http://miner.ebang.com.cn/en/index.html
Is this the official site? it seems very sketchy to me? also does this run like the Avalon where you have to buy a separate controller?
very interested in a few of these if they are legit. but ive been scammed before and I am very hesitant.
Topic: Ebit e9 miner with 6.8Th/s from Ebang company a new rival for existing producers - page 16. (Read 80738 times)
November 06, 2017, 01:09:42 AM
November 04, 2017, 02:48:07 AM
Well I think if you would upgrade to a new firmware you would get the access to decide between CH / EN like they shipped to me. In the further posts ppl explain how.
The admin access to the miners does allows EN/CH; I am referring to the tool they supply on their website
It will switch to english if your windows is in english. Mine is working ok, and application is waist of time.
Does not switch to english on either of my computers?
Their support sent me an English version of the miner tool EbiteMinerMini[EN]V1.0.2.50.7z
It actually works pretty well, allowing you to set the frequency and fan speed, amount other things
fan speed is directly linked to pll so you can not change it
November 03, 2017, 12:09:25 PM
Well I think if you would upgrade to a new firmware you would get the access to decide between CH / EN like they shipped to me. In the further posts ppl explain how.
The admin access to the miners does allows EN/CH; I am referring to the tool they supply on their website
It will switch to english if your windows is in english. Mine is working ok, and application is waist of time.
Does not switch to english on either of my computers?
Their support sent me an English version of the miner tool EbiteMinerMini[EN]V1.0.2.50.7z
It actually works pretty well, allowing you to set the frequency and fan speed, amount other things
November 03, 2017, 04:30:42 AM
Our unit did not respond to an IP scanner either, wireshark is the way to go
November 02, 2017, 09:23:11 PM
Thanks.
Any manual or information on the web interface.
Not that I'm aware of.
November 02, 2017, 03:13:28 PM
Just received 2 x E9 T after waiting a month and a lot of pestering. I am in the US.
One seems to run fine the other flashing red light and does not show up, searched with advanced ip scanner and nothing.
Tried about 50 times to call hotline for service, get the recording and then it drops the call.
Has anyone dealt with their service. Says a whole lot of impressive things. Is any of it real?
One seems to run fine the other flashing red light and does not show up, searched with advanced ip scanner and nothing.
Tried about 50 times to call hotline for service, get the recording and then it drops the call.
Has anyone dealt with their service. Says a whole lot of impressive things. Is any of it real?
Advanced IP scanner won't do anything if the machine is on a different subnet than your desktop.
Download Wireshark, run it, and look for ARP requests coming from the miner to get what IP it is assigned.
Once you have that IP, change your IP to match that network and connect to it.
Thanks.
Any manual or information on the web interface.
November 02, 2017, 03:00:13 PM
Just received 2 x E9 T after waiting a month and a lot of pestering. I am in the US.
One seems to run fine the other flashing red light and does not show up, searched with advanced ip scanner and nothing.
Tried about 50 times to call hotline for service, get the recording and then it drops the call.
Has anyone dealt with their service. Says a whole lot of impressive things. Is any of it real?
One seems to run fine the other flashing red light and does not show up, searched with advanced ip scanner and nothing.
Tried about 50 times to call hotline for service, get the recording and then it drops the call.
Has anyone dealt with their service. Says a whole lot of impressive things. Is any of it real?
Advanced IP scanner won't do anything if the machine is on a different subnet than your desktop.
Download Wireshark, run it, and look for ARP requests coming from the miner to get what IP it is assigned.
Once you have that IP, change your IP to match that network and connect to it.
November 02, 2017, 02:44:19 PM
Just received 2 x E9 T after waiting a month and a lot of pestering. I am in the US.
One seems to run fine the other flashing red light and does not show up, searched with advanced ip scanner and nothing.
Tried about 50 times to call hotline for service, get the recording and then it drops the call.
Has anyone dealt with their service. Says a whole lot of impressive things. Is any of it real?
Anybody have manual or any information on the web interface.
One seems to run fine the other flashing red light and does not show up, searched with advanced ip scanner and nothing.
Tried about 50 times to call hotline for service, get the recording and then it drops the call.
Has anyone dealt with their service. Says a whole lot of impressive things. Is any of it real?
Anybody have manual or any information on the web interface.
November 02, 2017, 02:34:41 PM
Well I think if you would upgrade to a new firmware you would get the access to decide between CH / EN like they shipped to me. In the further posts ppl explain how.
The admin access to the miners does allows EN/CH; I am referring to the tool they supply on their website
It will switch to english if your windows is in english. Mine is working ok, and application is waist of time.
Does not switch to english on either of my computers?
November 02, 2017, 06:07:09 AM
I skipped other order and payed for several avalons
November 02, 2017, 04:16:50 AM
Well, our E9 has cleared UK customs and is up and mining 
Like everybody else , the IP address on machine ( 192.168.80.140 ) beared no link to reality , 192.168.111.150 which is a bit random !
DHCP was NOT enable on the machine out of the box but wireshark and arc came to the rescue.
Now to decide whether to get another one
Like everybody else , the IP address on machine ( 192.168.80.140 ) beared no link to reality , 192.168.111.150 which is a bit random !
DHCP was NOT enable on the machine out of the box but wireshark and arc came to the rescue.
Now to decide whether to get another one
October 31, 2017, 08:02:54 AM
Well I think if you would upgrade to a new firmware you would get the access to decide between CH / EN like they shipped to me. In the further posts ppl explain how.
The admin access to the miners does allows EN/CH; I am referring to the tool they supply on their website
It will switch to english if your windows is in english. Mine is working ok, and application is waist of time.
