Error: Transaction creation failed! | Bitcointalksearch.org

Cierra.Cassin

brand new

Activity: 0

Merit: 0

HCP

legendary

Activity: 2086

Merit: 4361

Quote from: bitcoinpizza2020 on December 27, 2020, 03:56:55 PM

I am using mobile and bither generates address starting with 1 as well, but its different from my address.
Can you suggest another site or tool which generates legacy address from private key. Also, for my information, how many addresses can be generated from 1 private key?

You're right, I tried downloading Bither and importing a private key and it asked whether I wanted to use "compressed" or "compressed"... So, you didn't see your address as either option on the "select compressed or uncompressed key" screen? Huh

Does the private key you have start with a "5", "L" or "K"? Huh

bitcoinpizza2020

newbie

Activity: 3

Merit: 0

Thank you very much.

I will open a new topic

hosseinimr93

legendary

Activity: 2380

Merit: 5213

Quote from: bitcoinpizza2020 on December 27, 2020, 03:56:55 PM

I am using mobile and bither generates address starting with 1 as well, but its different from my address.
Can you suggest another site or tool which generates legacy address from private key. Also, for my information, how many addresses can be generated from 1 private key?

Every private key generates a legacy address (starting with 1), a nested segwit address (starting with 3) and a native segwit address (starting with bc1)
If the generated address starts with 1, but it's not your address, you are importing a wrong private key.

You can use electrum.
Download electrum only from its official website and don't forget to verify your download.

And as suggested by ETFbitcoin, please create a new topic if you have any other question.

bitcoinpizza2020

newbie

Activity: 3

Merit: 0

Quote from: HCP on December 27, 2020, 02:39:53 PM

Quote from: bitcoinpizza2020 on December 26, 2020, 10:37:43 AM

I'm getting same error "transaction creation failed."
I last opened core in 2012.

I am able to dump privkey of my address that has btc, but when I import it to bither, it shows some other address.

Am I missing something?

If it's from 2012, no doubt your Bitcoin Core address starts with a "1"... and I'm guessing the address in "bither" starts with either a "3" or "bc1"...

- The "1"-type address is a "Legacy" address
- The "3" and "bc1"-type addresses are "SegWit" addresses.

If this is what is happening, you should use a wallet that supports importing private keys and creating legacy addresses... are you using a desktop or mobile device? Huh

I am using mobile and bither generates address starting with 1 as well, but its different from my address.
Can you suggest another site or tool which generates legacy address from private key. Also, for my information, how many addresses can be generated from 1 private key?

HCP

legendary

Activity: 2086

Merit: 4361

Quote from: bitcoinpizza2020 on December 26, 2020, 10:37:43 AM

I'm getting same error "transaction creation failed."
I last opened core in 2012.

I am able to dump privkey of my address that has btc, but when I import it to bither, it shows some other address.

Am I missing something?

If it's from 2012, no doubt your Bitcoin Core address starts with a "1"... and I'm guessing the address in "bither" starts with either a "3" or "bc1"...

- The "1"-type address is a "Legacy" address
- The "3" and "bc1"-type addresses are "SegWit" addresses.

If this is what is happening, you should use a wallet that supports importing private keys and creating legacy addresses... are you using a desktop or mobile device? Huh

bitcoinpizza2020

newbie

Activity: 3

Merit: 0

I'm getting same error "transaction creation failed."
I last opened core in 2012.

I am able to dump privkey of my address that has btc, but when I import it to bither, it shows some other address.

Am I missing something?

ECore

sr. member

Activity: 420

Merit: 252

https://ubikiri.com/

Quote from: Vexual on August 25, 2013, 04:01:42 PM

Try selecting different inputs and look at how the priority, size and fee changes. Think back to what Danny Hamilton showed you. You'll get the hang of it.

OK...put a stake in this thread. The moral of the story is that small dust transactions suck and I had to pay 0.0181 bitcoin in order to fix the problem in short order.

Vexual

full member

Activity: 196

Merit: 100

Try selecting different inputs and look at how the priority, size and fee changes. Think back to what Danny Hamilton showed you. You'll get the hang of it.

grue

legendary

Activity: 2058

Merit: 1452

Quote from: ECore on August 25, 2013, 10:22:47 AM

they total 0.095 bitcoin. Is that right? If so that is a crazy fee!

please note that fees are based on transaction size, not a fixed percent. If your inputs are less than 0.001 BTC, they're probably not economical to spend.

