when can we expect a paid firmware?
The paid update is going to need to have extensive "QA" performed on it since the impact of it failing will be large. I do not want to rush it out the door.
I will update as soon as I can.
Thank you,
Jason
Topic: Efudd Z-Series Fuddware 2.3 -Z11/Z11e/Z11j/Z9/Mini - page 38. (Read 45527 times)
The paid update is going to need to have extensive "QA" performed on it since the impact of it failing will be large. I do not want to rush it out the door.
I will update as soon as I can.
Thank you,
Jason
when can we expect a paid firmware?
Jason,
Sorry for the delay. I had POOL 0 and POOL 2 DEAD POOL 1 was working in that situation. You're welcome. Will update the new version. Again Thank you for the firmware.
Mike
Sorry for the delay. I had POOL 0 and POOL 2 DEAD POOL 1 was working in that situation. You're welcome. Will update the new version. Again Thank you for the firmware.
Mike
I just want to say great work here Efudd. I am stable at 675 now for 2 days with fans at 75% running at 69oC. I did want to point out one thing about your "10 minute" mining.. If pool 0 is dead, my miner keeps mining for you, doesn't come back after the first 10 mins. Not sure if you knew about it or not. Thanks again for your hard work.
zx10r07 - In your scenario, was pool0 working and then went offline? Or were you just using pool1 or pool2 and did not expect pool0 to work?
Thank you,
Jason
Ok, I've reproduced this and I know what is happening. I'll work on fixing this, but for now, it can be worked around by not having a dead pool0.
Thank you for reporting it.
Jason
Alright, this is fixed in version 2.0d, which is live now.
Thank you again for reporting this.
Jason
I just want to say great work here Efudd. I am stable at 675 now for 2 days with fans at 75% running at 69oC. I did want to point out one thing about your "10 minute" mining.. If pool 0 is dead, my miner keeps mining for you, doesn't come back after the first 10 mins. Not sure if you knew about it or not. Thanks again for your hard work.
zx10r07 - In your scenario, was pool0 working and then went offline? Or were you just using pool1 or pool2 and did not expect pool0 to work?
Thank you,
Jason
Ok, I've reproduced this and I know what is happening. I'll work on fixing this, but for now, it can be worked around by not having a dead pool0.
Thank you for reporting it.
Jason
I just want to say great work here Efudd. I am stable at 675 now for 2 days with fans at 75% running at 69oC. I did want to point out one thing about your "10 minute" mining.. If pool 0 is dead, my miner keeps mining for you, doesn't come back after the first 10 mins. Not sure if you knew about it or not. Thanks again for your hard work.
zx10r07 - In your scenario, was pool0 working and then went offline? Or were you just using pool1 or pool2 and did not expect pool0 to work?
Thank you,
Jason
I just want to say great work here Efudd. I am stable at 675 now for 2 days with fans at 75% running at 69oC. I did want to point out one thing about your "10 minute" mining.. If pool 0 is dead, my miner keeps mining for you, doesn't come back after the first 10 mins. Not sure if you knew about it or not. Thanks again for your hard work.
zr10r07 - Ah, crap. Someone else had a similar issue, but they had a "unique" way of handling pool management and I could not readily discern the cause or directly reproduce it. I will test this later today and releases a "d" version when I can reproduce and fix it.
Thank you,
Jason
I just want to say great work here Efudd. I am stable at 675 now for 2 days with fans at 75% running at 69oC. I did want to point out one thing about your "10 minute" mining.. If pool 0 is dead, my miner keeps mining for you, doesn't come back after the first 10 mins. Not sure if you knew about it or not. Thanks again for your hard work.
efudd I wrote you a PM offering you help. Check it out!
Ok, thank you.
-j
Ur welcome mate....but you didn't answer
I also have pictures of batch 1&2 boards ready for you...Ok - I will get through my PMs later this weekend.
Thank you,
Jason
Sure thing mate, enjoy ur weekend but just wanted to let you know I have a remote Z9 mini waiting for your FW testing
Regards
Filip
efudd I wrote you a PM offering you help. Check it out!
Ok, thank you.
-j
Ur welcome mate....but you didn't answer
I also have pictures of batch 1&2 boards ready for you...Ok - I will get through my PMs later this weekend.
Thank you,
Jason
efudd I wrote you a PM offering you help. Check it out!
Ok, thank you.
-j
Ur welcome mate....but you didn't answer
I also have pictures of batch 1&2 boards ready for you... efudd I wrote you a PM offering you help. Check it out!