October 31, 2017, 07:48:59 AM
Well I think if you would upgrade to a new firmware you would get the access to decide between CH / EN like they shipped to me. In the further posts ppl explain how.
The admin access to the miners does allows EN/CH; I am referring to the tool they supply on their website
October 31, 2017, 12:33:18 AM
I have almost all of my problems fixed. I found the EbiteMinerMini tool from the Ebang website http://miner.ebang.com.cn/en/tools.html
I see there is an english StringResource.xml file available in EbiteMinerMiniV1.0.2.51\language\en
Has anyone found how to switch the language to english?
I see there is an english StringResource.xml file available in EbiteMinerMiniV1.0.2.51\language\en
Has anyone found how to switch the language to english?
October 30, 2017, 09:00:45 PM
I just received 2 E9+ miners. After finding out that 192.168.80.140 was not the IP address, I am up and running.
A couple of questions:
Is there a manual for these? The manual link on the ebang website (miner.ebang.com.cn/en/manual.html) is blank
The reason I am asking, is that I may have fat-fingered one of the miners. It came up via DHCP and is mining just fine, but I can no longer access the admin console.
Is there a "restore factory settings"?
As discussed many times, these are loud. Can they be underclocked to reduce the fan requirement?
Does anyone have a good link for replacement fans that they recommend (Other than lmgtfy)
Thanks. ~nh
A couple of questions:
Is there a manual for these? The manual link on the ebang website (miner.ebang.com.cn/en/manual.html) is blank
The reason I am asking, is that I may have fat-fingered one of the miners. It came up via DHCP and is mining just fine, but I can no longer access the admin console.
Is there a "restore factory settings"?
As discussed many times, these are loud. Can they be underclocked to reduce the fan requirement?
Does anyone have a good link for replacement fans that they recommend (Other than lmgtfy)
Thanks. ~nh
One of mine came in with a dead fan. I have ordered some replacement fans and they came without connectors which are on their way from HK. If it works- I will pass along the details.
October 30, 2017, 07:27:50 PM
I just received 2 E9+ miners. After finding out that 192.168.80.140 was not the IP address, I am up and running.
A couple of questions:
Is there a manual for these? The manual link on the ebang website (miner.ebang.com.cn/en/manual.html) is blank
The reason I am asking, is that I may have fat-fingered one of the miners. It came up via DHCP and is mining just fine, but I can no longer access the admin console.
Is there a "restore factory settings"?
As discussed many times, these are loud. Can they be underclocked to reduce the fan requirement?
Does anyone have a good link for replacement fans that they recommend (Other than lmgtfy)
Thanks. ~nh
A couple of questions:
Is there a manual for these? The manual link on the ebang website (miner.ebang.com.cn/en/manual.html) is blank
The reason I am asking, is that I may have fat-fingered one of the miners. It came up via DHCP and is mining just fine, but I can no longer access the admin console.
Is there a "restore factory settings"?
As discussed many times, these are loud. Can they be underclocked to reduce the fan requirement?
Does anyone have a good link for replacement fans that they recommend (Other than lmgtfy)
Thanks. ~nh
October 29, 2017, 04:27:04 AM
Does anybody have had this problem and able to solve it with the Ebit E9 Plus 9Th/s miner?
Fans are not spinning at all.
0 rpm.
These are brand new Ebits.
I'm wondering if this is a hardware or a software issue.
These are hosted, so I'm not able to inspect them directly.
Fans are not spinning at all.
0 rpm.
These are brand new Ebits.
I'm wondering if this is a hardware or a software issue.
These are hosted, so I'm not able to inspect them directly.
Nothing happening at all? Or is it showing no number for the fan speed?
Fans are not spinning at all and it shows zero for the fan speed.
It ended up being only that the fans were connected in a wrong way.
And little faulty hardware, one hash board fried.
Be sure to do a very careful inspection for the hardware you order from Ebang..
HagssFIN could you link the page to buy a 9th miner?
I have this link I want to be sure it is good.
http://miner.ebang.com.cn/en/products.html
That is the right website.
They have few different date batches with different prices.
Be aware that price in invoice is always the same, no mater what price is listed on website. And invoice price is what you pay for VAT.
October 29, 2017, 03:46:20 AM
Does anybody have had this problem and able to solve it with the Ebit E9 Plus 9Th/s miner?
Fans are not spinning at all.
0 rpm.
These are brand new Ebits.
I'm wondering if this is a hardware or a software issue.
These are hosted, so I'm not able to inspect them directly.
Fans are not spinning at all.
0 rpm.
These are brand new Ebits.
I'm wondering if this is a hardware or a software issue.
These are hosted, so I'm not able to inspect them directly.
Nothing happening at all? Or is it showing no number for the fan speed?
Fans are not spinning at all and it shows zero for the fan speed.
It ended up being only that the fans were connected in a wrong way.
And little faulty hardware, one hash board fried.
Be sure to do a very careful inspection for the hardware you order from Ebang..
HagssFIN could you link the page to buy a 9th miner?
I have this link I want to be sure it is good.
http://miner.ebang.com.cn/en/products.html
That is the right website.
They have few different date batches with different prices.
October 28, 2017, 11:14:45 PM
Anybody knows the power consumption of E9 9T in terms of kwh?
1305W(-10%- +15%). 31.32ish Kwh per day. October 28, 2017, 11:04:20 PM
Anybody knows the power consumption of E9 9T in terms of kwh?
1305W(-10%- +15%). 31.32ish Kwh per day. Jump to: