Topic: Erupter Blade V2 issue - not powering on - page 3. (Read 11482 times)
even more interesting is the fact my blades say "REV 2.01" on them as well...
Well mine does say Rev version 2.01
curious... because...
v1:
and then v2:
and what I can tell from your image, is completely different from both...
Well mine does say Rev version 2.01
So here is the type of fuse I have:
And here it is on the board, does not look like it can be removed:
And here it is on the board, does not look like it can be removed:
interesting... did they make a different revision of the v2's?... hmm...
So here is the type of fuse I have:
And here it is on the board, does not look like it can be removed:
And here it is on the board, does not look like it can be removed:
My blade does not exactly look like that, is it a V2 blade? I think I see what you are talking about it has an "R" imprinted on it and is dark red in color and below that has F1 imprinted on the board.
I sent a message to SSB about fuses included in the box.
Thanks
I sent a message to SSB about fuses included in the box.
Thanks
I thought it was, meh, okay, I stopped being lazy...
(ignore the red / white wires, I ran out of yellow / black when I was making that wire longer)
I'll be completely honest with you, since my blades came from SSB as well... I almost threw these out, it looked like an empty baggy at first I didn't pay any attention to it almost did toss them. So if you still have the packaging, I suggest you go look through it, as I've ordered a lot from SSB and he's never failed to send something out (to me at least).
I already blew one fuse about two weeks ago, of which from the blown fuse, I can't even tell it's blown... just that blade didn't work, was about to make a post then I remembered saving the fuses I almost threw out...
My blade does not exactly look like that, is it a V2 blade? I think I see what you are talking about it has an "R" imprinted on it and is dark red in color and below that has F1 imprinted on the board.
I sent a message to SSB about fuses included in the box.
Thanks
I sent a message to SSB about fuses included in the box.
Thanks
Nope no fuses no little baggy, not even sure where a fuse goes on this blade
I would contact the person/company you bought them from...
At the very top-left of this picture, you see a little white SMD fuse right next to the power connection.
(Sorry I tried to get a picture without going and taking a picture off my blades, feeling lazy atm....)
The fuses are very small, SMT/SMD fuses... look like this:
Nope no fuses no little baggy, not even sure where a fuse goes on this blade
replace the fuse, you should have received some extra fuses with each blade in a little baggy.
Does not smell weird still has that new electronics smell and nothing has turned black.
so you did not follow the drawing on the back(bottom)plane ? you most probably plugged 12V to the ground and vice versa ... does it smell weird ? nothing turned black ?
Wonder if someone can help me out, I just received my new blade V2 and I also received my backplane I plugged in my power supply and made sure it was the right model number (HP DPS 800GBA) and installed the blade into slot #1 but no lights from the network connection and when I try the ip address nothing. Looks like I plugged the blade in the wrong way, turned it around but still nothing.
Can anyone help me out,
Thanks
Can anyone help me out,
Thanks
Jump to: