packages that don't need expensive heat sinks. although you need way more off them to get the same GH/s. the trade off is you end up having a much higher component count on each board, but the board is not covered by a massive heat sink assembly, and you can produce a single chips USB powered device.

Zeek_W

sr. member

Activity: 336

Merit: 250

Awesome work! Although I was hoping it was news the batch 1 chips arrived haha

techman05

hero member

Activity: 546

Merit: 500

does make me twitch to not stand too close to whatever pool you as a person decide to over take.

The one thought I haven't thought to though while on the subject of chips . Are the chips on the assembled boards potentialy upgradable?

Topic: DRILLBIT SYSTEM Miners - Avalon range available - Now $104.99! - page 88. (Read 273827 times)