Topic: Ebit e9 miner with 6.8Th/s from Ebang company a new rival for existing producers - page 17. (Read 80702 times)
October 28, 2017, 10:59:14 PM
Anybody knows the power consumption of E9 9T in terms of kwh?
October 28, 2017, 07:07:03 PM
So taking apart the update and playing with a hexeditor it seems the miner is a homebrew variant of cgminer 4.9.2 (I would guess a spinoff of bitmain's?) While this doesn't help anyone much, there is also a file in there that I *think* you might be able to alter the web login/username (change file re-zip everything and upload) Not 100% on that yet and I don't know enough about reverse engineering binaries to take the miner apart and add in the #xnsub patch.. and there may be some other issues with the whole idea. Someone better than me might want to look into it. Later (not today) I'll give a whirl at futzing with it and see if I can upload a changed upgrade and if it all dies, well hopefully I can at least change the bank1 bank2 thing and drop back to where it was. Still doesn't help with ssh creds, but hey..... it's a start at something.. maybe someone can find a way to upload a file that sets root password or if nothing else adds a user.
October 28, 2017, 11:34:46 AM
HagssFIN could you link the page to buy a 9th miner?
I have this link I want to be sure it is good.
http://miner.ebang.com.cn/en/products.html
I know you asked Haggs, but that's the page I ordered mine from.
October 28, 2017, 10:43:09 AM
Does anybody have had this problem and able to solve it with the Ebit E9 Plus 9Th/s miner?
Fans are not spinning at all.
0 rpm.
These are brand new Ebits.
I'm wondering if this is a hardware or a software issue.
These are hosted, so I'm not able to inspect them directly.
Fans are not spinning at all.
0 rpm.
These are brand new Ebits.
I'm wondering if this is a hardware or a software issue.
These are hosted, so I'm not able to inspect them directly.
Nothing happening at all? Or is it showing no number for the fan speed?
Fans are not spinning at all and it shows zero for the fan speed.
It ended up being only that the fans were connected in a wrong way.
And little faulty hardware, one hash board fried.
Be sure to do a very careful inspection for the hardware you order from Ebang..
HagssFIN could you link the page to buy a 9th miner?
I have this link I want to be sure it is good.
http://miner.ebang.com.cn/en/products.html
October 28, 2017, 09:29:14 AM
Does anybody have had this problem and able to solve it with the Ebit E9 Plus 9Th/s miner?
Fans are not spinning at all.
0 rpm.
These are brand new Ebits.
I'm wondering if this is a hardware or a software issue.
These are hosted, so I'm not able to inspect them directly.
Fans are not spinning at all.
0 rpm.
These are brand new Ebits.
I'm wondering if this is a hardware or a software issue.
These are hosted, so I'm not able to inspect them directly.
Nothing happening at all? Or is it showing no number for the fan speed?
Fans are not spinning at all and it shows zero for the fan speed.
It ended up being only that the fans were connected in a wrong way.
And little faulty hardware, one hash board fried.
Be sure to do a very careful inspection for the hardware you order from Ebang..
October 26, 2017, 07:34:15 PM
Anyone have any luck getting ssh credentials? I've been asking Lynn without any success. Maybe if more people keep asking her, she will feel some pressure to get them.
No luck at all.
October 26, 2017, 06:03:07 PM
I assume the prices on website are VAT free. Will see when shipment goes through customs as to UK duties.
Hey, did you get it already and know how much you have to pay in top in terms of customs and VAT? October 26, 2017, 04:10:20 PM
I am getting a red "Calculus is too low" indicator on my e9. Does anyone know what this means?
The ebit miners take a while to reach full speed. This error is the miner complaining about running too slow. You will normally see if the first few minutes the miner is running as it ramps up to full speed. You will also see that when one of the hashing boards has gone bad.
October 26, 2017, 04:03:26 PM
I am getting a red "Calculus is too low" indicator on my e9. Does anyone know what this means?
It means the hash rate is lower than the miner should have. Shouldn't be lower than 6ths or so based on the PLL.
October 26, 2017, 02:10:41 PM
I am getting a red "Calculus is too low" indicator on my e9. Does anyone know what this means?
October 26, 2017, 01:23:31 PM
Does anybody have had this problem and able to solve it with the Ebit E9 Plus 9Th/s miner?
Fans are not spinning at all.
0 rpm.
These are brand new Ebits.
I'm wondering if this is a hardware or a software issue.
These are hosted, so I'm not able to inspect them directly.
Fans are not spinning at all.
0 rpm.
These are brand new Ebits.
I'm wondering if this is a hardware or a software issue.
These are hosted, so I'm not able to inspect them directly.
Nothing happening at all? Or is it showing no number for the fan speed?
Fans are not spinning at all and it shows zero for the fan speed.
October 26, 2017, 01:21:25 PM
Does anybody have had this problem and able to solve it with the Ebit E9 Plus 9Th/s miner?
Fans are not spinning at all.
0 rpm.
These are brand new Ebits.
I'm wondering if this is a hardware or a software issue.
These are hosted, so I'm not able to inspect them directly.
Fans are not spinning at all.
0 rpm.
These are brand new Ebits.
I'm wondering if this is a hardware or a software issue.
These are hosted, so I'm not able to inspect them directly.
Nothing happening at all? Or is it showing no number for the fan speed?
October 26, 2017, 01:20:41 PM
Does anybody have had this problem and able to solve it with the Ebit E9 Plus 9Th/s miner?
Fans are not spinning at all.
0 rpm.
These are brand new Ebits.
I'm wondering if this is a hardware or a software issue.
These are hosted, so I'm not able to inspect them directly.
Fans are not spinning at all.
0 rpm.
These are brand new Ebits.
I'm wondering if this is a hardware or a software issue.
These are hosted, so I'm not able to inspect them directly.
One of my E9+ came in with a bad fan. I ordered some extra fans and the connectors should be here shortly. I swapped plugs and the plugs were good- just a bad fan.
October 26, 2017, 11:37:52 AM
Does anybody have had this problem and able to solve it with the Ebit E9 Plus 9Th/s miner?
Fans are not spinning at all.
0 rpm.
These are brand new Ebits.
I'm wondering if this is a hardware or a software issue.
These are hosted, so I'm not able to inspect them directly.
Fans are not spinning at all.
0 rpm.
These are brand new Ebits.
I'm wondering if this is a hardware or a software issue.
These are hosted, so I'm not able to inspect them directly.
October 26, 2017, 01:58:51 AM
new software update *gasp* on the website no less wonder of wonders....
October 25, 2017, 01:49:34 PM
Anyone have any luck getting ssh credentials? I've been asking Lynn without any success. Maybe if more people keep asking her, she will feel some pressure to get them.
October 25, 2017, 12:31:46 PM
just got invoice off Fedex , 232.50 VAT
Ah, not unexpected. Just disappointing
They're quick to be honest.
October 25, 2017, 07:19:26 AM
just got invoice off Fedex , 232.50 VAT
October 24, 2017, 12:05:17 PM
I assume the prices on website are VAT free. Will see when shipment goes through customs as to UK duties.
Yes, you're not being charged Chinese VAT
What I'm curious about is whether you'll be charged UK duties, as not everyone apparently gets charged for it 
October 24, 2017, 10:58:18 AM
I assume the prices on website are VAT free. Will see when shipment goes through customs as to UK duties.
Jump to: