[Enhanced Firmware Mod] Dragon Bitcoin Miner ALL (1T,1.5T,2T) versions

mcmge

newbie

Activity: 113

Merit: 0

Quote from: mxnsch on December 29, 2015, 06:39:51 AM

Dragon Miner 1T Firmware Mod README

Hello,

first, thx for your work!

But i am a absolutly newbee in RasPi and have one question:

What should i do to change from fallover modus to balance?

ssh is working but then i dont know what i have to do.

THX

regards

mcmge

Roninminer

newbie

Activity: 1

Merit: 0

Hello @mxnsch the links to the firmware are not working.

mxnsch

sr. member

Activity: 474

Merit: 252

It means you need to set the cgminer pool address to 127.0.0.1:3333 because that is where the hashes are sent to. In your case, that's a locally listening stratum-proxy. The local stratum-proxy re-routes depending on your config settings automatically. I hope that helps, i don't have any of these devices anymore.

Julian1990

newbie

Activity: 13

Merit: 0

http://192.168.1.254 OR via it's DHCP assigned address at http://$IP[/li][/list]

3.) Last but not least, you must change your pool settings to point cgminer to the local stratum-proxy. The defaults are 127.0.0.1 and port 3333. Restart your Miner with
Code:

shutdown -r now

to apply these settings automatically.

You are DONE! ;-)
"...

Please Help

ds-squad

newbie

Activity: 5

Merit: 0

Hello, can you reupload DragonMiner 2T Original Firmware? Dropbox links doesn't work. Thanks

mxnsch

sr. member

Activity: 474

Merit: 252

Quote from: Palm_Maniac on January 23, 2017, 05:10:27 AM

Hello,

I recently bought a Dragon Miner 1TH / s via ebay and use as a system this firmware here. It uses the CGMiner V3.9.0.1, but it is currently V4.9.2. How would I have to proceed to upgrade the cgminer without equal to destroy the whole firmware?

I am a Linux beginner, so please do it step by step.

Thanks and sorry for my english, it is from Google.

You can't upgrade the cgminer version as it includes proprietary, binary drivers i did not bother reversing.

Unacceptable

legendary

Activity: 2212

Merit: 1001

Quote from: Palm_Maniac on January 23, 2017, 05:10:27 AM

Hello,

I recently bought a Dragon Miner 1TH / s via ebay and use as a system this firmware here. It uses the CGMiner V3.9.0.1, but it is currently V4.9.2. How would I have to proceed to upgrade the cgminer without equal to destroy the whole firmware?

I am a Linux beginner, so please do it step by step.

Thanks and sorry for my english, it is from Google.

Is it working?? Then why mess with it?? Roll Eyes

Palm_Maniac

newbie

Activity: 1

Merit: 0

Hello,

I recently bought a Dragon Miner 1TH / s via ebay and use as a system this firmware here. It uses the CGMiner V3.9.0.1, but it is currently V4.9.2. How would I have to proceed to upgrade the cgminer without equal to destroy the whole firmware?

I am a Linux beginner, so please do it step by step.

Thanks and sorry for my english, it is from Google.

mxnsch

sr. member

Activity: 474

Merit: 252

Quote from: slavadp1 on June 12, 2016, 01:40:21 PM

Please tell me how to overclock and how to connect to the interface to make shh acceleration? Do you already have firmware that you can overclock it to do? And whether the firmware has enabled miners extonce subscribe Huh

It's all explained in the first two posts. Please take your time and read them, it will work!

slavadp1

newbie

Activity: 37

Merit: 0

Please tell me how to overclock and how to connect to the interface to make shh acceleration? Do you already have firmware that you can overclock it to do? And whether the firmware has enabled miners extonce subscribe Huh

mxnsch

sr. member

Activity: 474

Merit: 252

Quote from: dragonminer on April 30, 2016, 10:13:30 PM

i finally got everything to work but then i tried to set an ip and im unable to access it now how can i take out the IP i set in the settings

Can you access the Miner Webgui or Console?
The relevant config file is

Code:

/etc/network/interfaces

You should see the Miners assigned IP in your Routers web interface.

dragonminer

newbie

Activity: 4

Merit: 0

i finally got everything to work but then i tried to set an ip and im unable to access it now how can i take out the IP i set in the settings

dragonminer

newbie

Activity: 4

Merit: 0

still not working i just keep getting "file corrupt" when trying to extract from winrar

this is what i got for sha1sum

1b2fdf0e215c8b47e81925274cde4a8484640009 dragon_miner_mxnschmod_firmwarev1.2_20160108_dhcp.rar

also when typing the the DCHP IP in the address bar do i just put http://$IP because when i do it just brings me to google.

dragonminer

newbie

Activity: 4

Merit: 0

unpoacking with rar when its finished it just says file is corrupt ill download and try again with updated rar

mxnsch

sr. member

Activity: 474

Merit: 252

The files are absolutely fine. How are you unpacking them?

Please try with a recent version of Winrar (>= 5.x)
Check the file SHA1 after download

SHAs - (see top of the thread):
SHA1(dragon_miner_mxnschmod_firmwarev1.2_20160108_ip254.rar)= 5de83e14ced8aa3326d2046a5d5b4a1b95d30a03
SHA1(dragon_miner_mxnschmod_firmwarev1.2_20160108_DHCP.rar)= 1b2fdf0e215c8b47e81925274cde4a8484640009

On Windows:

Code:

FCIV -md5 -sha1 dragon_miner_mxnschmod_firmwarev1.2_20160108_DHCP.rar

The following article will help you certainly:
https://support.microsoft.com/en-us/kb/889768

dragonminer

newbie

Activity: 4

Merit: 0

when i download both mirrors the DHCP ones and i try to open them it just says file corrupted can you please upload another way to download? i need the DHCP becuase my network runs off 10.0.0 and my miner is 192.168.1 please and thank you i also have the dragonminer 1 t/h

mxnsch

sr. member

Activity: 474

Merit: 252

Quote from: tribalfather on April 08, 2016, 09:30:47 AM

I have several of theses 1th/s miners, one had its card wiped by 'accident'. I have been trying to install firmware onto new sd card, have flashed the card so many times it is reporting me to police! This 'easy' process has been sworn at, cursed and almost thrown in bin. Can I purchase the firmware already flashed to a sd card, or can I clone one of the other three (tried simple way- no play today).

Please help, really, really doing head in now.

Thank you in advance

Calm down.
What devices do you own exactly?
How do you wipe a card by accident?
Do the other miners still work?
What Operating System are you using?

tribalfather

newbie

Activity: 1

Merit: 0

I have several of theses 1th/s miners, one had its card wiped by 'accident'. I have been trying to install firmware onto new sd card, have flashed the card so many times it is reporting me to police! This 'easy' process has been sworn at, cursed and almost thrown in bin. Can I purchase the firmware already flashed to a sd card, or can I clone one of the other three (tried simple way- no play today).

Please help, really, really doing head in now.

Thank you in advance

tanyz85

newbie

Activity: 2

Merit: 0

Quote from: mxnsch on March 15, 2016, 09:23:56 AM

I used a XFX ATX ProSeries Black Edition 1250 in the last one, but can recommend any that are 80 PLUS Gold Certified.
Don't try to save a buck on the Power Supply.

i burned a corasir 1000w gold rm series if i remember correctly. they cost a bomb and i dont think i save a buck there though.. lol..

thx for the input.. ill try to find the same psu u have..

mxnsch

sr. member

Activity: 474

Merit: 252

I used a XFX ATX ProSeries Black Edition 1250 in the last one, but can recommend any that are 80 PLUS Gold Certified.
Don't try to save a buck on the Power Supply.

Topic: [Enhanced Firmware Mod] Dragon Bitcoin Miner ALL (1T,1.5T,2T) versions (Read 14740 times)