Quote from: ECore on August 25, 2013, 10:22:47 AM

I'm also trying to upload my wallet to blockchain.info if you think that would work? I believe somebody somewhere along the way has said that would consolidate my dust....

I'm not sure how that would help reduce fees, considering there are still tons of dust inputs.

ECore

sr. member

Activity: 420

Merit: 252

https://ubikiri.com/

Quote from: Vexual on August 25, 2013, 02:09:00 AM

get the coin control release

OK, now what?

When I click on all the outputs under Send / Coin Control Features Inputs

they total 0.095 bitcoin. Is that right? If so that is a crazy fee!

I'm not even sure how to perform the transaction even if I wanted to....at this point I may as well because it has soaked up so much of my time it's ridiculous.

I'm also trying to upload my wallet to blockchain.info if you think that would work? I believe somebody somewhere along the way has said that would consolidate my dust....

Vexual

full member

Activity: 196

Merit: 100

get the coin control release

ECore

sr. member

Activity: 420

Merit: 252

https://ubikiri.com/

Quote from: Vexual on August 24, 2013, 03:56:56 PM

What is the transaction you are attempting to make?

I was attempting to buy silver from agoracommodities with all the bitcoins in my wallet. I'm able to make smaller transactions, but since some of my bitcoins are locked up with dust transactions, I can't transfer all of my bitcoins. I'm not really sure how many I'm able to send really....I would guess all of them but maybe 1 bitcoin.

Vexual

full member

Activity: 196

Merit: 100

What is the transaction you are attempting to make?

ECore

sr. member

Activity: 420

Merit: 252

https://ubikiri.com/

Bump

ECore

sr. member

Activity: 420

Merit: 252

https://ubikiri.com/

Ok. Thanks, but it still does the transaction creation failed.

grue

legendary

Activity: 2058

Merit: 1452

Quote from: ECore on August 22, 2013, 08:04:20 PM

ok, the full path to bitcoin is "C:\Program Files (x86)\Bitcoin\bitcoin-qt.exe".

I can get the command window up, but from there I don't know how to proceed.

1. open windows explorer, type in "C:\Program Files (x86)\Bitcoin\" in the address bar
2. hit enter
3. make sure nothing is selected in the window, shift+right-click a blank area in that window
4. there should be a option in the drop down menu called "open command window here", click it
5. in the command prompt, type in:
bitcoin-qt.exe -rescan
6. hit enter and rescan should commence

ECore

sr. member

Activity: 420

Merit: 252

https://ubikiri.com/

Quote from: Trongersoll on August 22, 2013, 03:44:17 PM

Quote from: ECore on August 22, 2013, 06:26:37 AM

Quote from: Vexual on August 21, 2013, 05:04:04 PM

Command prompt in windows.

Except I don't know how to rescan with a windows command prompt.

I assume that you are starting bitcoin-qt by clicking on a file or icon. look at the properties of what you are clicking on to find the full path to it. then open a command window and do a "cd" to where the file is. then, if i remember right typing: bitcoin-qt -rescan should run it.

ok, the full path to bitcoin is "C:\Program Files (x86)\Bitcoin\bitcoin-qt.exe".

I can get the command window up, but from there I don't know how to proceed.

Trongersoll

hero member

Activity: 490

Merit: 501

Quote from: ECore on August 22, 2013, 06:26:37 AM

Quote from: Vexual on August 21, 2013, 05:04:04 PM

Command prompt in windows.

Except I don't know how to rescan with a windows command prompt.

I assume that you are starting bitcoin-qt by clicking on a file or icon. look at the properties of what you are clicking on to find the full path to it. then open a command window and do a "cd" to where the file is. then, if i remember right typing: bitcoin-qt -rescan should run it.

ECore

sr. member

Activity: 420

Merit: 252

https://ubikiri.com/

Quote from: Vexual on August 21, 2013, 05:04:04 PM

Command prompt in windows.

Except I don't know how to rescan with a windows command prompt.

Topic: Error: Transaction creation failed! (Read 18837 times)