Ok, thank you.
-j
Really appreciate your hard work. I messaged you regarding the unlocked version I received. As far as batch 1 z9. I tried a little research of my own by taking the control board from my 750 hashing batch one mini and placing it on the batch 2 mini and the same issue existed where the hashing would go to zero after some time and could only handle 650 at times. So not sure what they really changed with batch 2 as I assumed all config were stored on the control board.
Thanks
Thanks
I responded to your PM re: unlock/Z9. My understanding, and note I never had a Z9 batch2+ myself - my 12 were all batch1, is that the Batch2s had a hardware change. From the pictures I saw, my best guess is 2 VRMs (voltage regulation modules) were removed which limited the power distribution ability to the boards. Again, just a wild guess.
-j
Hey guys. Just for making things clear. Z9 mini Batch 1 and 2 hashing boards look basically the same to me. I can provide photos of both batches boards front and back.
fliperone, that'd be awesome.
Thank you.
-j
efudd I wrote you a PM offering you help. Check it out!
Really appreciate your hard work. I messaged you regarding the unlocked version I received. As far as batch 1 z9. I tried a little research of my own by taking the control board from my 750 hashing batch one mini and placing it on the batch 2 mini and the same issue existed where the hashing would go to zero after some time and could only handle 650 at times. So not sure what they really changed with batch 2 as I assumed all config were stored on the control board.
Thanks
Thanks
I responded to your PM re: unlock/Z9. My understanding, and note I never had a Z9 batch2+ myself - my 12 were all batch1, is that the Batch2s had a hardware change. From the pictures I saw, my best guess is 2 VRMs (voltage regulation modules) were removed which limited the power distribution ability to the boards. Again, just a wild guess.
-j
Hey guys. Just for making things clear. Z9 mini Batch 1 and 2 hashing boards look basically the same to me. I can provide photos of both batches boards front and back.
I have one of each batch which I can get pics of also to compare The batch 2s are easily determined by the screw in the center of the fan batch 1 and 3 don't have it. Batch 1 firmware on all 3 giving 16+k on batch 1, 15k on batch 2, and 16+ on the batch 3 running 731,687,731 for the freq
Really appreciate your hard work. I messaged you regarding the unlocked version I received. As far as batch 1 z9. I tried a little research of my own by taking the control board from my 750 hashing batch one mini and placing it on the batch 2 mini and the same issue existed where the hashing would go to zero after some time and could only handle 650 at times. So not sure what they really changed with batch 2 as I assumed all config were stored on the control board.
Thanks
Thanks
I responded to your PM re: unlock/Z9. My understanding, and note I never had a Z9 batch2+ myself - my 12 were all batch1, is that the Batch2s had a hardware change. From the pictures I saw, my best guess is 2 VRMs (voltage regulation modules) were removed which limited the power distribution ability to the boards. Again, just a wild guess.
-j
Hey guys. Just for making things clear. Z9 mini Batch 1 and 2 hashing boards look basically the same to me. I can provide photos of both batches boards front and back.
fliperone, that'd be awesome.
Thank you.
-j
alright, i will keep and eye on this thread. hopefully i can get out this z9 some extra $$ to speed up my investment recovery.
Really appreciate your hard work. I messaged you regarding the unlocked version I received. As far as batch 1 z9. I tried a little research of my own by taking the control board from my 750 hashing batch one mini and placing it on the batch 2 mini and the same issue existed where the hashing would go to zero after some time and could only handle 650 at times. So not sure what they really changed with batch 2 as I assumed all config were stored on the control board.
Thanks
Thanks
I responded to your PM re: unlock/Z9. My understanding, and note I never had a Z9 batch2+ myself - my 12 were all batch1, is that the Batch2s had a hardware change. From the pictures I saw, my best guess is 2 VRMs (voltage regulation modules) were removed which limited the power distribution ability to the boards. Again, just a wild guess.
-j
Hey guys. Just for making things clear. Z9 mini Batch 1 and 2 hashing boards look basically the same to me. I can provide photos of both batches boards front and back.
i have batch 2, would it matter or the FW will work as batch 1 z9's ?
Thank you. It will work with any when i'm done. I may have something lined up now.
Jason
i have batch 2, would it matter or the FW will work as batch 1 z9's ?
Folk,
I should have the mini variant out soon. I have the majority of it ready, I just need to get it tested.
Thank you!
Jason
I should have the mini variant out soon. I have the majority of it ready, I just need to get it tested.
Thank you!
Jason
Jump to: